linux-kernel - Re: [PATCH 2/4] arm64: dts: qcom: sc7280-crd: Add device tree files for CRD

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YZ0TSeXddm+qGJ0/@google.com>
Date:   Tue, 23 Nov 2021 08:14:01 -0800
From:   Matthias Kaehlcke <mka@...omium.org>
To:     Rajendra Nayak <rnayak@...eaurora.org>
Cc:     agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, sboyd@...eaurora.org,
        dianders@...omium.org, kgodara@...eaurora.org
Subject: Re: [PATCH 2/4] arm64: dts: qcom: sc7280-crd: Add device tree files
 for CRD

On Tue, Nov 23, 2021 at 12:30:11PM +0530, Rajendra Nayak wrote:
> CRD (Compute Reference Design) is a sc7280 based board, largely
> derived from the existing IDP board design with some key deltas
> 1. has EC and H1 over SPI similar to IDP2
> 2. touchscreen and trackpad support
> 3. eDP display
> 
> We just add the barebones dts file here, subsequent patches will
> add support for EC/H1 and other components.
> 
> Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/Makefile       |  1 +
>  arch/arm64/boot/dts/qcom/sc7280-crd.dts | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7280-crd.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 6b816eb..b18708c 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> new file mode 100644
> index 0000000..09d02c2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> @@ -0,0 +1,31 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * sc7280 CRD board device tree source
> + *
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7280-idp.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
> +	compatible = "qcom,sc7280-crd", "google,hoglin-rev0", "qcom,sc7280";

As per my comment on the binding there should also be a "google,hoglin"
without a revision suffix, also it seems there are already CRDs with higher
rev numbers.

> +
> +	aliases {
> +		serial0 = &uart5;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&nvme_pwren {
> +	pins = "gpio51";
> +};
> +
> +&nvme_3v3_regulator {
> +	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
> +};

uber-nit: 'nvme_3v3_regulator' should be before 'nvme_pwren', assuming
alphabetical/ASCII ordering is used.