linux-kernel - Re: [PATCH V3 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YaORfba924MN9vL+@pendragon.ideasonboard.com>
Date:   Sun, 28 Nov 2021 16:26:05 +0200
From:   Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:     Adam Ford <aford173@...il.com>
Cc:     linux-arm-kernel@...ts.infradead.org, tharvey@...eworks.com,
        aford@...conembedded.com, Fabio Estevam <festevam@...il.com>,
        Lucas Stach <l.stach@...gutronix.de>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        NXP Linux Team <linux-imx@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>, Peng Fan <peng.fan@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V3 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset

Hi Adam,

Thank you for the patch.

On Sun, Nov 28, 2021 at 06:50:07AM -0600, Adam Ford wrote:
> Most of the blk-ctrl reset bits are found in one register, however
> there are two bits in offset 8 for pulling the MIPI DPHY out of reset
> and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
> out of reset or the MIPI_CSI hangs.
> 
> Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.

The patch looks good to me. I however wonder if we should clear those
two bits at probe time, in order to start in a known state.

With or without that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>

> Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
> Signed-off-by: Adam Ford <aford173@...il.com>
> Reviewed-by: Fabio Estevam <festevam@...il.com>
> Reviewed-by: Lucas Stach <l.stach@...gutronix.de>
> ---
> V3:  Split the  mipi_phy_rst_mask for CSI and DSI into their respective domains.
> 
> V2:  Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL
>      Rename the new register to mipi_phy_rst_mask
>      Encapsulate the edits to this register with an if-statement
>      
>  drivers/soc/imx/imx8m-blk-ctrl.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index 519b3651d1d9..c2f076b56e24 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -17,6 +17,7 @@
>  
>  #define BLK_SFT_RSTN	0x0
>  #define BLK_CLK_EN	0x4
> +#define BLK_MIPI_RESET_DIV	0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
>  
>  struct imx8m_blk_ctrl_domain;
>  
> @@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
>  	const char *gpc_name;
>  	u32 rst_mask;
>  	u32 clk_mask;
> +
> +	/*
> +	 * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
> +	 * which is used to control the reset for the MIPI Phy.
> +	 * Since it's only present in certain circumstances,
> +	 * an if-statement should be used before setting and clearing this
> +	 * register.
> +	 */
> +	u32 mipi_phy_rst_mask;
>  };
>  
>  #define DOMAIN_MAX_CLKS 3
> @@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
>  
>  	/* put devices into reset */
>  	regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> +	if (data->mipi_phy_rst_mask)
> +		regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
>  
>  	/* enable upstream and blk-ctrl clocks to allow reset to propagate */
>  	ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> @@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
>  
>  	/* release reset */
>  	regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> +	if (data->mipi_phy_rst_mask)
> +		regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
>  
>  	/* disable upstream clocks */
>  	clk_bulk_disable_unprepare(data->num_clks, domain->clks);
> @@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
>  	struct imx8m_blk_ctrl *bc = domain->bc;
>  
>  	/* put devices into reset and disable clocks */
> +	if (data->mipi_phy_rst_mask)
> +		regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> +
>  	regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
>  	regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
>  
> @@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
>  		.gpc_name = "mipi-dsi",
>  		.rst_mask = BIT(5),
>  		.clk_mask = BIT(8) | BIT(9),
> +		.mipi_phy_rst_mask = BIT(17),
>  	},
>  	[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
>  		.name = "dispblk-mipi-csi",
> @@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
>  		.gpc_name = "mipi-csi",
>  		.rst_mask = BIT(3) | BIT(4),
>  		.clk_mask = BIT(10) | BIT(11),
> +		.mipi_phy_rst_mask = BIT(16),
>  	},
>  };
>  

-- 
Regards,

Laurent Pinchart