[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0f641180-d369-6536-1e48-30c1ce5fba6d@ti.com>
Date: Fri, 3 Dec 2021 19:03:24 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Christian Gmeiner <christian.gmeiner@...il.com>,
<linux-kernel@...r.kernel.org>
CC: Grygorii Strashko <grygorii.strashko@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ti: k3-am64-main: add timesync router node
On 02/12/21 11:00 pm, Christian Gmeiner wrote:
> The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
> multiplexers to provide selection of active CPTS time sync events for
> routing to CPTS capable modules.
>
> This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@...com>
> Signed-off-by: Christian Gmeiner <christian.gmeiner@...il.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@...com>
> ---
> Changes in v2:
> - Use pinctrl for node name
>
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index 5ad638b95ffc..e16d2ccdd818 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -564,6 +564,14 @@ cpts@...00000 {
> ti,cpts-ext-ts-inputs = <8>;
> };
>
> + timesync_router: pinctrl@...000 {
> + compatible = "pinctrl-single";
> + reg = <0x0 0xa40000 0x0 0x800>;
> + #pinctrl-cells = <1>;
> + pinctrl-single,register-width = <32>;
> + pinctrl-single,function-mask = <0x000107ff>;
> + };
> +
> usbss0: cdns-usb@...0000{
> compatible = "ti,am64-usb";
> reg = <0x00 0xf900000 0x00 0x100>;
>
Powered by blists - more mailing lists