[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <18772611-59f8-57ad-581d-40ea71d3d706@bitmer.com>
Date: Sun, 28 Nov 2021 20:43:14 +0200
From: Jarkko Nikula <jarkko.nikula@...mer.com>
To: Tony Lindgren <tony@...mide.com>, linux-omap@...r.kernel.org
Cc: BenoƮt Cousson <bcousson@...libre.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH] ARM: dts: Fix timer regression for beagleboard revision c
On 25.11.2021 16.48, Tony Lindgren wrote:
> Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
> caused a timer regression for beagleboard revision c where the system
> clockevent stops working if omap3isp module is unloaded.
>
> Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
> applied that limit the usable timers for no good reason. This also affects
> the power management as we use the system clock instead of the 32k clock
> source.
>
> Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
> quirks. This allows us to remove the timer quirks for later beagleboard
> revisions. We also need to update the related timer quirk check for the
> correct compatible property.
>
> Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
> Cc: linux-kernel@...r.kernel.org
> Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
> Cc: Thomas Gleixner <tglx@...utronix.de>
> Cc: Rob Herring <robh+dt@...nel.org>
> Reported-by: Jarkko Nikula <jarkko.nikula@...mer.com>
> Signed-off-by: Tony Lindgren <tony@...mide.com>
> ---
> .../devicetree/bindings/arm/omap/omap.txt | 3 ++
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/omap3-beagle-ab4.dts | 47 +++++++++++++++++++
> arch/arm/boot/dts/omap3-beagle.dts | 33 -------------
> drivers/clocksource/timer-ti-dm-systimer.c | 2 +-
> 5 files changed, 52 insertions(+), 34 deletions(-)
> create mode 100644 arch/arm/boot/dts/omap3-beagle-ab4.dts
>
I trust Tony got this working since I lent the board for him to look at
this regression since our earlier remote attempts didn't find a working fix.
Jarkko
Powered by blists - more mailing lists