linux-kernel - [PATCH 2/2] arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211123103908.14220-3-rogerq@kernel.org>
Date:   Tue, 23 Nov 2021 12:39:08 +0200
From:   Roger Quadros <rogerq@...nel.org>
To:     nm@...com
Cc:     kishon@...com, vigneshr@...com,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Roger Quadros <rogerq@...nel.org>
Subject: [PATCH 2/2] arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node

The ELM module is used for GPMC NAND accesses for detecting
and correcting errors during reads due to NAND bitflips errors.

4-, 8-, and 16-bit error-correction levels are supported using
the BCH (Bose-ChaudhurI-Hocquenghem) algorithm.

Signed-off-by: Roger Quadros <rogerq@...nel.org>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 7fdd1789568a..340e6b2274c3 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1272,4 +1272,13 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	elm0: ecc@...10000 {
+		compatible = "ti,am3352-elm";
+		reg = <0x00 0x25010000 0x00 0x2000>;
+		interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 54 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 54 0>;
+		clock-names = "fck";
+	};
 };
-- 
2.17.1