| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211126202144.72936-2-romain.perier@gmail.com>
Date: Fri, 26 Nov 2021 21:21:39 +0100
From: Romain Perier <romain.perier@...il.com>
To: Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Daniel Palmer <daniel@...f.com>,
Romain Perier <romain.perier@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 1/5] clocksource: Add MStar MSC313e timer support
The MSC313e-compatible SoCs have 3 timer hardware blocks. All of these
are free running 32-bit increasing counters and can generate interrupts.
This commit adds basic support for these timers, the first timer block
being used as clocksource/sched_clock and delay, while the others will
be used as clockevents.
Signed-off-by: Romain Perier <romain.perier@...il.com>
Co-developed-by: Daniel Palmer <daniel@...f.com>
Signed-off-by: Daniel Palmer <daniel@...f.com>
---
MAINTAINERS | 1 +
drivers/clocksource/Kconfig | 10 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/timer-msc313e.c | 228 ++++++++++++++++++++++++++++
4 files changed, 240 insertions(+)
create mode 100644 drivers/clocksource/timer-msc313e.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 7a2345ce8521..f39a1617bf50 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2282,6 +2282,7 @@ F: Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
F: arch/arm/boot/dts/mstar-*
F: arch/arm/mach-mstar/
F: drivers/clk/mstar/
+F: drivers/clocksource/timer-msc313e.c
F: drivers/gpio/gpio-msc313.c
F: drivers/rtc/rtc-msc313.c
F: drivers/watchdog/msc313e_wdt.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index f65e31bab9ae..822e711da284 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -671,6 +671,16 @@ config MILBEAUT_TIMER
help
Enables the support for Milbeaut timer driver.
+config MSC313E_TIMER
+ bool "MSC313E timer driver"
+ depends on ARCH_MSTARV7 || COMPILE_TEST
+ select TIMER_OF
+ select CLKSRC_MMIO
+ help
+ Enables support for the MStar MSC313E timer driver.
+ This provides access to multiple interrupt generating
+ programmable 32-bit free running incrementing counters.
+
config INGENIC_TIMER
bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
default MACH_INGENIC
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c17ee32a7151..fa5f624eadb6 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -88,3 +88,4 @@ obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
obj-$(CONFIG_HYPERV_TIMER) += hyperv_timer.o
obj-$(CONFIG_MICROCHIP_PIT64B) += timer-microchip-pit64b.o
+obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o
diff --git a/drivers/clocksource/timer-msc313e.c b/drivers/clocksource/timer-msc313e.c
new file mode 100644
index 000000000000..81f161744349
--- /dev/null
+++ b/drivers/clocksource/timer-msc313e.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MStar timer driver
+ *
+ * Copyright (C) 2021 Daniel Palmer
+ * Copyright (C) 2021 Romain Perier
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/delay.h>
+
+#include "timer-of.h"
+
+#define TIMER_NAME "msc313e_timer"
+
+#define MSC313E_REG_CTRL 0x00
+#define MSC313E_REG_CTRL_TIMER_EN BIT(0)
+#define MSC313E_REG_CTRL_TIMER_TRIG BIT(1)
+#define MSC313E_REG_CTRL_TIMER_INT_EN BIT(8)
+#define MSC313E_REG_TIMER_MAX_LOW 0x08
+#define MSC313E_REG_TIMER_MAX_HIGH 0x0c
+#define MSC313E_REG_COUNTER_LOW 0x10
+#define MSC313E_REG_COUNTER_HIGH 0x14
+
+#define TIMER_SYNC_TICKS 3
+
+struct msc313e_delay {
+ void __iomem *base;
+ struct delay_timer delay;
+};
+
+static void __iomem *msc313e_clksrc;
+static struct msc313e_delay msc313e_delay;
+
+static void msc313e_timer_stop(void __iomem *base)
+{
+ writew(0, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_start(void __iomem *base, bool periodic)
+{
+ u16 reg;
+
+ reg = readw(base + MSC313E_REG_CTRL);
+ if (periodic)
+ reg |= MSC313E_REG_CTRL_TIMER_EN;
+ else
+ reg |= MSC313E_REG_CTRL_TIMER_TRIG;
+ writew(reg | MSC313E_REG_CTRL_TIMER_INT_EN, base + MSC313E_REG_CTRL);
+}
+
+static void msc313e_timer_setup(void __iomem *base, unsigned long delay)
