[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bebef734-d0d3-e78e-e07a-9160ead1f673@kernel.org>
Date: Thu, 9 Dec 2021 12:08:07 +0200
From: Roger Quadros <rogerq@...nel.org>
To: Miquel Raynal <miquel.raynal@...tlin.com>,
Rob Herring <robh@...nel.org>
Cc: Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Tony Lindgren <tony@...mide.com>, devicetree@...r.kernel.org,
Thierry Reding <thierry.reding@...il.com>,
linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] dt-bindings: mtd: ti,gpmc-nand: Add missing 'rb-gpios'
Hi Miquel,
On 09/12/2021 11:42, Miquel Raynal wrote:
> Hi Rob,
>
> robh@...nel.org wrote on Mon, 6 Dec 2021 11:42:09 -0600:
>
>> With 'unevaluatedProperties' support implemented, the TI GPMC example
>> has a warning:
>>
>> Documentation/devicetree/bindings/memory-controllers/ti,gpmc.example.dt.yaml: nand@0,0: Unevaluated properties are not allowed ('rb-gpios' was unexpected)
>>
>> Add the missing definition for 'rb-gpios'.
>
> rb-gpios is already defined in nand-controller.yaml. I seems like the
> real problem is that this file does not refer to it. Can you update the
> fix?
I don't think we can refer to nand-controller.yaml right now as we are not
fully compatible with it yet. Please see examples below.
ti,gpmc-nand example:
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
#address-cells = <1>;
#size-cells = <1>;
/* NAND generic properties */
nand-bus-width = <8>;
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
/* GPMC properties*/
gpmc,device-width = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x00040000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00040000 0x00040000>;
};
};
nand-controller example:
nand-controller {
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <0>, <&gpioA 1>; /* A single native CS is available */
/* controller specific properties */
nand@0 {
reg = <0>; /* Native CS */
nand-use-soft-ecc-engine;
nand-ecc-algo = "bch";
/* controller specific properties */
};
nand@1 {
reg = <1>; /* GPIO CS */
};
};
>
> While at it you might also want to drop the rb-gpios property from
> ingenic,nand.yaml, which also defines it a second time.
>
>> Cc: Miquel Raynal <miquel.raynal@...tlin.com>
>> Cc: Richard Weinberger <richard@....at>
>> Cc: Vignesh Raghavendra <vigneshr@...com>
>> Cc: Tony Lindgren <tony@...mide.com>
>> Cc: Roger Quadros <rogerq@...nel.org>
>> Cc: linux-mtd@...ts.infradead.org
>> Signed-off-by: Rob Herring <robh@...nel.org>
>> ---
>> Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
>> index beb26b9bcfb2..1c280f52baa0 100644
>> --- a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
>> @@ -53,6 +53,11 @@ properties:
>> enum: [8, 16]
>> default: 8
>>
>> + rb-gpios:
>> + description:
>> + GPIO connection to R/B signal from NAND chip
>> + maxItems: 1
>> +
>> patternProperties:
>> "@[0-9a-f]+$":
>> $ref: "/schemas/mtd/partitions/partition.yaml"
>
> Thanks,
> Miquèl
>
cheers,
-roger
Powered by blists - more mailing lists