[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211202055724.4416-2-i.bornyakov@metrotek.ru>
Date: Thu, 2 Dec 2021 08:57:23 +0300
From: Ivan Bornyakov <i.bornyakov@...rotek.ru>
To: unlisted-recipients:; (no To-header on input)
Cc: Ivan Bornyakov <i.bornyakov@...rotek.ru>, system@...rotek.ru,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, devicetree@...r.kernel.org
Subject: [PATCH v3 1/2] bus: imx-weim: optionally enable continuous burst clock
To enable continuous burst clock, add "fsl,continuous-burst-clk" along
with "fsl,burst-clk-enable" property to the weim bus's devicetree node.
Example:
weim: weim@...8000 {
compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
reg = <0x021b8000 0x4000>;
clocks = <&clks 143>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x50000000 0x08000000>;
fsl,weim-cs-gpr = <&gpr>;
fsl,burst-clk-enable;
fsl,continuous-burst-clk;
client-device@0 {
...
};
};
Signed-off-by: Ivan Bornyakov <i.bornyakov@...rotek.ru>
---
drivers/bus/imx-weim.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c
index 28bb65a5613f..bccb275b65ba 100644
--- a/drivers/bus/imx-weim.c
+++ b/drivers/bus/imx-weim.c
@@ -21,6 +21,7 @@ struct imx_weim_devtype {
unsigned int cs_stride;
unsigned int wcr_offset;
unsigned int wcr_bcm;
+ unsigned int wcr_cont_bclk;
};
static const struct imx_weim_devtype imx1_weim_devtype = {
@@ -41,6 +42,7 @@ static const struct imx_weim_devtype imx50_weim_devtype = {
.cs_stride = 0x18,
.wcr_offset = 0x90,
.wcr_bcm = BIT(0),
+ .wcr_cont_bclk = BIT(3),
};
static const struct imx_weim_devtype imx51_weim_devtype = {
@@ -206,8 +208,20 @@ static int weim_parse_dt(struct platform_device *pdev, void __iomem *base)
if (of_property_read_bool(pdev->dev.of_node, "fsl,burst-clk-enable")) {
if (devtype->wcr_bcm) {
reg = readl(base + devtype->wcr_offset);
- writel(reg | devtype->wcr_bcm,
- base + devtype->wcr_offset);
+ reg |= devtype->wcr_bcm;
+
+ if (of_property_read_bool(pdev->dev.of_node,
+ "fsl,continuous-burst-clk")) {
+ if (devtype->wcr_cont_bclk) {
+ reg |= devtype->wcr_cont_bclk;
+ } else {
+ dev_err(&pdev->dev,
+ "continuous burst clk not supported.\n");
+ return -EINVAL;
+ }
+ }
+
+ writel(reg, base + devtype->wcr_offset);
} else {
dev_err(&pdev->dev, "burst clk mode not supported.\n");
return -EINVAL;
--
2.32.0
Powered by blists - more mailing lists