[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211207015446.1250854-6-aford173@gmail.com>
Date: Mon, 6 Dec 2021 19:54:44 -0600
From: Adam Ford <aford173@...il.com>
To: linux-media@...r.kernel.org
Cc: cphealy@...il.com, benjamin.gaignard@...labora.com,
hverkuil@...all.nl, Adam Ford <aford173@...il.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Philipp Zabel <p.zabel@...gutronix.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Lucas Stach <l.stach@...gutronix.de>,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-staging@...ts.linux.dev
Subject: [RFC V2 5/6] media: hantro: split i.MX8MQ G1 and G2 code
The VPU in the i.MX8MQ is really the combination of Hantro G1 and
Hantro G2. With the updated vpu-blk-ctrl, the power domains system
can enable and disable them separately as well as pull them out of
reset. This simplifies the code and lets them run independently.
Signed-off-by: Adam Ford <aford173@...il.com>
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index ab2467998d29..d803252a5aba 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -608,8 +608,8 @@ static const struct of_device_id of_hantro_match[] = {
{ .compatible = "rockchip,rk3399-vpu", .data = &rk3399_vpu_variant, },
#endif
#ifdef CONFIG_VIDEO_HANTRO_IMX8M
- { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
- { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
+ { .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant, },
+ { .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant, },
#endif
#ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
{ .compatible = "microchip,sama5d4-vdec", .data = &sama5d4_vdec_variant, },
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index cff817ca8d22..122b83a16663 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -299,8 +299,8 @@ enum hantro_enc_fmt {
ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
};
+extern const struct hantro_variant imx8mq_vpu_g1_variant;
extern const struct hantro_variant imx8mq_vpu_g2_variant;
-extern const struct hantro_variant imx8mq_vpu_variant;
extern const struct hantro_variant px30_vpu_variant;
extern const struct hantro_variant rk3036_vpu_variant;
extern const struct hantro_variant rk3066_vpu_variant;
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index 1a43f6fceef9..c9f6e8472258 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -13,67 +13,6 @@
#include "hantro_g1_regs.h"
#include "hantro_g2_regs.h"
-#define CTRL_SOFT_RESET 0x00
-#define RESET_G1 BIT(1)
-#define RESET_G2 BIT(0)
-
-#define CTRL_CLOCK_ENABLE 0x04
-#define CLOCK_G1 BIT(1)
-#define CLOCK_G2 BIT(0)
-
-#define CTRL_G1_DEC_FUSE 0x08
-#define CTRL_G1_PP_FUSE 0x0c
-#define CTRL_G2_DEC_FUSE 0x10
-
-static void imx8m_soft_reset(struct hantro_dev *vpu, u32 reset_bits)
-{
- u32 val;
-
- /* Assert */
- val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
- val &= ~reset_bits;
- writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-
- udelay(2);
-
- /* Release */
- val = readl(vpu->ctrl_base + CTRL_SOFT_RESET);
- val |= reset_bits;
- writel(val, vpu->ctrl_base + CTRL_SOFT_RESET);
-}
-
-static void imx8m_clk_enable(struct hantro_dev *vpu, u32 clock_bits)
-{
- u32 val;
-
- val = readl(vpu->ctrl_base + CTRL_CLOCK_ENABLE);
- val |= clock_bits;
- writel(val, vpu->ctrl_base + CTRL_CLOCK_ENABLE);
-}
-
-static int imx8mq_runtime_resume(struct hantro_dev *vpu)
-{
- int ret;
-
- ret = clk_bulk_prepare_enable(vpu->variant->num_clocks, vpu->clocks);
- if (ret) {
- dev_err(vpu->dev, "Failed to enable clocks\n");
- return ret;
- }
-
- imx8m_soft_reset(vpu, RESET_G1 | RESET_G2);
- imx8m_clk_enable(vpu, CLOCK_G1 | CLOCK_G2);
-
- /* Set values of the fuse registers */
- writel(0xffffffff, vpu->ctrl_base + CTRL_G1_DEC_FUSE);
- writel(0xffffffff, vpu->ctrl_base + CTRL_G1_PP_FUSE);
- writel(0xffffffff, vpu->ctrl_base + CTRL_G2_DEC_FUSE);
-
- clk_bulk_disable_unprepare(vpu->variant->num_clocks, vpu->clocks);
-
- return 0;
-}
-
/*
* Supported formats.
