[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1638955639-3584-1-git-send-email-yangtiezhu@loongson.cn>
Date: Wed, 8 Dec 2021 17:27:19 +0800
From: Tiezhu Yang <yangtiezhu@...ngson.cn>
To: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: Sergio Paracuellos <sergio.paracuellos@...il.com>,
Xuefeng Li <lixuefeng@...ngson.cn>, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2] MIPS: Only define pci_remap_iospace() for Ralink
After commit 9f76779f2418 ("MIPS: implement architecture-specific
'pci_remap_iospace()'"), there exists the following warning on the
Loongson64 platform:
loongson-pci 1a000000.pci: IO 0x0018020000..0x001803ffff -> 0x0000020000
loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
resource start address is not zero
...
Call Trace:
[<ffffffff8020dc78>] show_stack+0x40/0x120
[<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
[<ffffffff8023a0b0>] __warn+0xe0/0x110
[<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
[<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
[<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
[<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
[<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
[<ffffffff80819454>] loongson_pci_probe+0x34/0x160
[<ffffffff809203cc>] platform_probe+0x6c/0xe0
[<ffffffff8091d5d4>] really_probe+0xbc/0x340
[<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
[<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
[<ffffffff8091dea0>] __driver_attach+0x80/0x118
[<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
[<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
[<ffffffff8091ead4>] driver_register+0x8c/0x150
[<ffffffff80200a8c>] do_one_initcall+0x54/0x288
[<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
[<ffffffff80cfc380>] kernel_init+0x2c/0x134
[<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
---[ end trace e4a0efe10aa5cce6 ]---
loongson-pci 1a000000.pci: error -19: failed to map resource [io 0x20000-0x3ffff]
We can see that the resource start address is 0x0000020000, because
the ISA Bridge used the zero address which is defined in the dts file
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:
ISA Bridge: /bus@...00000/isa@...00000
IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000
Based on the above analysis, the architecture-specific pci_remap_iospace()
is not suitable for Loongson64, we should only define pci_remap_iospace()
for Ralink on MIPS based on the commit background.
Suggested-by: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Signed-off-by: Tiezhu Yang <yangtiezhu@...ngson.cn>
---
arch/mips/include/asm/mach-ralink/spaces.h | 2 ++
arch/mips/include/asm/pci.h | 4 ----
arch/mips/pci/pci-generic.c | 2 ++
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/mach-ralink/spaces.h b/arch/mips/include/asm/mach-ralink/spaces.h
index 05d14c2..f7af11e 100644
--- a/arch/mips/include/asm/mach-ralink/spaces.h
+++ b/arch/mips/include/asm/mach-ralink/spaces.h
@@ -6,5 +6,7 @@
#define PCI_IOSIZE SZ_64K
#define IO_SPACE_LIMIT (PCI_IOSIZE - 1)
+#define pci_remap_iospace pci_remap_iospace
+
#include <asm/mach-generic/spaces.h>
#endif
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 421231f..9ffc819 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -20,10 +20,6 @@
#include <linux/list.h>
#include <linux/of.h>
-#ifdef CONFIG_PCI_DRIVERS_GENERIC
-#define pci_remap_iospace pci_remap_iospace
-#endif
-
#ifdef CONFIG_PCI_DRIVERS_LEGACY
/*
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c
index 18eb8a4..d2d68bac 100644
--- a/arch/mips/pci/pci-generic.c
+++ b/arch/mips/pci/pci-generic.c
@@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
pci_read_bridge_bases(bus);
}
+#ifdef pci_remap_iospace
int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
{
unsigned long vaddr;
@@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr)
set_io_port_base(vaddr);
return 0;
}
+#endif
--
2.1.0
Powered by blists - more mailing lists