| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Ya4uETXlJc7PMY81@errol.ini.cmu.edu>
Date: Mon, 6 Dec 2021 10:36:49 -0500
From: "Gabriel L. Somlo" <gsomlo@...il.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, Ulf Hansson <ulf.hansson@...aro.org>,
Linux MMC List <linux-mmc@...r.kernel.org>,
Karol Gugala <kgugala@...micro.com>,
Mateusz Holenko <mholenko@...micro.com>,
Kamil Rakoczy <krakoczy@...micro.com>,
mdudek@...ernships.antmicro.com, paulus@...abs.org,
Joel Stanley <joel@....id.au>,
Stafford Horne <shorne@...il.com>,
david.abdurachmanov@...ive.com, florent@...oy-digital.fr,
Randy Dunlap <rdunlap@...radead.org>
Subject: Re: [PATCH v2 2/3] dt-bindings: mmc: Add bindings for LiteSDCard
Hi Geert,
On Mon, Dec 06, 2021 at 11:18:18AM +0100, Geert Uytterhoeven wrote:
> On Sat, Dec 4, 2021 at 9:41 PM Gabriel Somlo <gsomlo@...il.com> wrote:
> > LiteSDCard is a small footprint, configurable SDCard core for FPGA
> > based system on chips.
> >
> > Signed-off-by: Gabriel Somlo <gsomlo@...il.com>
>
> And after reviewing the driver...
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
> > @@ -0,0 +1,63 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: LiteX LiteSDCard device
> > +
> > +maintainers:
> > + - Gabriel Somlo <gsomlo@...il.com>
> > +
> > +description: |
> > + LiteSDCard is a small footprint, configurable SDCard core for FPGA based
> > + system on chips.
> > +
> > + The hardware source is Open Source and can be found on at
> > + https://github.com/enjoy-digital/litesdcard/.
> > +
> > +allOf:
> > + - $ref: mmc-controller.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: litex,mmc
> > +
> > + reg:
> > + items:
> > + - description: PHY registers
> > + - description: CORE registers
> > + - description: DMA Reader buffer
> > + - description: DMA Writer buffer
> > + - description: IRQ registers
>
> The last one is optional...
>
> > +
> > + reg-names:
> > + items:
> > + - const: phy
> > + - const: core
> > + - const: reader
> > + - const: writer
> > + - const: irq
>
> Likewise.
>
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
>
> reg-names, as the driver needs it (and it's good practice anyway).
>
> > + - interrupts
>
> Interrupts is optional.
>
> I tried to link it to reg{,-names}:
>
> if:
> not:
> required:
> - interrupts
> then:
> properties:
> reg:
> maxItems: 4
> reg-names:
> maxItems: 4
>
> but that doesn't seem to work. Anyone with a clue?
For now I'm queueing this up for v3, unless we get more ideas:
@@ -29,7 +29,9 @@ properties:
- description: CORE registers
- description: DMA Reader buffer
- description: DMA Writer buffer
- - description: IRQ registers
+ - description: IRQ registers (optional)
+ minItems: 4
+ maxItems: 5
reg-names:
items:
@@ -37,7 +39,9 @@ properties:
- const: core
- const: reader
- const: writer
- - const: irq
+ - const: irq (optional)
+ minItems: 4
+ maxItems: 5
interrupts:
maxItems: 1
@@ -45,7 +49,7 @@ properties:
required:
- compatible
- reg
- - interrupts
+ - reg-names
Some of the *.txt formatted files in Documentation/devicetree/bindings/mmc
had an explicit "Optional" section, but all the .yaml formatted ones
just seem to assume that if it's not under `required:`, it's
implicitly optional. So I'm removing `interrupts` from `required`, and
adding `reg-names`, as you pointed out.
Thanks,
--Gabriel
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + mmc: mmc@...05000 {
> > + compatible = "litex,mmc";
> > + reg = <0x12005000 0x100>,
> > + <0x12003800 0x100>,
> > + <0x12003000 0x100>,
> > + <0x12004800 0x100>,
> > + <0x12004000 0x100>;
> > + reg-names = "phy", "core", "reader", "writer", "irq";
> > + interrupts = <4>;
> > + };
> > --
> > 2.31.1
> >
>
>
> --
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Powered by blists - more mailing lists