| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <cbe2a78bbdb26a7867fd49aeb50ee95aa33e170c.1638381245.git.reinette.chatre@intel.com>
Date: Wed, 1 Dec 2021 11:23:19 -0800
From: Reinette Chatre <reinette.chatre@...el.com>
To: dave.hansen@...ux.intel.com, jarkko@...nel.org, tglx@...utronix.de,
bp@...en8.de, luto@...nel.org, mingo@...hat.com,
linux-sgx@...r.kernel.org, x86@...nel.org
Cc: seanjc@...gle.com, kai.huang@...el.com, cathy.zhang@...el.com,
cedric.xing@...el.com, haitao.huang@...el.com,
mark.shanahan@...el.com, hpa@...or.com,
linux-kernel@...r.kernel.org
Subject: [PATCH 21/25] selftests/sgx: Test faulty enclave behavior
Removing a page from an initialized enclave involves three steps:
first the user requests changing the page type to SGX_PAGE_TYPE_TRIM
via an ioctl, on success the ENCLU[EACCEPT] instruction needs to be run
from within the enclave to accept the page removal, finally the
user requests page removal to be completed via an ioctl. Only after
acceptance (ENCLU[EACCEPT]) from within the enclave can the kernel
remove the page from a running enclave.
Test the behavior when the user's request to change the page type
succeeds, but the ENCLU[EACCEPT] instruction is not run before the
ioctl requesting page removal is run. This should not be permitted.
Signed-off-by: Reinette Chatre <reinette.chatre@...el.com>
---
tools/testing/selftests/sgx/main.c | 114 +++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index d73ea2a02d4b..f71f943099fb 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -1492,4 +1492,118 @@ TEST_F(enclave, tcs_create)
munmap(addr, 3 * PAGE_SIZE);
}
+/*
+ * Ensure sane behavior if user requests page removal, does not run
+ * EACCEPT from within enclave but still attempts to finalize page removal
+ * with the SGX_IOC_PAGE_REMOVE ioctl. The latter should fail because the
+ * removal was not EACCEPTed from within the enclave.
+ */
+TEST_F(enclave, remove_added_page_no_eaccept)
+{
+ struct encl_op_get_from_addr get_addr_op;
+ struct encl_op_put_to_addr put_addr_op;
+ struct sgx_page_remove remove_ioc;
+ struct sgx_page_modt modt_ioc;
+ unsigned long data_start;
+ int ret, errno_save;
+
+ ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata));
+
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ /*
+ * Hardware (SGX2) and OS support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &modt_ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return, "Kernel does not support test SGX_IOC_PAGE_MODT ioctl");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /*
+ * Page that will be removed is the second data page in the .data
+ * segment. This forms part of the local encl_buffer within the
+ * enclave.
+ */
+ data_start = self->encl.encl_base +
+ encl_get_data_offset(&self->encl) + PAGE_SIZE;
+
+ /*
+ * Sanity check that page at @data_start is writable before
+ * removing it.
+ *
+ * Start by writing MAGIC to test page.
+ */
+ put_addr_op.value = MAGIC;
+ put_addr_op.addr = data_start;
+ put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /*
+ * Read memory that was just written to, confirming that data
+ * previously written (MAGIC) is present. Only change two test
+ * parameters, rest are same as previous test.
+ */
+ get_addr_op.value = 0;
+ get_addr_op.addr = data_start;
+ get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ EXPECT_EQ(get_addr_op.value, MAGIC);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /* Start page removal by requesting change of page type to PT_TRIM */
+ memset(&modt_ioc, 0, sizeof(modt_ioc));
+
+ modt_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ modt_ioc.length = PAGE_SIZE;
+ modt_ioc.type = SGX_PAGE_TYPE_TRIM;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &modt_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(modt_ioc.result, 0);
+ EXPECT_EQ(modt_ioc.count, 4096);
+
+ /* Skip EACCEPT */
+
+ /* Send final ioctl to complete page removal */
+ memset(&remove_ioc, 0, sizeof(remove_ioc));
+
+ remove_ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ remove_ioc.length = PAGE_SIZE;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_REMOVE, &remove_ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ /* Operation not permitted since EACCEPT was omitted. */
+ EXPECT_EQ(ret, -1);
+ EXPECT_EQ(errno_save, EPERM);
+ EXPECT_EQ(remove_ioc.count, 0);
+}
+
TEST_HARNESS_MAIN
--
2.25.1
Powered by blists - more mailing lists