lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211125124605.25915-7-pali@kernel.org>
Date:   Thu, 25 Nov 2021 13:45:56 +0100
From:   Pali Rohár <pali@...nel.org>
To:     Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Wilczyński <kw@...ux.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Marek Behún <kabel@...nel.org>
Cc:     linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 06/15] PCI: mvebu: Fix support for bus mastering and PCI_COMMAND on emulated bridge

According to PCI specifications bits [0:2] of Command Register, this should
be by default disabled on reset. So explicitly disable these bits at early
beginning of driver initialization.

Also remove code which unconditionally enables all 3 bits and let kernel
code (via pci_set_master() function) to handle bus mastering of PCI Bridge
via emulated PCI_COMMAND on emulated bridge.

Adjust existing functions mvebu_pcie_handle_iobase_change() and
mvebu_pcie_handle_membase_change() to handle PCI_IO_BASE and PCI_MEM_BASE
registers correctly even when bus mastering on emulated bridge is disabled.

Signed-off-by: Pali Rohár <pali@...nel.org>
Cc: stable@...r.kernel.org
---
 drivers/pci/controller/pci-mvebu.c | 52 ++++++++++++++++++------------
 1 file changed, 32 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index a3df352d440e..32694763e930 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -226,16 +226,14 @@ static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port)
 {
 	u32 cmd, mask;
 
-	/* Point PCIe unit MBUS decode windows to DRAM space. */
-	mvebu_pcie_setup_wins(port);
-
-	/* Master + slave enable. */
+	/* Disable Root Bridge I/O space, memory space and bus mastering. */
 	cmd = mvebu_readl(port, PCIE_CMD_OFF);
-	cmd |= PCI_COMMAND_IO;
-	cmd |= PCI_COMMAND_MEMORY;
-	cmd |= PCI_COMMAND_MASTER;
+	cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 	mvebu_writel(port, cmd, PCIE_CMD_OFF);
 
+	/* Point PCIe unit MBUS decode windows to DRAM space. */
+	mvebu_pcie_setup_wins(port);
+
 	/* Enable interrupt lines A-D. */
 	mask = mvebu_readl(port, PCIE_MASK_OFF);
 	mask |= PCIE_MASK_ENABLE_INTS;
@@ -385,8 +383,7 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 
 	/* Are the new iobase/iolimit values invalid? */
 	if (conf->iolimit < conf->iobase ||
-	    conf->iolimitupper < conf->iobaseupper ||
-	    !(conf->command & PCI_COMMAND_IO)) {
+	    conf->iolimitupper < conf->iobaseupper) {
 		mvebu_pcie_set_window(port, port->io_target, port->io_attr,
 				      &desired, &port->iowin);
 		return;
@@ -423,8 +420,7 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 	struct pci_bridge_emul_conf *conf = &port->bridge.conf;
 
 	/* Are the new membase/memlimit values invalid? */
-	if (conf->memlimit < conf->membase ||
-	    !(conf->command & PCI_COMMAND_MEMORY)) {
+	if (conf->memlimit < conf->membase) {
 		mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
 				      &desired, &port->memwin);
 		return;
@@ -444,6 +440,24 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 			      &port->memwin);
 }
 
+static pci_bridge_emul_read_status_t
+mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+				     int reg, u32 *value)
+{
+	struct mvebu_pcie_port *port = bridge->data;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		*value = mvebu_readl(port, PCIE_CMD_OFF);
+		break;
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+
+	return PCI_BRIDGE_EMUL_HANDLED;
+}
+
 static pci_bridge_emul_read_status_t
 mvebu_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 				     int reg, u32 *value)
@@ -498,17 +512,14 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
 
 	switch (reg) {
 	case PCI_COMMAND:
-	{
-		if (!mvebu_has_ioport(port))
-			conf->command &= ~PCI_COMMAND_IO;
-
-		if ((old ^ new) & PCI_COMMAND_IO)
-			mvebu_pcie_handle_iobase_change(port);
-		if ((old ^ new) & PCI_COMMAND_MEMORY)
-			mvebu_pcie_handle_membase_change(port);
+		if (!mvebu_has_ioport(port)) {
+			conf->command = cpu_to_le16(
+				le16_to_cpu(conf->command) & ~PCI_COMMAND_IO);
+			new &= ~PCI_COMMAND_IO;
+		}
 
+		mvebu_writel(port, new, PCIE_CMD_OFF);
 		break;
-	}
 
 	case PCI_IO_BASE:
 		/*
@@ -575,6 +586,7 @@ mvebu_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 }
 
 static struct pci_bridge_emul_ops mvebu_pci_bridge_emul_ops = {
+	.read_base = mvebu_pci_bridge_emul_base_conf_read,
 	.write_base = mvebu_pci_bridge_emul_base_conf_write,
 	.read_pcie = mvebu_pci_bridge_emul_pcie_conf_read,
 	.write_pcie = mvebu_pci_bridge_emul_pcie_conf_write,
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