| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20211209162020.105255-3-nikita@trvn.ru>
Date: Thu, 9 Dec 2021 21:20:20 +0500
From: Nikita Travkin <nikita@...n.ru>
To: thierry.reding@...il.com, lee.jones@...aro.org
Cc: u.kleine-koenig@...gutronix.de, robh+dt@...nel.org,
sboyd@...nel.org, linus.walleij@...aro.org, masneyb@...tation.org,
linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht,
Nikita Travkin <nikita@...n.ru>
Subject: [PATCH 2/2] pwm: Add clock based PWM output driver
Some systems have clocks exposed to external devices. If the clock
controller supports duty-cycle configuration, such clocks can be used as
pwm outputs. In fact PWM and CLK subsystems are interfaced with in a
similar way and an "opposite" driver already exists (clk-pwm). Add a
driver that would enable pwm devices to be used via clk subsystem.
Signed-off-by: Nikita Travkin <nikita@...n.ru>
---
drivers/pwm/Kconfig | 10 ++++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-clk.c | 119 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 130 insertions(+)
create mode 100644 drivers/pwm/pwm-clk.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 21e3b05a5153..daa2491a4054 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -140,6 +140,16 @@ config PWM_BRCMSTB
To compile this driver as a module, choose M Here: the module
will be called pwm-brcmstb.c.
+config PWM_CLK
+ tristate "Clock based PWM support"
+ depends on HAVE_CLK || COMPILE_TEST
+ help
+ Generic PWM framework driver for outputs that can be
+ muxed to clocks.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-clk.
+
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 708840b7fba8..4a860103c470 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
obj-$(CONFIG_PWM_BERLIN) += pwm-berlin.o
obj-$(CONFIG_PWM_BRCMSTB) += pwm-brcmstb.o
+obj-$(CONFIG_PWM_CLK) += pwm-clk.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_CROS_EC) += pwm-cros-ec.o
diff --git a/drivers/pwm/pwm-clk.c b/drivers/pwm/pwm-clk.c
new file mode 100644
index 000000000000..11c156529761
--- /dev/null
+++ b/drivers/pwm/pwm-clk.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct pwm_clk_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+};
+
+#define to_pwm_clk_chip(_chip) container_of(_chip, struct pwm_clk_chip, chip)
+
+static int pwm_clk_apply(struct pwm_chip *pwm_chip, struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct pwm_clk_chip *chip = to_pwm_clk_chip(pwm_chip);
+ int ret;
+ u32 rate;
+
+ if (!state->enabled && !pwm->state.enabled)
+ return 0;
+
+ if (state->enabled && !pwm->state.enabled) {
+ ret = clk_enable(chip->clk);
+ if (ret)
+ return ret;
+ }
+
+ if (!state->enabled && pwm->state.enabled) {
+ clk_disable(chip->clk);
+ return 0;
+ }
+
+ rate = div64_u64(NSEC_PER_SEC, state->period);
+ ret = clk_set_rate(chip->clk, rate);
+ if (ret)
+ return ret;
+
+ return clk_set_duty_cycle(chip->clk, state->duty_cycle, state->period);
+}
+
+static const struct pwm_ops pwm_clk_ops = {
+ .apply = pwm_clk_apply,
+ .owner = THIS_MODULE,
+};
+
+static int pwm_clk_probe(struct platform_device *pdev)
+{
+ struct pwm_clk_chip *chip;
+ int ret;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(chip->clk)) {
+ dev_err(&pdev->dev, "Failed to get clock: %ld\n", PTR_ERR(chip->clk));
+ return PTR_ERR(chip->clk);
+ }
+
+ chip->chip.dev = &pdev->dev;
+ chip->chip.ops = &pwm_clk_ops;
+ chip->chip.of_xlate = of_pwm_xlate_with_flags;
+ chip->chip.of_pwm_n_cells = 2;
+ chip->chip.base = 0;
+ chip->chip.npwm = 1;
+
+ ret = clk_prepare(chip->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to prepare clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = pwmchip_add(&chip->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to add pwm chip: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, chip);
+ return 0;
+}
+
+static int pwm_clk_remove(struct platform_device *pdev)
+{
+ struct pwm_clk_chip *chip = platform_get_drvdata(pdev);
+
+ clk_unprepare(chip->clk);
+
+ pwmchip_remove(&chip->chip);
+ return 0;
+}
+
+static const struct of_device_id pwm_clk_dt_ids[] = {
+ { .compatible = "clk-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, pwm_clk_dt_ids);
+
+static struct platform_driver pwm_clk_driver = {
+ .driver = {
+ .name = "clk-pwm",
+ .of_match_table = pwm_clk_dt_ids,
+ },
+ .probe = pwm_clk_probe,
+ .remove = pwm_clk_remove,
+};
+module_platform_driver(pwm_clk_driver);
+
+MODULE_ALIAS("platform:clk-pwm");
+MODULE_AUTHOR("Nikita Travkin <nikita@...n.ru>");
+MODULE_DESCRIPTION("Clock based PWM driver");
+MODULE_LICENSE("GPL v2");
--
2.30.2
Powered by blists - more mailing lists