| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b6b33f15-ead3-d703-47bb-44a1350c0936@gmail.com>
Date: Sun, 28 Nov 2021 12:00:11 -0500
From: Jesse Taube <mr.bossman075@...il.com>
To: Rob Herring <robh@...nel.org>
Cc: linux-imx@....com, mturquette@...libre.com, sboyd@...nel.org,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, ulf.hansson@...aro.org, aisheng.dong@....com,
stefan@...er.ch, linus.walleij@...aro.org,
gregkh@...uxfoundation.org, arnd@...db.de, olof@...om.net,
soc@...nel.org, linux@...linux.org.uk, abel.vesa@....com,
adrian.hunter@...el.com, jirislaby@...nel.org,
giulio.benetti@...ettiengineering.com,
nobuhiro1.iwamatsu@...hiba.co.jp, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-serial@...r.kernel.org
Subject: Re: [PATCH v3 12/13] ARM: dts: imx: add i.MXRT1050-EVK support
On 11/28/21 11:43, Rob Herring wrote:
> On Thu, Nov 25, 2021 at 04:14:42PM -0500, Jesse Taube wrote:
>> From: Giulio Benetti <giulio.benetti@...ettiengineering.com>
>>
>> The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
>> evaluation of the i.MXRT, which features NXP's implementation of the Arm
>> Cortex-M7 core.
>>
>> The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
>> USB 2.0 OTG.
>>
>> This patch aims to support the preliminary booting up features
>> as follows:
>> GPIO
>> LPUART
>> SD/MMC
>>
>> Signed-off-by: Giulio Benetti <giulio.benetti@...ettiengineering.com>
>> Signed-off-by: Jesse Taube <Mr.Bossman075@...il.com>
>> [Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl]
>> ---
>> V1->V2:
>> * dtsi: Add clock parent definitions
>> * dtsi: Change hex values to lowercase
>> * dtsi: Move anatop definition from driver
>> * dts: Remove unused pin controll (semc)
>> * dts: Use moved pin controll header
>> * Move aliases from dtsi to dts
>> * Change commit description
>> * Change licence to "GPL-2.0+ OR MIT"
>> V2->V3:
>> * Remove bootargs, comments, unused container
>> * Remove unnecessary new lines
>> * Rename imxrt to imxrt1050 for seiral and mmc
>> * GPT uses own clock
>> * fix memory@0
>> * Change GPT compatible handles
>> ---
>> arch/arm/boot/dts/Makefile | 2 +
>> arch/arm/boot/dts/imxrt1050-evk.dts | 72 ++++++++++++
>> arch/arm/boot/dts/imxrt1050.dtsi | 165 ++++++++++++++++++++++++++++
>> 3 files changed, 239 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imxrt1050-evk.dts
>> create mode 100644 arch/arm/boot/dts/imxrt1050.dtsi
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 8a2dfdf01ce3..d539bf7daa86 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -723,6 +723,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
>> dtb-$(CONFIG_SOC_IMX7ULP) += \
>> imx7ulp-com.dtb \
>> imx7ulp-evk.dtb
>> +dtb-$(CONFIG_SOC_IMXRT) += \
>> + imxrt1050-evk.dtb
>> dtb-$(CONFIG_SOC_LS1021A) += \
>> ls1021a-moxa-uc-8410a.dtb \
>> ls1021a-qds.dtb \
>> diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts
>> new file mode 100644
>> index 000000000000..6a9c10decf52
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imxrt1050-evk.dts
>> @@ -0,0 +1,72 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2019
>> + * Author(s): Giulio Benetti <giulio.benetti@...ettiengineering.com>
>> + */
>> +
>> +/dts-v1/;
>> +#include "imxrt1050.dtsi"
>> +#include "imxrt1050-pinfunc.h"
>> +
>> +/ {
>> + model = "NXP IMXRT1050-evk board";
>> + compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
>> +
>> + chosen {
>> + stdout-path = &lpuart1;
>> + };
>> +
>> + aliases {
>> + gpio0 = &gpio1;
>> + gpio1 = &gpio2;
>> + gpio2 = &gpio3;
>> + gpio3 = &gpio4;
>> + gpio4 = &gpio5;
>> + mmc0 = &usdhc1;
>> + serial0 = &lpuart1;
>> + };
>> +
>> + memory@...00000 {
>> + device_type = "memory";
>> + reg = <0x80000000 0x2000000>;
>> + };
>> +};
>> +
>> +&lpuart1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_lpuart1>;
>> + status = "okay";
>> +};
>> +
>> +&iomuxc {
>> + pinctrl-names = "default";
>> + pinctrl_lpuart1: lpuart1grp {
>> + fsl,pins = <
>> + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
>> + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
>> + >;
>> + };
>> +
>> + pinctrl_usdhc0: usdhc0grp {
>> + fsl,pins = <
>> + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
>> + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
>> + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
>> + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
>> + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
>> + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
>> + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
>> + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
>> + >;
>> + };
>> +};
>> +
>> +&usdhc1 {
>> + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
>> + pinctrl-0 = <&pinctrl_usdhc0>;
>> + pinctrl-1 = <&pinctrl_usdhc0>;
>> + pinctrl-2 = <&pinctrl_usdhc0>;
>> + pinctrl-3 = <&pinctrl_usdhc0>;
>> + cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
>> + status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
>> new file mode 100644
>> index 000000000000..35943a6896fa
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imxrt1050.dtsi
>> @@ -0,0 +1,165 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (C) 2019
>> + * Author(s): Giulio Benetti <giulio.benetti@...ettiengineering.com>
>> + */
>> +
>> +#include "armv7-m.dtsi"
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/imxrt1050-clock.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> +
>> + clocks {
>> + osc: osc {
>> + compatible = "fsl,imx-osc", "fixed-clock";
>
> fsl,imx-osc is not documented. IMO, just drop it.
