linux-kernel - [PATCH V3 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211128125011.12817-1-aford173@gmail.com>
Date:   Sun, 28 Nov 2021 06:50:07 -0600
From:   Adam Ford <aford173@...il.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     laurent.pinchart@...asonboard.com, tharvey@...eworks.com,
        aford@...conembedded.com, Adam Ford <aford173@...il.com>,
        Fabio Estevam <festevam@...il.com>,
        Lucas Stach <l.stach@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>, Peng Fan <peng.fan@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH V3 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset

Most of the blk-ctrl reset bits are found in one register, however
there are two bits in offset 8 for pulling the MIPI DPHY out of reset
and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
out of reset or the MIPI_CSI hangs.

Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.

Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
Signed-off-by: Adam Ford <aford173@...il.com>
Reviewed-by: Fabio Estevam <festevam@...il.com>
Reviewed-by: Lucas Stach <l.stach@...gutronix.de>
---
V3:  Split the  mipi_phy_rst_mask for CSI and DSI into their respective domains.

V2:  Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL
     Rename the new register to mipi_phy_rst_mask
     Encapsulate the edits to this register with an if-statement
     
 drivers/soc/imx/imx8m-blk-ctrl.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 519b3651d1d9..c2f076b56e24 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -17,6 +17,7 @@
 
 #define BLK_SFT_RSTN	0x0
 #define BLK_CLK_EN	0x4
+#define BLK_MIPI_RESET_DIV	0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
 
 struct imx8m_blk_ctrl_domain;
 
@@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
 	const char *gpc_name;
 	u32 rst_mask;
 	u32 clk_mask;
+
+	/*
+	 * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
+	 * which is used to control the reset for the MIPI Phy.
+	 * Since it's only present in certain circumstances,
+	 * an if-statement should be used before setting and clearing this
+	 * register.
+	 */
+	u32 mipi_phy_rst_mask;
 };
 
 #define DOMAIN_MAX_CLKS 3
@@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
 
 	/* put devices into reset */
 	regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+	if (data->mipi_phy_rst_mask)
+		regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
 
 	/* enable upstream and blk-ctrl clocks to allow reset to propagate */
 	ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
@@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
 
 	/* release reset */
 	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
+	if (data->mipi_phy_rst_mask)
+		regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
 
 	/* disable upstream clocks */
 	clk_bulk_disable_unprepare(data->num_clks, domain->clks);
@@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
 	struct imx8m_blk_ctrl *bc = domain->bc;
 
 	/* put devices into reset and disable clocks */
+	if (data->mipi_phy_rst_mask)
+		regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
+
 	regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
 	regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
 
@@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
 		.gpc_name = "mipi-dsi",
 		.rst_mask = BIT(5),
 		.clk_mask = BIT(8) | BIT(9),
+		.mipi_phy_rst_mask = BIT(17),
 	},
 	[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
 		.name = "dispblk-mipi-csi",
@@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
 		.gpc_name = "mipi-csi",
 		.rst_mask = BIT(3) | BIT(4),
 		.clk_mask = BIT(10) | BIT(11),
+		.mipi_phy_rst_mask = BIT(16),
 	},
 };
 
-- 
2.32.0