| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1638867233-8383-2-git-send-email-vincent.sunplus@gmail.com>
Date: Tue, 7 Dec 2021 16:53:52 +0800
From: Vincent Shih <vincent.sunplus@...il.com>
To: srinivas.kandagatla@...aro.org, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, devicetree@...r.kernel.org,
wells.lu@...plus.com
Cc: Vincent Shih <vincent.sunplus@...il.com>
Subject: [PATCH v2 1/2] nvmem: Add driver for OCOTP in Sunplus SP7021
Add driver for OCOTP in Sunplus SP7021
Signed-off-by: Vincent Shih <vincent.sunplus@...il.com>
---
Changes in v2:
- Merge sunplus-ocotp.h and sunplus-ocotp0.c to sunplus-ocotp.c
- Clean up codes.
MAINTAINERS | 5 +
drivers/nvmem/Kconfig | 12 ++
drivers/nvmem/Makefile | 2 +
drivers/nvmem/sunplus-ocotp.c | 268 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 287 insertions(+)
create mode 100644 drivers/nvmem/sunplus-ocotp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 80eebc1..0e6593a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17947,6 +17947,11 @@ L: netdev@...r.kernel.org
S: Maintained
F: drivers/net/ethernet/dlink/sundance.c
+SUNPLUS OCOTP DRIVER
+M: Vincent Shih <vincent.sunplus@...il.com>
+S: Maintained
+F: drivers/nvmem/sunplus-ocotp.c
+
SUPERH
M: Yoshinori Sato <ysato@...rs.sourceforge.jp>
M: Rich Felker <dalias@...c.org>
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index da41461..fb053d6 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -300,4 +300,16 @@ config NVMEM_BRCM_NVRAM
This driver provides support for Broadcom's NVRAM that can be accessed
using I/O mapping.
+config NVMEM_SUNPLUS_OCOTP
+ tristate "Sunplus SoC OTP support"
+ depends on SOC_SP7021
+ depends on HAS_IOMEM
+ help
+ This is a driver for the On-chip OTP controller (OCOTP) available
+ on Sunplus SoCs. It provids access to 128 bytes of one-time
+ programmable eFuse.
+
+ This driver can also be built as a module. If so, the module
+ will be called nvmem-sunplus-ocotp.
+
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index dcbbde3..0f14cd9 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -61,3 +61,5 @@ obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
nvmem-rmem-y := rmem.o
obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
nvmem_brcm_nvram-y := brcm_nvram.o
+obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
+nvmem_sunplus_ocotp-y := sunplus-ocotp.o
diff --git a/drivers/nvmem/sunplus-ocotp.c b/drivers/nvmem/sunplus-ocotp.c
new file mode 100644
index 0000000..2997b29
--- /dev/null
+++ b/drivers/nvmem/sunplus-ocotp.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * The OCOTP driver for Sunplus SP7021
+ *
+ * Copyright (C) 2019 Sunplus Technology Inc., All rights reseerved.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/*
+ * OTP memory
+ * Each bank contains 4 words (32 bits).
+ * Bank 0 starts at offset 0 from the base.
+ */
+
+#define OTP_WORDS_PER_BANK 4
+#define OTP_WORD_SIZE sizeof(u32)
+#define OTP_BIT_ADDR_OF_BANK (8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
+#define QAC628_OTP_NUM_BANKS 8
+#define QAC628_OTP_SIZE (QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
+#define OTP_READ_TIMEOUT 20000
+
+/* HB_GPIO */
+#define ADDRESS_8_DATA 0x20
+
+/* OTP_RX */
+#define OTP_CONTROL_2 0x48
+#define OTP_RD_PERIOD GENMASK(15, 8)
+#define OTP_RD_PERIOD_MASK ~GENMASK(15, 8)
+#define ONE_CPU_CLOCK 0x1
+#define SEL_BAK_KEY2 BIT(5)
+#define SEL_BAK_KEY2_MASK ~BIT(5)
+#define SW_TRIM_EN BIT(4)
+#define SW_TRIM_EN_MASK ~BIT(4)
+#define SEL_BAK_KEY BIT(3)
+#define SEL_BAK_KEY_MASK ~BIT(3)
+#define OTP_READ BIT(2)
+#define OTP_LOAD_SECURE_DATA BIT(1)
+#define OTP_LOAD_SECURE_DATA_MASK ~BIT(1)
+#define OTP_DO_CRC BIT(0)
+#define OTP_DO_CRC_MASK ~BIT(0)
+#define OTP_STATUS 0x4c
+#define OTP_READ_DONE BIT(4)
+#define OTP_READ_DONE_MASK ~BIT(4)
+#define OTP_LOAD_SECURE_DONE_MASK ~BIT(2)
+#define OTP_READ_ADDRESS 0x50
+
+enum base_type {
+ HB_GPIO,
+ OTPRX,
+ BASEMAX,
+};
+
+struct sp_otp_data_t {
+ struct device *dev;
+ void __iomem *base[BASEMAX];
+ struct clk *clk;
+ struct nvmem_config *config;
+};
+
+struct sp_otp_vX_t {
+ int size;
+};
+
+const struct sp_otp_vX_t sp_otp_v0 = {
+ .size = QAC628_OTP_SIZE,
+};
+
+static int sp_otp_wait(void __iomem *reg_base)
+{
+ int timeout = OTP_READ_TIMEOUT;
+ unsigned int status;
+
+ do {
+ usleep_range(10);
+ if (timeout-- == 0)
+ return -ETIMEDOUT;
+
+ status = readl(reg_base + OTP_STATUS);
+ } while ((status & OTP_READ_DONE) != OTP_READ_DONE);
+
+ return 0;
+}
+
+static int sp_otp_read_real(struct sp_otp_data_t *otp, int addr, char *value)
+{
+ unsigned int addr_data;
