| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211130055541.2789-2-srinivas.neeli@xilinx.com>
Date: Tue, 30 Nov 2021 11:25:41 +0530
From: Srinivas Neeli <srinivas.neeli@...inx.com>
To: <a.zummo@...ertech.it>, <alexandre.belloni@...tlin.com>,
<michal.simek@...inx.com>, <sgoud@...inx.com>,
<shubhraj@...inx.com>, <radheys@...inx.com>
CC: <linux-rtc@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <git@...inx.com>,
Srinivas Neeli <srinivas.neeli@...inx.com>
Subject: [PATCH V3 2/2] rtc: zynqmp: Add calibration set and get support
Zynqmp RTC controller has a calibration feature to compensate
time deviation due to input clock inaccuracy.
Set and get calibration API's are used for setting and getting
calibration value from the controller calibration register.
Signed-off-by: Srinivas Neeli <srinivas.neeli@...inx.com>
---
Changes in V3:
-Calculated tick_mult using crystal frequency.
-Calibration register updating based on crystal frequency in probe.
-Supressed MIN an MAX calibration values,Will send separate patch in future.
Changes in V2:
-Removed unused macro.
-Updated code with review comments.
---
drivers/rtc/rtc-zynqmp.c | 104 +++++++++++++++++++++++++++++++--------
1 file changed, 84 insertions(+), 20 deletions(-)
diff --git a/drivers/rtc/rtc-zynqmp.c b/drivers/rtc/rtc-zynqmp.c
index f440bb52be92..eb6ee55ca725 100644
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@@ -6,6 +6,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -36,17 +37,21 @@
#define RTC_OSC_EN BIT(24)
#define RTC_BATT_EN BIT(31)
-#define RTC_CALIB_DEF 0x198233
+#define RTC_CALIB_DEF 0x8000
#define RTC_CALIB_MASK 0x1FFFFF
#define RTC_ALRM_MASK BIT(1)
#define RTC_MSEC 1000
+#define RTC_FR_MASK 0xF0000
+#define RTC_FR_MAX_TICKS 16
+#define RTC_PPB 1000000000LL
struct xlnx_rtc_dev {
struct rtc_device *rtc;
void __iomem *reg_base;
int alarm_irq;
int sec_irq;
- unsigned int calibval;
+ struct clk *rtc_clk;
+ unsigned int freq;
};
static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
@@ -61,13 +66,6 @@ static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
*/
new_time = rtc_tm_to_time64(tm) + 1;
- /*
- * Writing into calibration register will clear the Tick Counter and
- * force the next second to be signaled exactly in 1 second period
- */
- xrtcdev->calibval &= RTC_CALIB_MASK;
- writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
-
writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);
/*
@@ -173,15 +171,71 @@ static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
rtc_ctrl |= RTC_BATT_EN;
writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
+}
- /*
- * Based on crystal freq of 33.330 KHz
- * set the seconds counter and enable, set fractions counter
- * to default value suggested as per design spec
- * to correct RTC delay in frequency over period of time.
+static int xlnx_rtc_read_offset(struct device *dev, long *offset)
+{
+ struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+ long offset_val = 0;
+ unsigned int tick_mult = RTC_PPB / xrtcdev->freq;
+ unsigned int calibval;
+
+ calibval = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+ /* Offset with seconds ticks */
+ offset_val = calibval & RTC_TICK_MASK;
+ offset_val = offset_val - RTC_CALIB_DEF;
+ offset_val = offset_val * tick_mult;
+
+ /* Offset with fractional ticks */
+ if (calibval & RTC_FR_EN)
+ offset_val += ((calibval & RTC_FR_MASK) >> RTC_FR_DATSHIFT)
+ * (tick_mult / RTC_FR_MAX_TICKS);
+ *offset = offset_val;
+
+ return 0;
+}
+
+static int xlnx_rtc_set_offset(struct device *dev, long offset)
+{
+ struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+ short int max_tick;
+ unsigned char fract_tick = 0;
+ unsigned int calibval;
+ int fract_offset;
+ unsigned int tick_mult = RTC_PPB / xrtcdev->freq;
+
+ /* Number ticks for given offset */
+ max_tick = div_s64_rem(offset, tick_mult, &fract_offset);
+
+ /* Number fractional ticks for given offset */
+ if (fract_offset) {
+ if (fract_offset < 0) {
+ fract_offset = fract_offset + tick_mult;
+ max_tick--;
+ }
+ if (fract_offset > (tick_mult / RTC_FR_MAX_TICKS)) {
+ for (fract_tick = 1; fract_tick < 16; fract_tick++) {
+ if (fract_offset <=
+ (fract_tick *
+ (tick_mult / RTC_FR_MAX_TICKS)))
+ break;
+ }
+ }
+ }
+
+ /* Zynqmp RTC uses second and fractional tick
+ * counters for compensation
*/
- xrtcdev->calibval &= RTC_CALIB_MASK;
- writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+ calibval = max_tick + RTC_CALIB_DEF;
+
+ if (fract_tick)
+ calibval |= RTC_FR_EN;
+
+ calibval |= (fract_tick << RTC_FR_DATSHIFT);
+
+ writel(calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+
+ return 0;
}
static const struct rtc_class_ops xlnx_rtc_ops = {
@@ -190,6 +244,8 @@ static const struct rtc_class_ops xlnx_rtc_ops = {
.read_alarm = xlnx_rtc_read_alarm,
.set_alarm = xlnx_rtc_set_alarm,
.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
+ .read_offset = xlnx_rtc_read_offset,
+ .set_offset = xlnx_rtc_set_offset,
};
static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
@@ -255,10 +311,18 @@ static int xlnx_rtc_probe(struct platform_device *pdev)
return ret;
}
- ret = of_property_read_u32(pdev->dev.of_node, "calibration",
- &xrtcdev->calibval);
- if (ret)
- xrtcdev->calibval = RTC_CALIB_DEF;
+ /* Getting the rtc_clk info */
+ xrtcdev->rtc_clk = devm_clk_get_optional(&pdev->dev, "rtc_clk");
+ if (IS_ERR(xrtcdev->rtc_clk)) {
+ if (PTR_ERR(xrtcdev->rtc_clk) != -EPROBE_DEFER)
+ dev_warn(&pdev->dev, "Device clock not found.\n");
+ }
+ xrtcdev->freq = clk_get_rate(xrtcdev->rtc_clk);
+ if (!xrtcdev->freq)
+ xrtcdev->freq = RTC_CALIB_DEF;
+ ret = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+ if (!ret)
+ writel(xrtcdev->freq, (xrtcdev->reg_base + RTC_CALIB_WR));
xlnx_init_rtc(xrtcdev);
--
2.17.1
Powered by blists - more mailing lists