[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211207031905.61906-3-xueshuai@linux.alibaba.com>
Date: Tue, 7 Dec 2021 11:19:05 +0800
From: Shuai Xue <xueshuai@...ux.alibaba.com>
To: mchehab@...nel.org, bp@...en8.de, tony.luck@...el.com,
james.morse@....com, rric@...nel.org, ardb@...nel.org,
linux-edac@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-efi@...r.kernel.org
Cc: xueshuai@...ux.alibaba.com, zhangliguang@...ux.alibaba.com,
zhuo.song@...ux.alibaba.com
Subject: [PATCH 2/2] ghes_edac: refactor error status fields decoding
ghes_edac_report_mem_error() in ghes_edac.c is a Long Method in which the
error status fields decoding could be refactored for reuse. On the other
hand, the cper_print_mem() only reports the error status and misses its
description.
This patch introduces a new helper function cper_mem_err_status_str() which
is used to wrap up the decoding logics, and the cper_print_mem() will call
it and report the details of error status description.
The cper error log is now properly reporting the error as follows (all
Validation Bits are enabled):
[37863.026267] EDAC MC0: 1 CE single-symbol chipkill ECC on unknown memory (node: 0 card: 0 module: 0 rank: 0 bank: 1282 bank_group: 5 bank_address: 2 device: 0 row: 11387 column: 1544 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000 DIMM location: not present. DMI handle: 0x0000 page:0x963d9b offset:0x20 grain:1 syndrome:0x0 - APEI location: node: 0 card: 0 module: 0 rank: 0 bank: 1282 bank_group: 5 bank_address: 2 device: 0 row: 11387 column: 1544 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000 DIMM location: not present. DMI handle: 0x0000 status(0x0000000000000000): reserved)
[37863.026272] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2
[37863.026273] {2}[Hardware Error]: It has been corrected by h/w and requires no further action
[37863.026275] {2}[Hardware Error]: event severity: corrected
[37863.026276] {2}[Hardware Error]: Error 0, type: corrected
[37863.026278] {2}[Hardware Error]: section_type: memory error
[37863.026279] {2}[Hardware Error]: error_status: 0x0000000000000000, reserved
[37863.026279] {2}[Hardware Error]: physical_address: 0x0000000963d9b020
[37863.026280] {2}[Hardware Error]: physical_address_mask: 0x0000000000000000
[37863.026282] {2}[Hardware Error]: node: 0 card: 0 module: 0 rank: 0 bank: 1282 bank_group: 5 bank_address: 2 device: 0 row: 11387 column: 1544 bit_position: 0 requestor_id: 0x0000000000000000 responder_id: 0x0000000000000000
[37863.026283] {2}[Hardware Error]: error_type: 4, single-symbol chipkill ECC
[37863.026284] {2}[Hardware Error]: DIMM location: not present. DMI handle: 0x0000
Signed-off-by: Shuai Xue <xueshuai@...ux.alibaba.com>
---
drivers/edac/ghes_edac.c | 89 +++++++++++--------------------------
drivers/firmware/efi/cper.c | 49 ++++++++++++++++++--
include/linux/cper.h | 5 ++-
3 files changed, 75 insertions(+), 68 deletions(-)
diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 7b25c3207c11..b74ffd82f56b 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -235,6 +235,31 @@ static void ghes_scan_system(void)
system_scanned = true;
}
+static int ghes_edac_mem_err_other_detail(const struct cper_sec_mem_err *mem,
+ char *msg, const char *location)
+{
+ u32 len, n;
+
+ if (!msg)
+ return 0;
+
+ n = 0;
+ len = 2 * CPER_REC_LEN - 1;
+
+ n += snprintf(msg + n, len - n, "APEI location: %s ", location);
+
+ if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS) {
+ u64 status = mem->error_status;
+
+ n += snprintf(msg + n, len - n, "status(0x%016llx): ",
+ (long long)status);
+ n += snprintf(msg + n, len - n, "%s ", cper_mem_err_status_str(status));
+ }
+
+ msg[n] = '\0';
+ return n;
+}
+
void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
{
struct edac_raw_error_desc *e;
@@ -336,69 +361,7 @@ void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err)
/* All other fields are mapped on e->other_detail */
p = pvt->other_detail;
- p += snprintf(p, sizeof(pvt->other_detail),
- "APEI location: %s ", e->location);
- if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) {
- u64 status = mem_err->error_status;
-
- p += sprintf(p, "status(0x%016llx): ", (long long)status);
- switch ((status >> 8) & 0xff) {
- case 1:
- p += sprintf(p, "Error detected internal to the component ");
- break;
- case 16:
- p += sprintf(p, "Error detected in the bus ");
- break;
- case 4:
- p += sprintf(p, "Storage error in DRAM memory ");
