| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211207205743.150299-21-mjrosato@linux.ibm.com>
Date: Tue, 7 Dec 2021 15:57:31 -0500
From: Matthew Rosato <mjrosato@...ux.ibm.com>
To: linux-s390@...r.kernel.org
Cc: alex.williamson@...hat.com, cohuck@...hat.com,
schnelle@...ux.ibm.com, farman@...ux.ibm.com, pmorel@...ux.ibm.com,
borntraeger@...ux.ibm.com, hca@...ux.ibm.com, gor@...ux.ibm.com,
gerald.schaefer@...ux.ibm.com, agordeev@...ux.ibm.com,
frankja@...ux.ibm.com, david@...hat.com, imbrenda@...ux.ibm.com,
vneethv@...ux.ibm.com, oberpar@...ux.ibm.com, freude@...ux.ibm.com,
thuth@...hat.com, pasic@...ux.ibm.com, kvm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 20/32] KVM: s390: pci: provide routines for enabling/disabling interpretation
These routines will be wired into the vfio_pci_zdev ioctl handlers to
respond to requests to enable / disable a device for zPCI Load/Store
interpretation.
The first time such a request is received, enable the necessary facilities
for the guest.
Signed-off-by: Matthew Rosato <mjrosato@...ux.ibm.com>
---
arch/s390/include/asm/kvm_pci.h | 4 ++
arch/s390/kvm/pci.c | 91 +++++++++++++++++++++++++++++++++
arch/s390/pci/pci.c | 3 ++
3 files changed, 98 insertions(+)
diff --git a/arch/s390/include/asm/kvm_pci.h b/arch/s390/include/asm/kvm_pci.h
index 3e491a39704c..5d6283acb54c 100644
--- a/arch/s390/include/asm/kvm_pci.h
+++ b/arch/s390/include/asm/kvm_pci.h
@@ -26,4 +26,8 @@ extern int kvm_s390_pci_dev_open(struct zpci_dev *zdev);
extern void kvm_s390_pci_dev_release(struct zpci_dev *zdev);
extern int kvm_s390_pci_attach_kvm(struct zpci_dev *zdev, struct kvm *kvm);
+extern int kvm_s390_pci_interp_probe(struct zpci_dev *zdev);
+extern int kvm_s390_pci_interp_enable(struct zpci_dev *zdev);
+extern int kvm_s390_pci_interp_disable(struct zpci_dev *zdev);
+
#endif /* ASM_KVM_PCI_H */
diff --git a/arch/s390/kvm/pci.c b/arch/s390/kvm/pci.c
index f0e5386ff943..57cbe3827ea6 100644
--- a/arch/s390/kvm/pci.c
+++ b/arch/s390/kvm/pci.c
@@ -10,7 +10,9 @@
#include <linux/kvm_host.h>
#include <linux/pci.h>
#include <asm/kvm_pci.h>
+#include <asm/sclp.h>
#include "pci.h"
+#include "kvm-s390.h"
static struct zpci_aift aift;
@@ -118,6 +120,95 @@ int kvm_s390_pci_aen_init(u8 nisc)
return rc;
}
+int kvm_s390_pci_interp_probe(struct zpci_dev *zdev)
+{
+ if (!(sclp.has_zpci_interp && test_facility(69)))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_probe);
+
+int kvm_s390_pci_interp_enable(struct zpci_dev *zdev)
+{
+ u32 gd;
+ int rc;
+
+ /*
+ * If this is the first request to use an interpreted device, make the
+ * necessary vcpu changes
+ */
+ if (!zdev->kzdev->kvm->arch.use_zpci_interp)
+ kvm_s390_vcpu_pci_enable_interp(zdev->kzdev->kvm);
+
+ /*
+ * In the event of a system reset in userspace, the GISA designation
+ * may still be assigned because the device is still enabled.
+ * Verify it's the same guest before proceeding.
+ */
+ gd = (u32)(u64)&zdev->kzdev->kvm->arch.sie_page2->gisa;
+ if (zdev->gd != 0 && zdev->gd != gd)
+ return -EPERM;
+
+ if (zdev_enabled(zdev)) {
+ zdev->gd = 0;
+ rc = zpci_disable_device(zdev);
+ if (rc)
+ return rc;
+ }
+
+ /*
+ * Store information about the identity of the kvm guest allowed to
+ * access this device via interpretation to be used by host CLP
+ */
+ zdev->gd = gd;
+
+ rc = zpci_enable_device(zdev);
+ if (rc)
+ goto err;
+
+ /* Re-register the IOMMU that was already created */
+ rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+ (u64)zdev->dma_table);
+ if (rc)
+ goto err;
+
+ return rc;
+
+err:
+ zdev->gd = 0;
+ return rc;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_enable);
+
+int kvm_s390_pci_interp_disable(struct zpci_dev *zdev)
+{
+ int rc;
+
+ if (zdev->gd == 0)
+ return -EINVAL;
+
+ /* Remove the host CLP guest designation */
+ zdev->gd = 0;
+
+ if (zdev_enabled(zdev)) {
+ rc = zpci_disable_device(zdev);
+ if (rc)
+ return rc;
+ }
+
+ rc = zpci_enable_device(zdev);
+ if (rc)
+ return rc;
+
+ /* Re-register the IOMMU that was already created */
+ rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
+ (u64)zdev->dma_table);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(kvm_s390_pci_interp_disable);
+
int kvm_s390_pci_dev_open(struct zpci_dev *zdev)
{
struct kvm_zdev *kzdev;
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 175854c861cd..0eac84387f3c 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -141,6 +141,7 @@ int zpci_register_ioat(struct zpci_dev *zdev, u8 dmaas,
zpci_dbg(3, "reg ioat fid:%x, cc:%d, status:%d\n", zdev->fid, cc, status);
return cc;
}
+EXPORT_SYMBOL_GPL(zpci_register_ioat);
/* Modify PCI: Unregister I/O address translation parameters */
int zpci_unregister_ioat(struct zpci_dev *zdev, u8 dmaas)
@@ -740,6 +741,7 @@ int zpci_enable_device(struct zpci_dev *zdev)
zpci_update_fh(zdev, fh);
return rc;
}
+EXPORT_SYMBOL_GPL(zpci_enable_device);
int zpci_disable_device(struct zpci_dev *zdev)
{
@@ -763,6 +765,7 @@ int zpci_disable_device(struct zpci_dev *zdev)
}
return rc;
}
+EXPORT_SYMBOL_GPL(zpci_disable_device);
/**
* zpci_hot_reset_device - perform a reset of the given zPCI function
--
2.27.0
Powered by blists - more mailing lists