| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211208003727.3596577-7-f.fainelli@gmail.com>
Date: Tue, 7 Dec 2021 16:37:17 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: devicetree@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
Damien Le Moal <damien.lemoal@...nsource.wdc.com>,
Rob Herring <robh+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM BCM7XXX ARM
ARCHITECTURE), Gregory Fong <gregory.0xf0@...il.com>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Thierry Reding <thierry.reding@...il.com>,
Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>, Lee Jones <lee.jones@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Herbert Xu <herbert@...dor.apana.org.au>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amitk@...nel.org>,
Zhang Rui <rui.zhang@...el.com>,
Markus Mayer <mmayer@...adcom.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Al Cooper <alcooperx@...il.com>,
Doug Berger <opendmb@...il.com>,
linux-ide@...r.kernel.org (open list:LIBATA SUBSYSTEM (Serial and
Parallel ATA drivers)), linux-kernel@...r.kernel.org (open list),
linux-gpio@...r.kernel.org (open list:GPIO SUBSYSTEM),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM7XXX
ARM ARCHITECTURE),
linux-mmc@...r.kernel.org (open list:MULTIMEDIA CARD (MMC), SECURE
DIGITAL (SD) AND...),
linux-pwm@...r.kernel.org (open list:PWM SUBSYSTEM),
linux-crypto@...r.kernel.org (open list:HARDWARE RANDOM NUMBER
GENERATOR CORE),
linux-rtc@...r.kernel.org (open list:REAL TIME CLOCK (RTC) SUBSYSTEM),
linux-pm@...r.kernel.org (open list:THERMAL),
linux-usb@...r.kernel.org (open list:USB SUBSYSTEM)
Subject: [PATCH v3 06/15] dt-binding: interrupt-controller: Convert BCM7038 L1 intc to YAML
Convert the Broadcom STB BCM7038 Level 1 interrupt controller Device
Tree binding to YAML to help with validation.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
.../brcm,bcm7038-l1-intc.txt | 61 -------------
.../brcm,bcm7038-l1-intc.yaml | 91 +++++++++++++++++++
2 files changed, 91 insertions(+), 61 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c1a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
- peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
- 2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
- the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
- source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
- node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
- wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
- have already been configured by the firmware and should be left unmanaged.
- This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface. In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@...1a400 {
- compatible = "brcm,bcm7038-l1-intc";
- reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
-
- interrupt-parent = <&cpu_intc>;
- interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000000..5ecb6faa70dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+ This block is a first level interrupt controller that is typically connected
+ directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip
+ since BCM7038 has contained this hardware.
+
+ Key elements of the hardware design include:
+
+ - 64, 96, 128, or 160 incoming level IRQ lines
+
+ - Most onchip peripherals are wired directly to an L1 input
+
+ - A separate instance of the register set for each CPU, allowing individual
+ peripheral IRQs to be routed to any CPU
+
+ - Atomic mask/unmask operations
+
+ - No polarity/level/edge settings
+
+ - No FIFO or priority encoder logic; software is expected to read all
+ 2-5 status words to determine which IRQs are pending
+
+ If multiple reg ranges and interrupt-parent entries are present on an SMP
+ system, the driver will allow IRQ SMP affinity to be set up through the
+ /proc/irq/ interface. In the simplest possible configuration, only one
+ reg range and one interrupt-parent is needed.
+
+maintainers:
+ - Florian Fainelli <f.fainelli@...il.com>
+
+allOf:
+ - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm7038-l1-intc
+
+ reg:
+ description: >
+ Specifies the base physical address and size of the registers
+ the number of supported IRQs is inferred from the size argument
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ description: >
+ Specifies the interrupt line(s) in the interrupt-parent controller node;
+ valid values depend on the type of parent interrupt controller
+
+ brcm,irq-can-wake:
+ type: boolean
+ description: >
+ If present, this means the L1 controller can be used as a
+ wakeup source for system suspend/resume.
+
+ brcm,int-fwd-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ If present, a bit mask to indicate which interrupts have already been
+ configured by the firmware and should be left unmanaged. This should
+ have one 32-bit word per status/set/clear/mask group.
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ periph_intc: interrupt-controller@...1a400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
--
2.25.1
Powered by blists - more mailing lists