| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211129181704.588196421@linuxfoundation.org>
Date: Mon, 29 Nov 2021 19:18:10 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Pali Rohár <pali@...nel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Marek Behún <kabel@...nel.org>
Subject: [PATCH 4.19 28/69] PCI: aardvark: Configure PCIe resources from ranges DT property
From: Pali Rohár <pali@...nel.org>
commit 64f160e19e9264a7f6d89c516baae1473b6f8359 upstream.
In commit 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window
configuration") was removed aardvark PCIe outbound window configuration and
commit description said that was recommended solution by HW designers.
But that commit completely removed support for configuring PCIe IO
resources without removing PCIe IO 'ranges' from DTS files. After that
commit PCIe IO space started to be treated as PCIe MEM space and accessing
it just caused kernel crash.
Moreover implementation of PCIe outbound windows prior that commit was
incorrect. It completely ignored offset between CPU address and PCIe bus
address and expected that in DTS is CPU address always same as PCIe bus
address without doing any checks. Also it completely ignored size of every
PCIe resource specified in 'ranges' DTS property and expected that every
PCIe resource has size 128 MB (also for PCIe IO range). Again without any
check. Apparently none of PCIe resource has in DTS specified size of 128
MB. So it was completely broken and thanks to how aardvark mask works,
configuration was completely ignored.
This patch reverts back support for PCIe outbound window configuration but
implementation is a new without issues mentioned above. PCIe outbound
window is required when DTS specify in 'ranges' property non-zero offset
between CPU and PCIe address space. To address recommendation by HW
designers as specified in commit description of 6df6ba974a55, set default
outbound parameters as PCIe MEM access without translation and therefore
for this PCIe 'ranges' it is not needed to configure PCIe outbound window.
For PCIe IO space is needed to configure aardvark PCIe outbound window.
This patch fixes kernel crash when trying to access PCIe IO space.
Link: https://lore.kernel.org/r/20210624215546.4015-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@...nel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc: stable@...r.kernel.org # 6df6ba974a55 ("PCI: aardvark: Remove PCIe outbound window configuration")
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/pci/controller/pci-aardvark.c | 190 +++++++++++++++++++++++++++++++++-
1 file changed, 189 insertions(+), 1 deletion(-)
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -106,6 +106,46 @@
#define PCIE_MSI_PAYLOAD_REG (CONTROL_BASE_ADDR + 0x9C)
#define PCIE_MSI_DATA_MASK GENMASK(15, 0)
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR 0x4c00
+#define OB_WIN_BLOCK_SIZE 0x20
+#define OB_WIN_COUNT 8
+#define OB_WIN_REG_ADDR(win, offset) (OB_WIN_BASE_ADDR + \
+ OB_WIN_BLOCK_SIZE * (win) + \
+ (offset))
+#define OB_WIN_MATCH_LS(win) OB_WIN_REG_ADDR(win, 0x00)
+#define OB_WIN_ENABLE BIT(0)
+#define OB_WIN_MATCH_MS(win) OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win) OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win) OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win) OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win) OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win) OB_WIN_REG_ADDR(win, 0x18)
+#define OB_WIN_DEFAULT_ACTIONS (OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
+#define OB_WIN_FUNC_NUM_MASK GENMASK(31, 24)
+#define OB_WIN_FUNC_NUM_SHIFT 24
+#define OB_WIN_FUNC_NUM_ENABLE BIT(23)
+#define OB_WIN_BUS_NUM_BITS_MASK GENMASK(22, 20)
+#define OB_WIN_BUS_NUM_BITS_SHIFT 20
+#define OB_WIN_MSG_CODE_ENABLE BIT(22)
+#define OB_WIN_MSG_CODE_MASK GENMASK(21, 14)
+#define OB_WIN_MSG_CODE_SHIFT 14
+#define OB_WIN_MSG_PAYLOAD_LEN BIT(12)
+#define OB_WIN_ATTR_ENABLE BIT(11)
+#define OB_WIN_ATTR_TC_MASK GENMASK(10, 8)
+#define OB_WIN_ATTR_TC_SHIFT 8
+#define OB_WIN_ATTR_RELAXED BIT(7)
+#define OB_WIN_ATTR_NOSNOOP BIT(6)
+#define OB_WIN_ATTR_POISON BIT(5)
+#define OB_WIN_ATTR_IDO BIT(4)
+#define OB_WIN_TYPE_MASK GENMASK(3, 0)
+#define OB_WIN_TYPE_SHIFT 0
+#define OB_WIN_TYPE_MEM 0x0
+#define OB_WIN_TYPE_IO 0x4
+#define OB_WIN_TYPE_CONFIG_TYPE0 0x8
+#define OB_WIN_TYPE_CONFIG_TYPE1 0x9
+#define OB_WIN_TYPE_MSG 0xc
+
/* LMI registers base address and register offsets */
#define LMI_BASE_ADDR 0x6000
#define CFG_REG (LMI_BASE_ADDR + 0x0)
@@ -174,6 +214,13 @@ struct advk_pcie {
struct platform_device *pdev;
void __iomem *base;
struct list_head resources;
+ struct {
+ phys_addr_t match;
+ phys_addr_t remap;
+ phys_addr_t mask;
+ u32 actions;
+ } wins[OB_WIN_COUNT];
+ u8 wins_count;
struct irq_domain *irq_domain;
struct irq_chip irq_chip;
raw_spinlock_t irq_lock;
@@ -349,9 +396,39 @@ err:
dev_err(dev, "link never came up\n");
}
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
+ phys_addr_t match, phys_addr_t remap,
+ phys_addr_t mask, u32 actions)
+{
+ advk_writel(pcie, OB_WIN_ENABLE |
+ lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
+}
+
+static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
+{
+ advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
+ advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
+ advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
+}
+
static void advk_pcie_setup_hw(struct advk_pcie *pcie)
{
u32 reg;
+ int i;
/* Set to Direct mode */
reg = advk_readl(pcie, CTRL_CONFIG_REG);
@@ -415,15 +492,51 @@ static void advk_pcie_setup_hw(struct ad
reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
+ /*
+ * Enable AXI address window location generation:
+ * When it is enabled, the default outbound window
+ * configurations (Default User Field: 0xD0074CFC)
+ * are used to transparent address translation for
+ * the outbound transactions. Thus, PCIe address
+ * windows are not required for transparent memory
+ * access when default outbound window configuration
+ * is set for memory access.