*/
@@ -209,27 +148,6 @@ static irqreturn_t imx8m_vpu_g2_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static int imx8mq_vpu_hw_init(struct hantro_dev *vpu)
-{
- vpu->ctrl_base = vpu->reg_bases[vpu->variant->num_regs - 1];
-
- return 0;
-}
-
-static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
-{
- struct hantro_dev *vpu = ctx->dev;
-
- imx8m_soft_reset(vpu, RESET_G1);
-}
-
-static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
-{
- struct hantro_dev *vpu = ctx->dev;
-
- imx8m_soft_reset(vpu, RESET_G2);
-}
-
/*
* Supported codec ops.
*/
@@ -237,19 +155,16 @@ static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
[HANTRO_MODE_MPEG2_DEC] = {
.run = hantro_g1_mpeg2_dec_run,
- .reset = imx8m_vpu_g1_reset,
.init = hantro_mpeg2_dec_init,
.exit = hantro_mpeg2_dec_exit,
},
[HANTRO_MODE_VP8_DEC] = {
.run = hantro_g1_vp8_dec_run,
- .reset = imx8m_vpu_g1_reset,
.init = hantro_vp8_dec_init,
.exit = hantro_vp8_dec_exit,
},
[HANTRO_MODE_H264_DEC] = {
.run = hantro_g1_h264_dec_run,
- .reset = imx8m_vpu_g1_reset,
.init = hantro_h264_dec_init,
.exit = hantro_h264_dec_exit,
},
@@ -258,14 +173,12 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
[HANTRO_MODE_HEVC_DEC] = {
.run = hantro_g2_hevc_dec_run,
- .reset = imx8m_vpu_g2_reset,
.init = hantro_hevc_dec_init,
.exit = hantro_hevc_dec_exit,
},
[HANTRO_MODE_VP9_DEC] = {
.run = hantro_g2_vp9_dec_run,
.done = hantro_g2_vp9_dec_done,
- .reset = imx8m_vpu_g2_reset,
.init = hantro_vp9_dec_init,
.exit = hantro_vp9_dec_exit,
},
@@ -275,7 +188,7 @@ static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
* VPU variants.
*/
-static const struct hantro_irq imx8mq_irqs[] = {
+static const struct hantro_irq imx8mq_g1_irqs[] = {
{ "g1", imx8m_vpu_g1_irq },
};
@@ -283,10 +196,12 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
{ "g2", imx8m_vpu_g2_irq },
};
-static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
-static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
+static const char * const imx8mq_g1_clk_names[] = { "g1" };
+static const char * const imx8mq_g1_reg_names[] = { "g1" };
+static const char * const imx8mq_g2_clk_names[] = { "g2" };
+static const char * const imx8mq_g2_reg_names[] = { "g2" };
-const struct hantro_variant imx8mq_vpu_variant = {
+const struct hantro_variant imx8mq_vpu_g1_variant = {
.dec_fmts = imx8m_vpu_dec_fmts,
.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
.postproc_fmts = imx8m_vpu_postproc_fmts,
@@ -295,14 +210,12 @@ const struct hantro_variant imx8mq_vpu_variant = {
.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
HANTRO_H264_DECODER,
.codec_ops = imx8mq_vpu_codec_ops,
- .init = imx8mq_vpu_hw_init,
- .runtime_resume = imx8mq_runtime_resume,
- .irqs = imx8mq_irqs,
- .num_irqs = ARRAY_SIZE(imx8mq_irqs),
- .clk_names = imx8mq_clk_names,
- .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
- .reg_names = imx8mq_reg_names,
- .num_regs = ARRAY_SIZE(imx8mq_reg_names)
+ .irqs = imx8mq_g1_irqs,
+ .num_irqs = ARRAY_SIZE(imx8mq_g1_irqs),
+ .clk_names = imx8mq_g1_clk_names,
+ .num_clocks = ARRAY_SIZE(imx8mq_g1_clk_names),
+ .reg_names = imx8mq_g1_reg_names,
+ .num_regs = ARRAY_SIZE(imx8mq_g1_reg_names),
};
const struct hantro_variant imx8mq_vpu_g2_variant = {
@@ -314,10 +227,10 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
.postproc_ops = &hantro_g2_postproc_ops,
.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
.codec_ops = imx8mq_vpu_g2_codec_ops,
- .init = imx8mq_vpu_hw_init,
- .runtime_resume = imx8mq_runtime_resume,
.irqs = imx8mq_g2_irqs,
.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
- .clk_names = imx8mq_clk_names,
- .num_clocks = ARRAY_SIZE(imx8mq_clk_names),
+ .clk_names = imx8mq_g2_clk_names,
+ .num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
+ .reg_names = imx8mq_g2_reg_names,
+ .num_regs = ARRAY_SIZE(imx8mq_g2_reg_names),
};
--
2.32.0
Powered by blists - more mailing lists