[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1dbe0c9f-e209-49e1-f05c-765d9f9b91eb@gmail.com>
Date: Wed, 24 Nov 2021 19:32:48 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Arnd Bergmann <arnd@...nel.org>, Vinod Koul <vkoul@...nel.org>
Cc: Arnd Bergmann <arnd@...db.de>, Andy Gross <agross@...nel.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Baolin Wang <baolin.wang7@...il.com>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Chunyan Zhang <zhang.lyra@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hyun Kwon <hyun.kwon@...inx.com>,
Jaroslav Kysela <perex@...ex.cz>,
Jon Hunter <jonathanh@...dia.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Laxman Dewangan <ldewangan@...dia.com>,
Manivannan Sadhasivam <mani@...nel.org>,
Mark Brown <broonie@...nel.org>,
Michal Simek <michal.simek@...inx.com>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Orson Zhai <orsonzhai@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Scott Branden <sbranden@...adcom.com>,
Takashi Iwai <tiwai@...e.com>,
Thierry Reding <thierry.reding@...il.com>,
alsa-devel@...a-project.org, bcm-kernel-feedback-list@...adcom.com,
dmaengine@...r.kernel.org, dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-rpi-kernel@...ts.infradead.org, linux-serial@...r.kernel.org,
linux-spi@...r.kernel.org, linux-staging@...ts.linux.dev,
linux-tegra@...r.kernel.org
Subject: Re: [PATCH v2 01/11] ASoC: tegra20-spdif: stop setting slave_id
23.11.2021 01:21, Arnd Bergmann пишет:
> From: Arnd Bergmann <arnd@...db.de>
>
> The DMA resource is never set up anywhere, and passing this as slave_id
> has not been the proper procedure in a long time.
>
> As a preparation for removing all slave_id references from the ALSA code,
> remove this one.
>
> According to Dmitry Osipenko, this driver has never been used and
> the mechanism for configuring DMA would not work as it is implemented,
> so this part will get rewritten when the driver gets put into use
> again in the future.
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
> ---
> sound/soc/tegra/tegra20_spdif.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
> index 9fdc82d58db3..1c3385da6f82 100644
> --- a/sound/soc/tegra/tegra20_spdif.c
> +++ b/sound/soc/tegra/tegra20_spdif.c
> @@ -284,7 +284,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
> spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
> spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> spdif->playback_dma_data.maxburst = 4;
> - spdif->playback_dma_data.slave_id = dmareq->start;
>
> pm_runtime_enable(&pdev->dev);
>
>
Thanks, Arnd!
The commit message is correct, however you could remove even more code
here. But there is no need to make a v3 just because this patch because
I already prepared patchset that revives this S/PDIF driver and enables
HDMI audio on Tegra20. I'll take care of cleaning up the whole code of
this driver.
diff --git a/sound/soc/tegra/tegra20_spdif.c
b/sound/soc/tegra/tegra20_spdif.c
index 7751575cd6d6..1c3385da6f82 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -251,7 +251,7 @@ static const struct regmap_config
tegra20_spdif_regmap_config = {
static int tegra20_spdif_platform_probe(struct platform_device *pdev)
{
struct tegra20_spdif *spdif;
- struct resource *mem, *dmareq;
+ struct resource *mem;
void __iomem *regs;
int ret;
@@ -273,12 +273,6 @@ static int tegra20_spdif_platform_probe(struct
platform_device *pdev)
if (IS_ERR(regs))
return PTR_ERR(regs);
- dmareq = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dmareq) {
- dev_err(&pdev->dev, "No DMA resource\n");
- return -ENODEV;
- }
-
spdif->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
&tegra20_spdif_regmap_config);
if (IS_ERR(spdif->regmap)) {
@@ -290,7 +284,6 @@ static int tegra20_spdif_platform_probe(struct
platform_device *pdev)
spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
spdif->playback_dma_data.maxburst = 4;
- spdif->playback_dma_data.slave_id = dmareq->start;
pm_runtime_enable(&pdev->dev);
Powered by blists - more mailing lists