linux-kernel - Re: [PATCH] arm64: dts: ti: k3-am64-main: add timesync router node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 2 Dec 2021 16:14:23 +0530
From:   Vignesh Raghavendra <vigneshr@...com>
To:     Christian Gmeiner <christian.gmeiner@...il.com>,
        <linux-kernel@...r.kernel.org>
CC:     Grygorii Strashko <grygorii.strashko@...com>,
        Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-am64-main: add timesync router node

Hi,

On 11/9/21 8:31 PM, Christian Gmeiner wrote:
> The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
> multiplexers to provide selection of active CPTS time sync events for
> routing to CPTS capable modules.
> 
> This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
> 
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
> Signed-off-by: Christian Gmeiner <christian.gmeiner@...il.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 42d1d219a3fd..c9321a80353a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -564,6 +564,14 @@ cpts@...00000 {
>  		ti,cpts-ext-ts-inputs = <8>;
>  	};
>  
> +	timesync_router: timesync-router@...000 {

Node with "pinctrl-single" would need to be named pinctrl@....
Else this would probably fail dtbs_check once pinctrl-single bindings is
converted to YAML format.

> +		compatible = "pinctrl-single";
> +		reg = <0x0 0xa40000 0x0 0x800>;
> +		#pinctrl-cells = <1>;
> +		pinctrl-single,register-width = <32>;
> +		pinctrl-single,function-mask = <0x000107ff>;
> +	};
> +
>  	usbss0: cdns-usb@...0000{
>  		compatible = "ti,am64-usb";
>  		reg = <0x00 0xf900000 0x00 0x100>;
> 

Regards
Vignesh