[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <7c686adc-4288-f29a-c82a-5decab8db703@quicinc.com>
Date: Fri, 3 Dec 2021 14:53:59 -0800
From: Kuogee Hsieh <quic_khsieh@...cinc.com>
To: Stephen Boyd <swboyd@...omium.org>, <agross@...nel.org>,
<airlied@...ux.ie>, <bjorn.andersson@...aro.org>,
<daniel@...ll.ch>, <dmitry.baryshkov@...aro.org>,
<robdclark@...il.com>, <sean@...rly.run>, <vkoul@...nel.org>
CC: <quic_abhinavk@...cinc.com>, <aravindh@...eaurora.org>,
<freedreno@...ts.freedesktop.org>,
<dri-devel@...ts.freedesktop.org>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Kuogee Hsieh <khsieh@...eaurora.org>
Subject: Re: [PATCH v4] drm/msm/dp: do not initialize phy until plugin
interrupt received
On 12/2/2021 6:41 PM, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-11-09 13:38:13)
>> From: Kuogee Hsieh <khsieh@...eaurora.org>
>>
>> Current DP drivers have regulators, clocks, irq and phy are grouped
>> together within a function and executed not in a symmetric manner.
>> This increase difficulty of code maintenance and limited code scalability.
>> This patch divided the driver life cycle of operation into four states,
>> resume (including booting up), dongle plugin, dongle unplugged and suspend.
>> Regulators, core clocks and irq are grouped together and enabled at resume
>> (or booting up) so that the DP controller is armed and ready to receive HPD
>> plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
>> into DUT (device under test). Once HPD plugin interrupt is received, DP
>> controller will initialize phy so that dpcd read/write will function and
>> following link training can be proceeded successfully. DP phy will be
>> disabled after main link is teared down at end of unplugged HPD interrupt
>> handle triggered by dongle unplugged out of DUT. Finally regulators, code
>> clocks and irq are disabled at corresponding suspension.
>>
>> Changes in V2:
>> -- removed unnecessary dp_ctrl NULL check
>> -- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs
>> -- remove flip parameter out of dp_ctrl_irq_enable()
>> -- add fixes tag
>>
>> Changes in V3:
>> -- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
>> dp_display_host_init() for eDP
>>
>> Changes in V4:
>> -- rewording commit text to match this commit changes
>>
>> Fixes: e91e3065a806 ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
>>
>> Signed-off-by: Kuogee Hsieh <quic_khsieh@...cinc.com>
>> ---
> Can you please resend this based on the msm-next branch[1]? It doesn't
> apply now that other patches have been applied.
>
> [1] https://gitlab.freedesktop.org/drm/msm.git msm-next
Stephen, below patches missed at msm-next branch. Are there merged soon?
1) WIP: drm/msm/dp: Detect the connector type based on reg property
2) WIP: handle no-hpd property in DP driver
>> drivers/gpu/drm/msm/dp/dp_ctrl.c | 87 ++++++++++++++++---------------------
>> drivers/gpu/drm/msm/dp/dp_ctrl.h | 9 ++--
>> drivers/gpu/drm/msm/dp/dp_display.c | 83 ++++++++++++++++++++++++++---------
>> 3 files changed, 105 insertions(+), 74 deletions(-)
>>
Powered by blists - more mailing lists