[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211124083258.2606511-2-andrej.picej@norik.com>
Date: Wed, 24 Nov 2021 09:32:58 +0100
From: Andrej Picej <andrej.picej@...ik.com>
To: support.opensource@...semi.com, wim@...ux-watchdog.org,
linux@...ck-us.net, linux-watchdog@...r.kernel.org
Cc: andrej.picej@...ik.com, y.bas@...tec.de,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] watchdog: da9062: reset board on watchdog timeout
From: Stefan Christ <s.christ@...tec.de>
In the default fuse configuration the watchdog poweroffs the system
instead of resetting it on a watchdog timeout. This patch changes the
behavior. Now the board is reseted and reboots.
Note: This patch requires that the config register CONFIG_I is
configured as writable in the da9062 multi function device.
Signed-off-by: Stefan Christ <s.christ@...tec.de>
Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
---
drivers/watchdog/da9062_wdt.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c
index f02cbd530538..a04613e68f4a 100644
--- a/drivers/watchdog/da9062_wdt.c
+++ b/drivers/watchdog/da9062_wdt.c
@@ -87,6 +87,20 @@ static int da9062_wdt_start(struct watchdog_device *wdd)
unsigned int selector;
int ret;
+ /*
+ * Use da9062's SHUTDOWN mode instead of POWERDOWN for watchdog reset.
+ * On timeout the PMIC should reset the system, not powering it
+ * off.
+ */
+ ret = regmap_update_bits(wdt->hw->regmap,
+ DA9062AA_CONFIG_I,
+ DA9062AA_WATCHDOG_SD_MASK,
+ DA9062AA_WATCHDOG_SD_MASK);
+ if (ret)
+ dev_err(wdt->hw->dev,
+ "failed to set wdt reset mode. Expect poweroff on watchdog reset: %d\n",
+ ret);
+
selector = da9062_wdt_timeout_to_sel(wdt->wdtdev.timeout);
ret = da9062_wdt_update_timeout_register(wdt, selector);
if (ret)
--
2.25.1
Powered by blists - more mailing lists