linux-kernel - [PATCH 5.4 41/92] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211129181708.797537178@linuxfoundation.org>
Date:   Mon, 29 Nov 2021 19:18:10 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Pali Rohár <pali@...nel.org>,
        Marek Behún <kabel@...nel.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Subject: [PATCH 5.4 41/92] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge

From: Pali Rohár <pali@...nel.org>

commit 84e1b4045dc887b78bdc87d92927093dc3a465aa upstream.

Aardvark controller has something like config space of a Root Port
available at offset 0x0 of internal registers - these registers are used
for implementation of the emulated bridge.

The default value of Class Code of this bridge corresponds to a RAID Mass
storage controller, though. (This is probably intended for when the
controller is used as Endpoint.)

Change the Class Code to correspond to a PCI Bridge.

Add comment explaining this change.

Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@...nel.org>
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@....com>
Cc: stable@...r.kernel.org
Signed-off-by: Marek Behún <kabel@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/pci/controller/pci-aardvark.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -502,6 +502,26 @@ static void advk_pcie_setup_hw(struct ad
 	reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
 	advk_writel(pcie, reg, VENDOR_ID_REG);
 
+	/*
+	 * Change Class Code of PCI Bridge device to PCI Bridge (0x600400),
+	 * because the default value is Mass storage controller (0x010400).
+	 *
+	 * Note that this Aardvark PCI Bridge does not have compliant Type 1
+	 * Configuration Space and it even cannot be accessed via Aardvark's
+	 * PCI config space access method. Something like config space is
+	 * available in internal Aardvark registers starting at offset 0x0
+	 * and is reported as Type 0. In range 0x10 - 0x34 it has totally
+	 * different registers.
+	 *
+	 * Therefore driver uses emulation of PCI Bridge which emulates
+	 * access to configuration space via internal Aardvark registers or
+	 * emulated configuration buffer.
+	 */
+	reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG);
+	reg &= ~0xffffff00;
+	reg |= (PCI_CLASS_BRIDGE_PCI << 8) << 8;
+	advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG);
+
 	/* Disable Root Bridge I/O space, memory space and bus mastering */
 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
 	reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);