lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 29 Nov 2021 19:17:33 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Pali Rohár <pali@...nel.org>,
        Marek Behún <kabel@...nel.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Subject: [PATCH 5.15 059/179] PCI: aardvark: Implement re-issuing config requests on CRS response

From: Pali Rohár <pali@...nel.org>

commit 223dec14a05337a4155f1deed46d2becce4d00fd upstream.

Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed
handling of CRS response and when CRSSVE flag was not enabled it marked CRS
response as failed transaction (due to simplicity).

But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
for PIO config response and so we can with a small change implement
re-issuing of config requests as described in PCIe base specification.

This change implements re-issuing of config requests when response is CRS.
Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
transaction is marked as failed and an all-ones value is returned as
before.

We do this by returning appropriate error codes from function
advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
reissues transaction.

Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@...nel.org>
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Reviewed-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/pci/controller/pci-aardvark.c |   69 +++++++++++++++++++++-------------
 1 file changed, 44 insertions(+), 25 deletions(-)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -692,6 +692,7 @@ static int advk_pcie_check_pio_status(st
 	u32 reg;
 	unsigned int status;
 	char *strcomp_status, *str_posted;
+	int ret;
 
 	reg = advk_readl(pcie, PIO_STAT);
 	status = (reg & PIO_COMPLETION_STATUS_MASK) >>
@@ -716,6 +717,7 @@ static int advk_pcie_check_pio_status(st
 	case PIO_COMPLETION_STATUS_OK:
 		if (reg & PIO_ERR_STATUS) {
 			strcomp_status = "COMP_ERR";
+			ret = -EFAULT;
 			break;
 		}
 		/* Get the read result */
@@ -723,9 +725,11 @@ static int advk_pcie_check_pio_status(st
 			*val = advk_readl(pcie, PIO_RD_DATA);
 		/* No error */
 		strcomp_status = NULL;
+		ret = 0;
 		break;
 	case PIO_COMPLETION_STATUS_UR:
 		strcomp_status = "UR";
+		ret = -EOPNOTSUPP;
 		break;
 	case PIO_COMPLETION_STATUS_CRS:
 		if (allow_crs && val) {
@@ -743,6 +747,7 @@ static int advk_pcie_check_pio_status(st
 			 */
 			*val = CFG_RD_CRS_VAL;
 			strcomp_status = NULL;
+			ret = 0;
 			break;
 		}
 		/* PCIe r4.0, sec 2.3.2, says:
@@ -758,21 +763,24 @@ static int advk_pcie_check_pio_status(st
 		 * Request and taking appropriate action, e.g., complete the
 		 * Request to the host as a failed transaction.
 		 *
-		 * To simplify implementation do not re-issue the Configuration
-		 * Request and complete the Request as a failed transaction.
+		 * So return -EAGAIN and caller (pci-aardvark.c driver) will
+		 * re-issue request again up to the PIO_RETRY_CNT retries.
 		 */
 		strcomp_status = "CRS";
+		ret = -EAGAIN;
 		break;
 	case PIO_COMPLETION_STATUS_CA:
 		strcomp_status = "CA";
+		ret = -ECANCELED;
 		break;
 	default:
 		strcomp_status = "Unknown";
+		ret = -EINVAL;
 		break;
 	}
 
 	if (!strcomp_status)
-		return 0;
+		return ret;
 
 	if (reg & PIO_NON_POSTED_REQ)
 		str_posted = "Non-posted";
@@ -782,7 +790,7 @@ static int advk_pcie_check_pio_status(st
 	dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
 		str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
 
-	return -EFAULT;
+	return ret;
 }
 
 static int advk_pcie_wait_pio(struct advk_pcie *pcie)
@@ -790,13 +798,13 @@ static int advk_pcie_wait_pio(struct adv
 	struct device *dev = &pcie->pdev->dev;
 	int i;
 
-	for (i = 0; i < PIO_RETRY_CNT; i++) {
+	for (i = 1; i <= PIO_RETRY_CNT; i++) {
 		u32 start, isr;
 
 		start = advk_readl(pcie, PIO_START);
 		isr = advk_readl(pcie, PIO_ISR);
 		if (!start && isr)
-			return 0;
+			return i;
 		udelay(PIO_RETRY_DELAY);
 	}
 
@@ -1068,6 +1076,7 @@ static int advk_pcie_rd_conf(struct pci_
 			     int where, int size, u32 *val)
 {
 	struct advk_pcie *pcie = bus->sysdata;
+	int retry_count;
 	bool allow_crs;
 	u32 reg;
 	int ret;
@@ -1110,16 +1119,22 @@ static int advk_pcie_rd_conf(struct pci_
 	/* Program the data strobe */
 	advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
 
-	/* Clear PIO DONE ISR and start the transfer */
-	advk_writel(pcie, 1, PIO_ISR);
-	advk_writel(pcie, 1, PIO_START);
-
-	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
-		goto try_crs;
+	retry_count = 0;
+	do {
+		/* Clear PIO DONE ISR and start the transfer */
+		advk_writel(pcie, 1, PIO_ISR);
+		advk_writel(pcie, 1, PIO_START);
+
+		ret = advk_pcie_wait_pio(pcie);
+		if (ret < 0)
+			goto try_crs;
+
+		retry_count += ret;
+
+		/* Check PIO status and get the read result */
+		ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
 
-	/* Check PIO status and get the read result */
-	ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
 	if (ret < 0)
 		goto fail;
 
@@ -1151,6 +1166,7 @@ static int advk_pcie_wr_conf(struct pci_
 	struct advk_pcie *pcie = bus->sysdata;
 	u32 reg;
 	u32 data_strobe = 0x0;
+	int retry_count;
 	int offset;
 	int ret;
 
@@ -1192,19 +1208,22 @@ static int advk_pcie_wr_conf(struct pci_
 	/* Program the data strobe */
 	advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
 
-	/* Clear PIO DONE ISR and start the transfer */
-	advk_writel(pcie, 1, PIO_ISR);
-	advk_writel(pcie, 1, PIO_START);
+	retry_count = 0;
+	do {
+		/* Clear PIO DONE ISR and start the transfer */
+		advk_writel(pcie, 1, PIO_ISR);
+		advk_writel(pcie, 1, PIO_START);
+
+		ret = advk_pcie_wait_pio(pcie);
+		if (ret < 0)
+			return PCIBIOS_SET_FAILED;
 
-	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
-		return PCIBIOS_SET_FAILED;
+		retry_count += ret;
 
-	ret = advk_pcie_check_pio_status(pcie, false, NULL);
-	if (ret < 0)
-		return PCIBIOS_SET_FAILED;
+		ret = advk_pcie_check_pio_status(pcie, false, NULL);
+	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
 
-	return PCIBIOS_SUCCESSFUL;
+	return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
 }
 
 static struct pci_ops advk_pcie_ops = {


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