[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211129181708.867120051@linuxfoundation.org>
Date: Mon, 29 Nov 2021 19:18:12 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Marek Behún <kabel@...nel.org>,
Rob Herring <robh@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH 5.4 43/92] pinctrl: armada-37xx: Correct PWM pins definitions
From: Marek Behún <kabel@...nel.org>
commit baf8d6899b1e8906dc076ef26cc633e96a8bb0c3 upstream.
The PWM pins on North Bridge on Armada 37xx can be configured into PWM
or GPIO functions. When in PWM function, each pin can also be configured
to drive low on 0 and tri-state on 1 (LED mode).
The current definitions handle this by declaring two pin groups for each
pin:
- group "pwmN" with functions "pwm" and "gpio"
- group "ledN_od" ("od" for open drain) with functions "led" and "gpio"
This is semantically incorrect. The correct definition for each pin
should be one group with three functions: "pwm", "led" and "gpio".
Change the "pwmN" groups to support "led" function.
Remove "ledN_od" groups. This cannot break backwards compatibility with
older device trees: no device tree uses it since there is no PWM driver
for this SOC yet. Also "ledN_od" groups are not even documented.
Fixes: b835d6953009 ("pinctrl: armada-37xx: swap polarity on LED group")
Signed-off-by: Marek Behún <kabel@...nel.org>
Acked-by: Rob Herring <robh@...nel.org>
Link: https://lore.kernel.org/r/20210719112938.27594-1-kabel@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 8 ++--
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 17 ++++------
2 files changed, 12 insertions(+), 13 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -43,19 +43,19 @@ group emmc_nb
group pwm0
- pin 11 (GPIO1-11)
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm1
- pin 12
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm2
- pin 13
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pwm3
- pin 14
- - functions pwm, gpio
+ - functions pwm, led, gpio
group pmic1
- pin 7
--- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c
@@ -166,10 +166,14 @@ static struct armada_37xx_pin_group arma
PIN_GRP_GPIO("jtag", 20, 5, BIT(0), "jtag"),
PIN_GRP_GPIO("sdio0", 8, 3, BIT(1), "sdio"),
PIN_GRP_GPIO("emmc_nb", 27, 9, BIT(2), "emmc"),
- PIN_GRP_GPIO("pwm0", 11, 1, BIT(3), "pwm"),
- PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"),
- PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"),
- PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"),
+ PIN_GRP_GPIO_3("pwm0", 11, 1, BIT(3) | BIT(20), 0, BIT(20), BIT(3),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm1", 12, 1, BIT(4) | BIT(21), 0, BIT(21), BIT(4),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm2", 13, 1, BIT(5) | BIT(22), 0, BIT(22), BIT(5),
+ "pwm", "led"),
+ PIN_GRP_GPIO_3("pwm3", 14, 1, BIT(6) | BIT(23), 0, BIT(23), BIT(6),
+ "pwm", "led"),
PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"),
PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"),
PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"),
@@ -183,11 +187,6 @@ static struct armada_37xx_pin_group arma
PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19),
BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19),
18, 2, "gpio", "uart"),
- PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"),
- PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"),
- PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"),
- PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"),
-
};
static struct armada_37xx_pin_group armada_37xx_sb_groups[] = {
Powered by blists - more mailing lists