[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20211209121949.61135-1-benchuanggli@gmail.com>
Date: Thu, 9 Dec 2021 20:19:49 +0800
From: Ben Chuang <benchuanggli@...il.com>
To: marcan@...can.st
Cc: adrian.hunter@...el.com, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, maz@...nel.org, sven@...npeter.dev,
ulf.hansson@...aro.org, benchuanggli@...il.com
Subject: Re: [PATCH 2/2] mmc: sdhci-pci-gli: GL9755: Issue 8/16-bit MMIO reads as 32-bit reads.
Hi Hector,
On Tue, 7 Dec 2021 15:40:19 +0900, Hector Martin <marcan@...can.st> wrote:
>
> For some reason, <32-bit reads do not work on Apple ARM64 platforms with
> these chips (even though they do on other PCIe devices). Issue them as
> 32-bit reads instead. This is done unconditionally, as it shouldn't hurt
> even if not necessary.
>
> Signed-off-by: Hector Martin <marcan@...can.st>
> ---
> drivers/mmc/host/sdhci-pci-gli.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index ad742743a494..31547fed0952 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -906,7 +906,26 @@ static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot)
> return 0;
> }
>
> +#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
> +
> +static u16 sdhci_gli_readw(struct sdhci_host *host, int reg)
> +{
> + u32 val = readl(host->ioaddr + (reg & ~3));
> + u16 word;
> + word = (val >> REG_OFFSET_IN_BITS(reg)) & 0xffff;
checkpatch says "
WARNING: Missing a blank line after declarations
#71: FILE: drivers/mmc/host/sdhci-pci-gli.c:915:
+ u16 word;
+ word = (val >> REG_OFFSET_IN_BITS(reg)) & 0xffff;
"
> + return word;
> +}
> +
> +static u8 sdhci_gli_readb(struct sdhci_host *host, int reg)
> +{
> + u32 val = readl(host->ioaddr + (reg & ~3));
> + u8 byte = (val >> REG_OFFSET_IN_BITS(reg)) & 0xff;
> + return byte;
> +}
> +
> static const struct sdhci_ops sdhci_gl9755_ops = {
> + .read_w = sdhci_gli_readw,
> + .read_b = sdhci_gli_readb,
I think GL9750 also need this patch.
Can you help to add these two functions to sdhci_gl9750_ops?
Best regards,
Ben
> .set_clock = sdhci_gl9755_set_clock,
> .enable_dma = sdhci_pci_enable_dma,
> .set_bus_width = sdhci_set_bus_width,
> --
> 2.33.0
Powered by blists - more mailing lists