+ unsigned int byte_shift;
+ int ret = 0;
+
+ addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+ addr_data = addr_data / OTP_WORD_SIZE;
+
+ byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+ byte_shift = byte_shift % OTP_WORD_SIZE;
+
+ addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+ addr = addr * OTP_BIT_ADDR_OF_BANK;
+
+ writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
+ OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
+ writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
+ writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
+ otp->base[OTPRX] + OTP_CONTROL_2);
+ writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
+ & SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
+ otp->base[OTPRX] + OTP_CONTROL_2);
+ writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) |
+ ((ONE_CPU_CLOCK * 0x1e) << 8), otp->base[OTPRX] + OTP_CONTROL_2);
+
+ ret = sp_otp_wait(otp->base[OTPRX]);
+ if (ret < 0)
+ return ret;
+
+ *value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
+ >> (8 * byte_shift)) & 0xFF;
+
+ return ret;
+}
+
+static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
+{
+ struct sp_otp_data_t *otp = priv;
+ unsigned int addr;
+ char *buf = value;
+ char val[4];
+ int ret;
+
+ dev_dbg(otp->dev, "OTP read %u bytes at %u", bytes, offset);
+
+ if (offset >= QAC628_OTP_SIZE || bytes == 0 || ((offset + bytes) > QAC628_OTP_SIZE))
+ return -EINVAL;
+
+ ret = clk_enable(otp->clk);
+ if (ret)
+ return ret;
+
+ *buf = 0;
+ for (addr = offset; addr < (offset + bytes); addr++) {
+ ret = sp_otp_read_real(otp, addr, val);
+ if (ret < 0) {
+ dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
+ goto disable_clk;
+ }
+
+ *buf++ = *val;
+ }
+
+disable_clk:
+ clk_disable(otp->clk);
+ dev_dbg(otp->dev, "OTP read complete");
+
+ return ret;
+}
+
+static struct nvmem_config sp_ocotp_nvmem_config = {
+ .name = "sp-ocotp",
+ .read_only = true,
+ .word_size = 1,
+ .size = QAC628_OTP_SIZE,
+ .stride = 1,
+ .reg_read = sp_ocotp_read,
+ .owner = THIS_MODULE,
+};
+
+static int sp_ocotp_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ const struct sp_otp_vX_t *sp_otp_vX;
+ struct device *dev = &pdev->dev;
+ struct nvmem_device *nvmem;
+ struct sp_otp_data_t *otp;
+ struct resource *res;
+ int ret;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (match && match->data)
+ sp_otp_vX = match->data;
+ else
+ dev_err(dev, "OTP vX does not match");
+
+ otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
+ if (!otp)
+ return -ENOMEM;
+
+ otp->dev = dev;
+ otp->config = &sp_ocotp_nvmem_config;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
+ otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(otp->base[HB_GPIO]))
+ return dev_err_probe(&pdev->dev, PTR_ERR(otp->base[HB_GPIO]),
+ "hb_gpio devm_ioremap_resource fail\n");
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
+ otp->base[OTPRX] = devm_ioremap_resource(dev, res);
+ if (IS_ERR(otp->base[OTPRX]))
+ return dev_err_probe(&pdev->dev, PTR_ERR(otp->base[OTPRX]),
+ "otprx devm_ioremap_resource fail\n");
+
+ otp->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(otp->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
+ "devm_clk_get fail\n");
+
+ ret = clk_prepare(otp->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to prepare clk: %d\n", ret);
+ return ret;
+ }
+
+ sp_ocotp_nvmem_config.priv = otp;
+ sp_ocotp_nvmem_config.dev = dev;
+
+ nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
+ if (IS_ERR(nvmem))
+ return dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
+ "register nvmem device fail\n");
+
+ platform_set_drvdata(pdev, nvmem);
+
+ dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
+ QAC628_OTP_NUM_BANKS, OTP_WORDS_PER_BANK,
+ OTP_WORD_SIZE, QAC628_OTP_SIZE);
+
+ dev_info(dev, "by Sunplus (C) 2020");
+
+ return 0;
+}
+
+static const struct of_device_id sp_ocotp_dt_ids[] = {
+ { .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
+
+static struct platform_driver sp_otp_driver = {
+ .probe = sp_ocotp_probe,
+ .driver = {
+ .name = "sunplus,sp7021-ocotp",
+ .of_match_table = sp_ocotp_dt_ids,
+ }
+};
+
+static int __init sp_otp0_drv_new(void)
+{
+ return platform_driver_register(&sp_otp_driver);
+}
+subsys_initcall(sp_otp0_drv_new);
+
+static void __exit sp_otp0_drv_del(void)
+{
+ platform_driver_unregister(&sp_otp_driver);
+}
+module_exit(sp_otp0_drv_del);
+
+MODULE_AUTHOR("Vincent Shih <vincent.sunplus@...il.com>");
+MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
+MODULE_LICENSE("GPL v2");
+
--
2.7.4
Powered by blists - more mailing lists