| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211207140048.3d54c55f@coco.lan>
Date: Tue, 7 Dec 2021 14:01:30 +0100
From: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
To: Wei Xu <xuwei5@...ilicon.com>
Cc: Rob Herring <robh+dt@...nel.org>, <linuxarm@...wei.com>,
<mauro.chehab@...wei.com>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, Felipe Balbi <balbi@...com>
Subject: Re: [PATCH 3/5] arm64: dts: HiSilicon: Add support for HiKey 970
USB3 PHY
Em Tue, 7 Dec 2021 16:50:49 +0800
Wei Xu <xuwei5@...ilicon.com> escreveu:
> Hi Mauro,
>
> On 2021/11/16 19:59, Mauro Carvalho Chehab wrote:
> > Add the USB3 bindings for Kirin 970 phy and HiKey 970 board.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
> > ---
> >
> > To mailbombing on a large number of people, only mailing lists were C/C on the cover.
> > See [PATCH 0/5] at: https://lore.kernel.org/all/cover.1637063775.git.mchehab+huawei@kernel.org/
> >
> > .../boot/dts/hisilicon/hi3670-hikey970.dts | 83 +++++++++++++++++++
> > arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 +++++++++++++
> > 2 files changed, 139 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> > index 7c32f5fd5cc5..60594db07041 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> > +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
> > @@ -430,3 +430,86 @@ &uart6 {
> > label = "LS-UART1";
> > status = "okay";
> > };
> > +
> > +&usb_phy {
> > + phy-supply = <&ldo17>;
> > +};
> > +
> > +&i2c1 {
> > + status = "okay";
> > +
> > + rt1711h: rt1711h@4e {
> > + compatible = "richtek,rt1711h";
> > + reg = <0x4e>;
> > + status = "okay";
> > + interrupt-parent = <&gpio27>;
> > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&usb_cfg_func>;
> > +
> > + usb_con: connector {
> > + compatible = "usb-c-connector";
> > + label = "USB-C";
> > + data-role = "dual";
> > + power-role = "dual";
> > + try-power-role = "sink";
> > + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
> > + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
> > + PDO_VAR(5000, 5000, 1000)>;
> > + op-sink-microwatt = <10000000>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + port@1 {
> > + reg = <1>;
> > + usb_con_ss: endpoint {
> > + remote-endpoint = <&dwc3_ss>;
> > + };
> > + };
> > + };
> > + };
> > + port {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + rt1711h_ep: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&hikey_usb_ep1>;
> > + };
> > + };
> > + };
> > +};
> > +
> > +&i2c2 {
> > + /* USB HUB is on this bus at address 0x44 */
> > + status = "okay";
> > +};
> > +
> > +&dwc3 { /* USB */
> > + dr_mode = "otg";
> > + maximum-speed = "super-speed";
> > + phy_type = "utmi";
> > + snps,dis-del-phy-power-chg-quirk;
> > + snps,dis_u2_susphy_quirk;
> > + snps,dis_u3_susphy_quirk;
> > + snps,tx_de_emphasis_quirk;
> > + snps,tx_de_emphasis = <1>;
> > + snps,dis-split-quirk;
> > + snps,gctl-reset-quirk;
> > + usb-role-switch;
> > + role-switch-default-mode = "host";
> > + port {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + dwc3_role_switch: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&hikey_usb_ep0>;
> > + };
> > +
> > + dwc3_ss: endpoint@1 {
> > + reg = <1>;
> > + remote-endpoint = <&usb_con_ss>;
> > + };
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
> > index 225dccbcb064..b47654b50139 100644
> > --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
> > +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
> > @@ -8,6 +8,7 @@
> >
> > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > #include <dt-bindings/clock/hi3670-clock.h>
> > +#include <dt-bindings/usb/pd.h>
> >
> > / {
> > compatible = "hisilicon,hi3670";
> > @@ -892,5 +893,60 @@ i2c4: i2c@...0d000 {
> > pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
> > status = "disabled";
> > };
> > +
> > + usb3_otg_bc: usb3_otg_bc@...00000 {
> > + compatible = "syscon", "simple-mfd";
> > + reg = <0x0 0xff200000 0x0 0x1000>;
> > +
> > + usb_phy: usbphy {
> > + compatible = "hisilicon,hi3670-usb-phy";
> > + #phy-cells = <0>;
> > + hisilicon,pericrg-syscon = <&crg_ctrl>;
> > + hisilicon,pctrl-syscon = <&pctrl>;
> > + hisilicon,sctrl-syscon = <&sctrl>;
> > + hisilicon,eye-diagram-param = <0xFDFEE4>;
> > + hisilicon,tx-vboost-lvl = <0x5>;
> > + };
> > + };
> > +
> > + usb31_misc_rst: usb31_misc_rst_controller {
> > + compatible = "hisilicon,hi3660-reset";
> > + #reset-cells = <2>;
> > + hisi,rst-syscon = <&usb3_otg_bc>;
> > + };
> > +
> > + usb3: hisi_dwc3 {
> > + compatible = "hisilicon,hi3670-dwc3";
>
> Could you please also add a binding document for the "hi3670-dwc3"?
> The driver part has added the compatible string as you pointed out before.
Just sent a patch adding a compatible for it:
https://lore.kernel.org/all/fec9df1a99ad8639f23edc24cdcc3ec78ea31575.1638881845.git.mchehab+huawei@kernel.org/T/#u
This is basically a DWC3 driver, using drivers/usb/dwc3/dwc3-of-simple.c
to setup the needed clocks and reset pins needed by the DWC3 driver.
Thanks,
Mauro
Powered by blists - more mailing lists