linux-kernel - Re: [PATCH] ath10k: support bus and device specific API 1 BDF selection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87lf0wjnhf.fsf@codeaurora.org>
Date:   Tue, 07 Dec 2021 20:09:32 +0200
From:   Kalle Valo <kvalo@...nel.org>
To:     Robert Marko <robimarko@...il.com>
Cc:     davem@...emloft.net, kuba@...nel.org, ath10k@...ts.infradead.org,
        linux-wireless@...r.kernel.org, netdev@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ath10k: support bus and device specific API 1 BDF selection

Kalle Valo <kvalo@...nel.org> writes:

> Robert Marko <robimarko@...il.com> wrote:
>
>> Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the
>> BDF-s to be extracted from the device storage instead of shipping packaged
>> API 2 BDF-s.
>> 
>> This is required as MikroTik has started shipping boards that require BDF-s
>> to be updated, as otherwise their WLAN performance really suffers.
>> This is however impossible as the devices that require this are release
>> under the same revision and its not possible to differentiate them from
>> devices using the older BDF-s.
>> 
>> In OpenWrt we are extracting the calibration data during runtime and we are
>> able to extract the BDF-s in the same manner, however we cannot package the
>> BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on
>> the fly.
>> This is an issue as the ath10k driver explicitly looks only for the
>> board.bin file and not for something like board-bus-device.bin like it does
>> for pre-cal data.
>> Due to this we have no way of providing correct BDF-s on the fly, so lets
>> extend the ath10k driver to first look for BDF-s in the
>> board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin
>> If that fails, look for the default board file name as defined previously.
>> 
>> Signed-off-by: Robert Marko <robimarko@...il.com>
>
> Can someone review this, please? I understand the need for this, but the board
> handling is getting quite complex in ath10k so I'm hesitant.
>
> What about QCA6390 and other devices. Will they still work?

I meant QCA6174, of course. I have been working too much on ath11k.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches