| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YbDdmHnHTU45OOXI@ripper>
Date: Wed, 8 Dec 2021 08:30:16 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add SM8450 pinctrl
bindings
On Tue 30 Nov 23:24 PST 2021, Vinod Koul wrote:
> Add device tree binding Documentation details for Qualcomm SM8450
> TLMM device
>
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
Regards,
Bjorn
> ---
> .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 143 ++++++++++++++++++
> 1 file changed, 143 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> new file mode 100644
> index 000000000000..9c891246245b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
> @@ -0,0 +1,143 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM8450 TLMM block
> +
> +maintainers:
> + - Vinod Koul <vkoul@...nel.org>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer (TLMM) block found
> + in the SM8450 platform.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,sm8450-tlmm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts: true
> + interrupt-controller: true
> + '#interrupt-cells': true
> + gpio-controller: true
> + gpio-reserved-ranges: true
> + '#gpio-cells': true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> + '-state$':
> + oneOf:
> + - $ref: "#/$defs/qcom-sm8450-tlmm-state"
> + - patternProperties:
> + ".*":
> + $ref: "#/$defs/qcom-sm8450-tlmm-state"
> +
> +$defs:
> + qcom-sm8450-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
> + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> + enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
> + cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
> + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> + ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
> + gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
> + mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
> + mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
> + mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
> + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
> + mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
> + pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
> + prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
> + qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
> + qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
> + qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
> + qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
> + qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
> + qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
> + sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
> + tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
> + tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
> + uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
> + usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
> +
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + pinctrl@...0000 {
> + compatible = "qcom,sm8450-tlmm";
> + reg = <0x0f100000 0x300000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 211>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gpio-wo-subnode-state {
> + pins = "gpio1";
> + function = "gpio";
> + };
> +
> + uart-w-subnodes-state {
> + rx {
> + pins = "gpio26";
> + function = "qup7";
> + bias-pull-up;
> + };
> +
> + tx {
> + pins = "gpio27";
> + function = "qup7";
> + bias-disable;
> + };
> + };
> + };
> +...
> --
> 2.31.1
>
Powered by blists - more mailing lists