+ */
reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
- /* Bypass the address window mapping for PIO */
+ /*
+ * Set memory access in Default User Field so it
+ * is not required to configure PCIe address for
+ * transparent memory access.
+ */
+ advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
+
+ /*
+ * Bypass the address window mapping for PIO:
+ * Since PIO access already contains all required
+ * info over AXI interface by PIO registers, the
+ * address window is not required.
+ */
reg = advk_readl(pcie, PIO_CTRL);
reg |= PIO_CTRL_ADDR_WIN_DISABLE;
advk_writel(pcie, reg, PIO_CTRL);
+ /*
+ * Configure PCIe address windows for non-memory or
+ * non-transparent access as by default PCIe uses
+ * transparent memory access.
+ */
+ for (i = 0; i < pcie->wins_count; i++)
+ advk_pcie_set_ob_win(pcie, i,
+ pcie->wins[i].match, pcie->wins[i].remap,
+ pcie->wins[i].mask, pcie->wins[i].actions);
+
+ /* Disable remaining PCIe outbound windows */
+ for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
+ advk_pcie_disable_ob_win(pcie, i);
+
advk_pcie_train_link(pcie);
reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
@@ -1038,6 +1151,7 @@ static int advk_pcie_probe(struct platfo
struct advk_pcie *pcie;
struct resource *res;
struct pci_host_bridge *bridge;
+ struct resource_entry *entry;
int ret, irq;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
@@ -1067,6 +1181,80 @@ static int advk_pcie_probe(struct platfo
return ret;
}
+ resource_list_for_each_entry(entry, &pcie->resources) {
+ resource_size_t start = entry->res->start;
+ resource_size_t size = resource_size(entry->res);
+ unsigned long type = resource_type(entry->res);
+ u64 win_size;
+
+ /*
+ * Aardvark hardware allows to configure also PCIe window
+ * for config type 0 and type 1 mapping, but driver uses
+ * only PIO for issuing configuration transfers which does
+ * not use PCIe window configuration.
+ */
+ if (type != IORESOURCE_MEM && type != IORESOURCE_MEM_64 &&
+ type != IORESOURCE_IO)
+ continue;
+
+ /*
+ * Skip transparent memory resources. Default outbound access
+ * configuration is set to transparent memory access so it
+ * does not need window configuration.
+ */
+ if ((type == IORESOURCE_MEM || type == IORESOURCE_MEM_64) &&
+ entry->offset == 0)
+ continue;
+
+ /*
+ * The n-th PCIe window is configured by tuple (match, remap, mask)
+ * and an access to address A uses this window if A matches the
+ * match with given mask.
+ * So every PCIe window size must be a power of two and every start
+ * address must be aligned to window size. Minimal size is 64 KiB
+ * because lower 16 bits of mask must be zero. Remapped address
+ * may have set only bits from the mask.
+ */
+ while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
+ /* Calculate the largest aligned window size */
+ win_size = (1ULL << (fls64(size)-1)) |
+ (start ? (1ULL << __ffs64(start)) : 0);
+ win_size = 1ULL << __ffs64(win_size);
+ if (win_size < 0x10000)
+ break;
+
+ dev_dbg(dev,
+ "Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
+ pcie->wins_count, (unsigned long long)start,
+ (unsigned long long)start + win_size, type);
+
+ if (type == IORESOURCE_IO) {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
+ pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
+ } else {
+ pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
+ pcie->wins[pcie->wins_count].match = start;
+ }
+ pcie->wins[pcie->wins_count].remap = start - entry->offset;
+ pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
+
+ if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
+ break;
+
+ start += win_size;
+ size -= win_size;
+ pcie->wins_count++;
+ }
+
+ if (size > 0) {
+ dev_err(&pcie->pdev->dev,
+ "Invalid PCIe region [0x%llx-0x%llx]\n",
+ (unsigned long long)entry->res->start,
+ (unsigned long long)entry->res->end + 1);
+ return -EINVAL;
+ }
+ }
+
pcie->reset_gpio = devm_gpiod_get_from_of_node(dev, dev->of_node,
"reset-gpios", 0,
GPIOD_OUT_LOW,
Powered by blists - more mailing lists