| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211206093318.45214-2-hdegoede@redhat.com>
Date: Mon, 6 Dec 2021 10:32:59 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: "Rafael J . Wysocki" <rjw@...ysocki.net>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Mark Gross <markgross@...nel.org>,
Andy Shevchenko <andy@...radead.org>,
Wolfram Sang <wsa@...-dreams.de>,
Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Ard Biesheuvel <ardb@...nel.org>
Cc: Hans de Goede <hdegoede@...hat.com>, Len Brown <lenb@...nel.org>,
linux-acpi@...r.kernel.org, Yauhen Kharuzhy <jekhor@...il.com>,
Tsuchiya Yuto <kitakar@...il.com>,
platform-driver-x86@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-efi@...r.kernel.org
Subject: [PATCH v4 01/20] power: supply: core: Refactor power_supply_set_input_current_limit_from_supplier()
Some (USB) charger ICs have variants with USB D+ and D- pins to do their
own builtin charger-type detection, like e.g. the bq24190 and bq25890 and
also variants which lack this functionality, e.g. the bq24192 and bq25892.
In case the charger-type; and thus the input-current-limit detection is
done outside the charger IC then we need some way to communicate this to
the charger IC. In the past extcon was used for this, but if the external
detection does e.g. full USB PD negotiation then the extcon cable-types do
not convey enough information.
For these setups it was decided to model the external charging "brick"
and the parameters negotiated with it as a power_supply class-device
itself; and power_supply_set_input_current_limit_from_supplier() was
introduced to allow drivers to get the input-current-limit this way.
But in some cases psy drivers may want to know other properties, e.g. the
bq25892 can do "quick-charge" negotiation by pulsing its current draw,
but this should only be done if the usb_type psy-property of its supplier
is set to DCP (and device-properties indicate the board allows higher
voltages).
Instead of adding extra helper functions for each property which
a psy-driver wants to query from its supplier, refactor
power_supply_set_input_current_limit_from_supplier() into a
more generic power_supply_get_property_from_supplier() function.
Signed-off-by: Hans de Goede <hdegoede@...hat.com>
---
drivers/power/supply/bq24190_charger.c | 10 ++++-
drivers/power/supply/power_supply_core.c | 57 +++++++++++++-----------
include/linux/power_supply.h | 5 ++-
3 files changed, 42 insertions(+), 30 deletions(-)
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index 35ff0c8fe96f..0c3d5caaef0c 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1206,8 +1206,16 @@ static void bq24190_input_current_limit_work(struct work_struct *work)
struct bq24190_dev_info *bdi =
container_of(work, struct bq24190_dev_info,
input_current_limit_work.work);
+ union power_supply_propval val;
+ int ret;
- power_supply_set_input_current_limit_from_supplier(bdi->charger);
+ ret = power_supply_get_property_from_supplier(bdi->charger,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ &val);
+ if (ret == 0)
+ bq24190_charger_set_property(bdi->charger,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ &val);
}
/* Sync the input-current-limit with our parent supply (if we have one) */
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
index fc12a4f407f4..fb956a9a1827 100644
--- a/drivers/power/supply/power_supply_core.c
+++ b/drivers/power/supply/power_supply_core.c
@@ -375,46 +375,49 @@ int power_supply_is_system_supplied(void)
}
EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
-static int __power_supply_get_supplier_max_current(struct device *dev,
- void *data)
+struct psy_get_supplier_prop_data {
+ struct power_supply *psy;
+ enum power_supply_property psp;
+ union power_supply_propval *val;
+};
+
+static int __power_supply_get_supplier_property(struct device *dev, void *_data)
{
- union power_supply_propval ret = {0,};
struct power_supply *epsy = dev_get_drvdata(dev);
- struct power_supply *psy = data;
+ struct psy_get_supplier_prop_data *data = _data;
- if (__power_supply_is_supplied_by(epsy, psy))
- if (!epsy->desc->get_property(epsy,
- POWER_SUPPLY_PROP_CURRENT_MAX,
- &ret))
- return ret.intval;
+ if (__power_supply_is_supplied_by(epsy, data->psy))
+ if (!epsy->desc->get_property(epsy, data->psp, data->val))
+ return 1; /* Success */
- return 0;
+ return 0; /* Continue iterating */
}
-int power_supply_set_input_current_limit_from_supplier(struct power_supply *psy)
+int power_supply_get_property_from_supplier(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
{
- union power_supply_propval val = {0,};
- int curr;
-
- if (!psy->desc->set_property)
- return -EINVAL;
+ struct psy_get_supplier_prop_data data = {
+ .psy = psy,
+ .psp = psp,
+ .val = val,
+ };
+ int ret;
/*
* This function is not intended for use with a supply with multiple
- * suppliers, we simply pick the first supply to report a non 0
- * max-current.
+ * suppliers, we simply pick the first supply to report the psp.
*/
- curr = class_for_each_device(power_supply_class, NULL, psy,
- __power_supply_get_supplier_max_current);
- if (curr <= 0)
- return (curr == 0) ? -ENODEV : curr;
-
- val.intval = curr;
+ ret = class_for_each_device(power_supply_class, NULL, &data,
+ __power_supply_get_supplier_property);
+ if (ret < 0)
+ return ret;
+ if (ret == 0)
+ return -ENODEV;
- return psy->desc->set_property(psy,
- POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+ return 0;
}
-EXPORT_SYMBOL_GPL(power_supply_set_input_current_limit_from_supplier);
+EXPORT_SYMBOL_GPL(power_supply_get_property_from_supplier);
int power_supply_set_battery_charged(struct power_supply *psy)
{
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 9ca1f120a211..0735b8963e0a 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -420,8 +420,9 @@ power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table
int table_len, int temp);
extern void power_supply_changed(struct power_supply *psy);
extern int power_supply_am_i_supplied(struct power_supply *psy);
-extern int power_supply_set_input_current_limit_from_supplier(
- struct power_supply *psy);
+int power_supply_get_property_from_supplier(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val);
extern int power_supply_set_battery_charged(struct power_supply *psy);
#ifdef CONFIG_POWER_SUPPLY
--
2.33.1
Powered by blists - more mailing lists