[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20211209215350.4207-5-avolmat@me.com>
Date: Thu, 9 Dec 2021 22:53:49 +0100
From: Alain Volmat <avolmat@...com>
To: Rob Herring <robh+dt@...nel.org>, linux-pci@...r.kernel.org
Cc: Patrice Chotard <patrice.chotard@...s.st.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Fabrice Gasnier <fabrice.gasnier@...s.st.com>, avolmat@...com
Subject: [PATCH 4/5] ARM: dts: sti: add the PCIe controller node within stih407-family
Add the pcie1 entry within stih407-family dtsi.
Signed-off-by: Alain Volmat <avolmat@...com>
---
arch/arm/boot/dts/stih407-family.dtsi | 40 +++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 21f3347a91d6..fe4ea2d5b583 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -631,6 +631,46 @@ spifsm: spifsm@...2000{
status = "disabled";
};
+ pcie1: pcie@...0000 {
+ compatible = "st,stih407-pcie";
+ device_type = "pci";
+ reg = <0x09b10000 0x00001000>, /* cntrl registers */
+ <0x3fff0000 0x00010000>, /* config space */
+ <0x40000000 0xc0000000>; /* lmi mem window */
+
+ reg-names = "dbi",
+ "config",
+ "mem-window";
+
+ st,syscfg = <&syscfg_core 0xdc 0xe4>;
+
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ /* non-prefetchable and prefetchable */
+ ranges = <0x82000000 0 0x30000000 0x30000000 0 0x05550000>,
+ <0xc2000000 0 0x35550000 0x35550000 0 0x0AAA0000>;
+ bus-range = <0x00 0xff>;
+
+ resets = <&softreset STIH407_PCIE1_SOFTRESET>,
+ <&powerdown STIH407_PCIE1_POWERDOWN>;
+
+ reset-names = "softreset", "powerdown";
+
+ phys = <&phy_port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie";
+
+ status = "disabled";
+ };
+
sata0: sata@...0000 {
compatible = "st,ahci";
reg = <0x9b20000 0x1000>;
--
2.25.1
Powered by blists - more mailing lists