- break;
- case 5:
- p += sprintf(p, "Storage error in TLB ");
- break;
- case 6:
- p += sprintf(p, "Storage error in cache ");
- break;
- case 7:
- p += sprintf(p, "Error in one or more functional units ");
- break;
- case 8:
- p += sprintf(p, "component failed self test ");
- break;
- case 9:
- p += sprintf(p, "Overflow or undervalue of internal queue ");
- break;
- case 17:
- p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR ");
- break;
- case 18:
- p += sprintf(p, "Improper access error ");
- break;
- case 19:
- p += sprintf(p, "Access to a memory address which is not mapped to any component ");
- break;
- case 20:
- p += sprintf(p, "Loss of Lockstep ");
- break;
- case 21:
- p += sprintf(p, "Response not associated with a request ");
- break;
- case 22:
- p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits ");
- break;
- case 23:
- p += sprintf(p, "Detection of a PATH_ERROR ");
- break;
- case 25:
- p += sprintf(p, "Bus operation timeout ");
- break;
- case 26:
- p += sprintf(p, "A read was issued to data that has been poisoned ");
- break;
- default:
- p += sprintf(p, "reserved ");
- break;
- }
- }
+ p += ghes_edac_mem_err_other_detail(mem_err, p, e->location);
if (p > pvt->other_detail)
*(p - 1) = '\0';
diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 08eabb2e23f8..6bf3e293c006 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -211,7 +211,7 @@ const char *cper_mem_err_type_str(unsigned int etype)
}
EXPORT_SYMBOL_GPL(cper_mem_err_type_str);
-int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
+int cper_mem_err_location(const struct cper_mem_err_compact *mem, char *msg)
{
u32 len, n;
@@ -265,7 +265,7 @@ int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg)
return n;
}
-int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
+int cper_dimm_err_location(const struct cper_mem_err_compact *mem, char *msg)
{
u32 len, n;
const char *bank = NULL, *device = NULL;
@@ -285,6 +285,48 @@ int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg)
return n;
}
+const char *cper_mem_err_status_str(u64 status)
+{
+ switch ((status >> 8) & 0xff) {
+ case 1:
+ return "Error detected internal to the component";
+ case 16:
+ return "Error detected in the bus";
+ case 4:
+ return "Storage error in DRAM memory";
+ case 5:
+ return "Storage error in TLB";
+ case 6:
+ return "Storage error in cache";
+ case 7:
+ return "Error in one or more functional units";
+ case 8:
+ return "component failed self test";
+ case 9:
+ return "Overflow or undervalue of internal queue";
+ case 17:
+ return "Virtual address not found on IO-TLB or IO-PDIR";
+ case 18:
+ return "Improper access error";
+ case 19:
+ return "Access to a memory address which is not mapped to any component";
+ case 20:
+ return "Loss of Lockstep";
+ case 21:
+ return "Response not associated with a request";
+ case 22:
+ return "Bus parity error - must also set the A, C, or D Bits";
+ case 23:
+ return "Detection of a PATH_ERROR ";
+ case 25:
+ return "Bus operation timeout";
+ case 26:
+ return "A read was issued to data that has been poisoned";
+ default:
+ return "reserved";
+ }
+}
+
void cper_mem_err_pack(const struct cper_sec_mem_err *mem,
struct cper_mem_err_compact *cmem)
{
@@ -334,7 +376,8 @@ static void cper_print_mem(const char *pfx, const struct cper_sec_mem_err *mem,
return;
}
if (mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS)
- printk("%s""error_status: 0x%016llx\n", pfx, mem->error_status);
+ printk("%s""error_status: 0x%016llx, %s\n", pfx, mem->error_status,
+ cper_mem_err_status_str(mem->error_status));
if (mem->validation_bits & CPER_MEM_VALID_PA)
printk("%s""physical_address: 0x%016llx\n",
pfx, mem->physical_addr);
diff --git a/include/linux/cper.h b/include/linux/cper.h
index 918e7efffb60..a45fb7ceacf8 100644
--- a/include/linux/cper.h
+++ b/include/linux/cper.h
@@ -568,7 +568,8 @@ void cper_print_proc_arm(const char *pfx,
const struct cper_sec_proc_arm *proc);
void cper_print_proc_ia(const char *pfx,
const struct cper_sec_proc_ia *proc);
-int cper_mem_err_location(struct cper_mem_err_compact *mem, char *msg);
-int cper_dimm_err_location(struct cper_mem_err_compact *mem, char *msg);
+int cper_mem_err_location(const struct cper_mem_err_compact *mem, char *msg);
+int cper_dimm_err_location(const struct cper_mem_err_compact *mem, char *msg);
+const char *cper_mem_err_status_str(u64 status);
#endif
--
2.20.1.12.g72788fdb
Powered by blists - more mailing lists