[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87fba93f-3813-87e2-9746-55c2393bde95@huawei.com>
Date: Sat, 27 Nov 2021 09:35:40 +0800
From: "libaokun (A)" <libaokun1@...wei.com>
To: Sergei Shtylyov <sergei.shtylyov@...il.com>,
<damien.lemoal@...nsource.wdc.com>, <axboe@...nel.dk>,
<tj@...nel.org>, <linux-ide@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <yebin10@...wei.com>, <yukuai3@...wei.com>,
<stable@...r.kernel.org>, Hulk Robot <hulkci@...wei.com>
Subject: Re: [PATCH -next V5 1/2] sata_fsl: fix UAF in sata_fsl_port_stop when
rmmod sata_fsl
在 2021/11/27 3:43, Sergei Shtylyov 写道:
> On 11/26/21 5:03 AM, Baokun Li wrote:
>
>> When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux,
>> a bug is reported:
>> ==================================================================
>> BUG: Unable to handle kernel data access on read at 0x80000800805b502c
>> Oops: Kernel access of bad area, sig: 11 [#1]
>> NIP [c0000000000388a4] .ioread32+0x4/0x20
>> LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl]
>> Call Trace:
>> .free_irq+0x1c/0x4e0 (unreliable)
>> .ata_host_stop+0x74/0xd0 [libata]
>> .release_nodes+0x330/0x3f0
>> .device_release_driver_internal+0x178/0x2c0
>> .driver_detach+0x64/0xd0
>> .bus_remove_driver+0x70/0xf0
>> .driver_unregister+0x38/0x80
>> .platform_driver_unregister+0x14/0x30
>> .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
>> .__se_sys_delete_module+0x1ec/0x2d0
>> .system_call_exception+0xfc/0x1f0
>> system_call_common+0xf8/0x200
>> ==================================================================
>>
>> The triggering of the BUG is shown in the following stack:
>>
>> driver_detach
>> device_release_driver_internal
>> __device_release_driver
>> drv->remove(dev) --> platform_drv_remove/platform_remove
>> drv->remove(dev) --> sata_fsl_remove
>> iounmap(host_priv->hcr_base); <---- unmap
>> kfree(host_priv); <---- free
>> devres_release_all
>> release_nodes
>> dr->node.release(dev, dr->data) --> ata_host_stop
>> ap->ops->port_stop(ap) --> sata_fsl_port_stop
>> ioread32(hcr_base + HCONTROL) <---- UAF
>> host->ops->host_stop(host)
>>
>> The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should
>> not be executed in drv->remove. These functions should be executed in
>> host_stop after port_stop. Therefore, we move these functions to the
>> new function sata_fsl_host_stop and bind the new function to host_stop.
>>
>> Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
>> Cc: stable@...r.kernel.org
>> Reported-by: Hulk Robot <hulkci@...wei.com>
>> Signed-off-by: Baokun Li <libaokun1@...wei.com>
> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@...il.com>
>
> MBR, Sergei
> .
Thank you for your review.
--
With Best Regards,
Baokun Li
.
Powered by blists - more mailing lists