+{
+ writew(delay >> 16, base + MSC313E_REG_TIMER_MAX_HIGH);
+ writew(delay & 0xffff, base + MSC313E_REG_TIMER_MAX_LOW);
+}
+
+static unsigned long msc313e_timer_current_value(void __iomem *base)
+{
+ unsigned long result;
+
+ result = readw(base + MSC313E_REG_COUNTER_LOW);
+ result |= readw(base + MSC313E_REG_COUNTER_HIGH) << 16;
+
+ return result;
+}
+
+static int msc313e_timer_clkevt_shutdown(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_set_oneshot(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_start(timer_of_base(timer), false);
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_set_periodic(struct clock_event_device *evt)
+{
+ struct timer_of *timer = to_timer_of(evt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_setup(timer_of_base(timer), timer_of_period(timer));
+ msc313e_timer_start(timer_of_base(timer), true);
+
+ return 0;
+}
+
+static int msc313e_timer_clkevt_next_event(unsigned long evt, struct clock_event_device *clkevt)
+{
+ struct timer_of *timer = to_timer_of(clkevt);
+
+ msc313e_timer_stop(timer_of_base(timer));
+ msc313e_timer_setup(timer_of_base(timer), evt);
+ msc313e_timer_start(timer_of_base(timer), false);
+
+ return 0;
+}
+
+static irqreturn_t msc313e_timer_clkevt_irq(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static u64 msc313e_timer_clksrc_read(struct clocksource *cs)
+{
+ return msc313e_timer_current_value(msc313e_clksrc) & cs->mask;
+}
+
+static unsigned long msc313e_read_delay_timer_read(void)
+{
+ return msc313e_timer_current_value(msc313e_delay.base);
+}
+
+static u64 msc313e_timer_sched_clock_read(void)
+{
+ return msc313e_timer_current_value(msc313e_clksrc);
+}
+
+static struct clock_event_device msc313e_clkevt = {
+ .name = TIMER_NAME,
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_state_shutdown = msc313e_timer_clkevt_shutdown,
+ .set_state_periodic = msc313e_timer_clkevt_set_periodic,
+ .set_state_oneshot = msc313e_timer_clkevt_set_oneshot,
+ .tick_resume = msc313e_timer_clkevt_shutdown,
+ .set_next_event = msc313e_timer_clkevt_next_event,
+};
+
+static int __init msc313e_clkevt_init(struct device_node *np)
+{
+ int ret;
+ struct timer_of *to;
+
+ to = kzalloc(sizeof(*to), GFP_KERNEL);
+ if (!to)
+ return -ENOMEM;
+
+ to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
+ to->of_irq.handler = msc313e_timer_clkevt_irq;
+ ret = timer_of_init(np, to);
+ if (ret)
+ return ret;
+
+ msc313e_clkevt.cpumask = cpu_possible_mask;
+ msc313e_clkevt.irq = to->of_irq.irq;
+ to->clkevt = msc313e_clkevt;
+
+ clockevents_config_and_register(&to->clkevt, timer_of_rate(to),
+ TIMER_SYNC_TICKS, 0xffffffff);
+ return 0;
+}
+
+static int __init msc313e_clksrc_init(struct device_node *np)
+{
+ struct timer_of to = { 0 };
+ int ret;
+ u16 reg;
+
+ to.flags = TIMER_OF_BASE | TIMER_OF_CLOCK;
+ ret = timer_of_init(np, &to);
+ if (ret)
+ return ret;
+
+ msc313e_delay.base = timer_of_base(&to);
+ msc313e_delay.delay.read_current_timer = msc313e_read_delay_timer_read;
+ msc313e_delay.delay.freq = timer_of_rate(&to);
+
+ msc313e_clksrc = timer_of_base(&to);
+ reg = readw(msc313e_clksrc + MSC313E_REG_CTRL);
+ reg |= MSC313E_REG_CTRL_TIMER_EN;
+ writew(reg, msc313e_clksrc + MSC313E_REG_CTRL);
+
+ register_current_timer_delay(&msc313e_delay.delay);
+
+ sched_clock_register(msc313e_timer_sched_clock_read, 32, timer_of_rate(&to));
+ return clocksource_mmio_init(timer_of_base(&to), TIMER_NAME, timer_of_rate(&to), 300, 32,
+ msc313e_timer_clksrc_read);
+}
+
+static int __init msc313e_timer_init(struct device_node *np)
+{
+ int ret = 0;
+ static int num_called;
+
+ switch (num_called) {
+ case 0:
+ ret = msc313e_clksrc_init(np);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ ret = msc313e_clkevt_init(np);
+ if (ret)
+ return ret;
+ break;
+ }
+
+ num_called++;
+
+ return 0;
+}
+
+TIMER_OF_DECLARE(msc313, "mstar,msc313e-timer", msc313e_timer_init);
--
2.33.0
Powered by blists - more mailing lists