Other imx device trees have it, should i still?
>
>> + #clock-cells = <0>;
>> + clock-frequency = <24000000>;
>> + };
>> + };
>> +
>> + cpus {
>> + #address-cells = <0x01>;
>> + #size-cells = <0x00>;
>> +
>> + cpu@0 {
>> + compatible = "arm,cortex-m7";
>
> Not documented.
>
> Please run schema validation checks and don't add any new warnings not
> already present for i.MX.
Ah sorry was from u-boot.
>
>> + device_type = "cpu";
>> + reg = <0x00>;
>> + };
>> + };
>> +
>> + soc {
>> + lpuart1: serial@...84000 {
>> + compatible = "fsl,imxrt1050-lpuart","fsl,imx8mm-uart", "fsl,imx6q-uart";
>
> space ^
>
>> + reg = <0x40184000 0x4000>;
>> + interrupts = <20>;
>> + clocks = <&clks IMXRT1050_CLK_LPUART1>;
>> + clock-names = "ipg";
>> + status = "disabled";
>> + };
>> +
>> + iomuxc: iomuxc@...f8000 {
>
> pinctrl@...
>
>> + compatible = "fsl,imxrt1050-iomuxc";
>> + reg = <0x401f8000 0x4000>;
>> + fsl,mux_mask = <0x7>;
>> + };
>> +
>> + anatop: anatop@...d8000 {
>> + compatible = "fsl,imxrt-anatop";
>> + reg = <0x400d8000 0x4000>;
>> + };
>> +
>> + clks: ccm@...fc000 {
>
> clock-controller@...
>
>> + compatible = "fsl,imxrt1050-ccm";
>> + reg = <0x400fc000 0x4000>;
>> + interrupts = <95>, <96>;
>> + clocks = <&osc>;
>> + clock-names = "osc";
>> + #clock-cells = <1>;
>> + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
>> + <&clks IMXRT1050_CLK_PLL1_BYPASS>,
>> + <&clks IMXRT1050_CLK_PLL2_BYPASS>,
>> + <&clks IMXRT1050_CLK_PLL3_BYPASS>,
>> + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
>> + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
>> + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
>> + <&clks IMXRT1050_CLK_PLL1_ARM>,
>> + <&clks IMXRT1050_CLK_PLL2_SYS>,
>> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
>> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
>> + <&clks IMXRT1050_CLK_PLL2_SYS>;
>> + };
>> +
>> + edma1: dma-controller@...e8000 {
>> + #dma-cells = <2>;
>> + compatible = "fsl,imx7ulp-edma";
>> + reg = <0x400e8000 0x4000>,
>> + <0x400ec000 0x4000>;
>> + dma-channels = <32>;
>> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
>> + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
>> + clock-names = "dma", "dmamux0";
>> + clocks = <&clks IMXRT1050_CLK_DMA>,
>> + <&clks IMXRT1050_CLK_DMA_MUX>;
>> + };
>> +
>> + usdhc1: mmc@...c0000 {
>> + compatible ="fsl,imxrt1050-usdhc";
>> + reg = <0x402c0000 0x4000>;
>> + interrupts = <110>;
>> + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
>> + <&clks IMXRT1050_CLK_OSC>,
>> + <&clks IMXRT1050_CLK_USDHC1>;
>> + clock-names = "ipg", "ahb", "per";
>> + bus-width = <4>;
>> + fsl,wp-controller;
>> + no-1-8-v;
>> + max-frequency = <4000000>;
>> + fsl,tuning-start-tap = <20>;
>> + fsl,tuning-step= <2>;
>> + status = "disabled";
>> + };
>> +
>> + gpio1: gpio@...b8000 {
>> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>
> Not SoC specific?
fsl,imxrt-gpio is a placeholder, it is compatible with imx35.
>
>> + reg = <0x401b8000 0x4000>;
>> + interrupts = <80>, <81>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio2: gpio@...bc000 {
>> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>> + reg = <0x401bc000 0x4000>;
>> + interrupts = <82>, <83>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio3: gpio@...c0000 {
>> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>> + reg = <0x401c0000 0x4000>;
>> + interrupts = <84>, <85>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio4: gpio@...c4000 {
>> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>> + reg = <0x401c4000 0x4000>;
>> + interrupts = <86>, <87>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio5: gpio@...c0000 {
>> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
>> + reg = <0x400c0000 0x4000>;
>> + interrupts = <88>, <89>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpt: timer@...ec000 {
>> + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
>> + reg = <0x401ec000 0x4000>;
>> + interrupts = <100>;
>> + clocks = <&clks IMXRT1050_CLK_GPT>;
>> + clock-names = "per";
>> + };
>> + };
>> +};
>> --
>> 2.34.0
>>
>>
Powered by blists - more mailing lists