| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BN9PR12MB52733A443AA5D5A690CE7132C0719@BN9PR12MB5273.namprd12.prod.outlook.com>
Date: Fri, 10 Dec 2021 09:38:39 +0000
From: Akhil R <akhilrajeev@...dia.com>
To: Dmitry Osipenko <digetx@...il.com>,
"andy.shevchenko@...il.com" <andy.shevchenko@...il.com>,
"christian.koenig@....com" <christian.koenig@....com>,
Jonathan Hunter <jonathanh@...dia.com>,
Laxman Dewangan <ldewangan@...dia.com>,
"linux-i2c@...r.kernel.org" <linux-i2c@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-tegra@...r.kernel.org" <linux-tegra@...r.kernel.org>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>,
"sumit.semwal@...aro.org" <sumit.semwal@...aro.org>,
"thierry.reding@...il.com" <thierry.reding@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert
functions
> 09.12.2021 18:05, Akhil R пишет:
> > Emulate the SMBus block read using ContinueXfer and SMBus using GPIO
> > interrupt.
> >
> > For SMBus block read, the driver reads the first byte with
> > ContinueXfer set which will help to parse the data count and read the
> > remaining bytes without stop condition in between.
> > SMBus alert is implemented using external gpio interrupt.
> >
> > Signed-off-by: Akhil R <akhilrajeev@...dia.com>
> > ---
> > drivers/i2c/busses/i2c-tegra.c | 54
> > +++++++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 53 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-tegra.c
> > b/drivers/i2c/busses/i2c-tegra.c index a5be8f0..3b70013 100644
> > --- a/drivers/i2c/busses/i2c-tegra.c
> > +++ b/drivers/i2c/busses/i2c-tegra.c
> > @@ -14,6 +14,7 @@
> > #include <linux/dma-mapping.h>
> > #include <linux/err.h>
> > #include <linux/i2c.h>
> > +#include <linux/i2c-smbus.h>
> > #include <linux/init.h>
> > #include <linux/interrupt.h>
> > #include <linux/io.h>
> > @@ -226,6 +227,11 @@ struct tegra_i2c_hw_feature {
> > bool has_interface_timing_reg;
> > };
> >
> > +struct tegra_i2c_smbalert {
>
> smbalert isn't a word, should be smbus_alert. Same for the GPIO name and
> other places.
The actual notation, I suppose, is SMBALERT#. If you see it is better to make it
smbus_alert, I can update it. 'smbalert' also looks good to me though.
>
> > + struct i2c_smbus_alert_setup alert_data;
> > + struct i2c_client *ara;
>
> What "ara" stands for? Please use meaningful names, like alert_dev for
> example.
i2c-smbus.c uses the same name to refer to the smbus alert i2c_client.
I thought to use the same for consistency with the core and other drivers.
It stands for "Alert response address".
>
> I don't see where this member is used at all, please remove it.
Wouldn't it be good to have it stored so that it is handy if using any other
function later, like i2c_handle_smbus_alert. Moreover, I thought to keep
the usage consistent with other drivers having similar function.
>
> > +};
> > +
> > /**
> > * struct tegra_i2c_dev - per device I2C context
> > * @dev: device reference for power management @@ -280,6 +286,8 @@
> > struct tegra_i2c_dev {
> > int msg_err;
> > u8 *msg_buf;
> >
> > + struct tegra_i2c_smbalert smbalert;
>
> All properties must have doc comment.
Agree
>
> > struct completion dma_complete;
> > struct dma_chan *tx_dma_chan;
> > struct dma_chan *rx_dma_chan;
> > @@ -1232,6 +1240,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev
> *i2c_dev,
> > return err;
> >
> > i2c_dev->msg_buf = msg->buf;
> > +
> > + /* The condition true implies smbus block read and len is
> > + already read*/
>
> Proper SMBus capitalization in comments. Mussing whitespace in the end of the
> comment.
Agree.
>
> > + if (msg->flags & I2C_M_RECV_LEN && end_state !=
> MSG_END_CONTINUE)
> > + i2c_dev->msg_buf = msg->buf + 1;
> > +
> > i2c_dev->msg_buf_remaining = msg->len;
> > i2c_dev->msg_err = I2C_ERR_NONE;
> > i2c_dev->msg_read = !!(msg->flags & I2C_M_RD); @@ -1388,6
> > +1401,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct
> i2c_msg msgs[],
> > else
> > end_type = MSG_END_REPEAT_START;
> > }
> > + /* If M_RECV_LEN use ContinueXfer to read the first byte */
> > + if (msgs[i].flags & I2C_M_RECV_LEN) {
> > + ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i],
> MSG_END_CONTINUE);
> > + if (ret)
> > + break;
> > + /* Set the read byte as msg len */
> > + msgs[i].len = msgs[i].buf[0];
> > + dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
> > + }
> > ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
> > if (ret)
> > break;
> > @@ -1415,7 +1437,8 @@ static u32 tegra_i2c_func(struct i2c_adapter
> > *adap) {
> > struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
> > u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL &
> ~I2C_FUNC_SMBUS_QUICK) |
> > - I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
> > + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_10BIT_ADDR |
> > + I2C_FUNC_PROTOCOL_MANGLING;
> >
> > if (i2c_dev->hw->has_continue_xfer_support)
> > ret |= I2C_FUNC_NOSTART; @@ -1727,6 +1750,29 @@ static
> > int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev)
> > return ret;
> > }
> >
> > +static int tegra_i2c_setup_smbalert(struct tegra_i2c_dev *i2c_dev) {
> > + struct tegra_i2c_smbalert *smbalert = &i2c_dev->smbalert;
> > + struct gpio_desc *alert_gpiod;
> > + struct i2c_client *ara;
> > +
> > + alert_gpiod = devm_gpiod_get(i2c_dev->dev, "smbalert", GPIOD_IN);
> > + if (IS_ERR(alert_gpiod))
> > + return PTR_ERR(alert_gpiod);
> > +
> > + smbalert->alert_data.irq = gpiod_to_irq(alert_gpiod);
> > + if (smbalert->alert_data.irq <= 0)
> > + return smbalert->alert_data.irq;
> > +
> > + ara = i2c_new_smbus_alert_device(&i2c_dev->adapter, &smbalert-
> >alert_data);
> > + if (IS_ERR(ara))
> > + return PTR_ERR(ara);
> > +
> > + smbalert->ara = ara;
> > +
> > + return 0;
> > +}
> > +
> > static int tegra_i2c_probe(struct platform_device *pdev) {
> > struct tegra_i2c_dev *i2c_dev;
> > @@ -1821,6 +1867,12 @@ static int tegra_i2c_probe(struct platform_device
> *pdev)
> > if (err)
> > goto release_rpm;
> >
> > + if (device_property_read_bool(i2c_dev->dev, "smbus-alert")) {
>
> I'd move this device_property_read_bool() inside of
> tegra_i2c_setup_smbus_alert(), for consistency with the rest of the code in this
> driver.
Agree.
>
> Although, you shouldn't need it at all, use devm_gpiod_get_optional().
smbus-alert is provided in the i2c dt bindings by default. I felt it is good
to put it into use since the use case is same.
>
> > + err = tegra_i2c_setup_smbalert(i2c_dev);
> > + if (err)
> > + dev_warn(&pdev->dev, "smbus-alert setup failed:
> > + %d\n", err);
>
> GPIO may probe-defer, must be dev_err_probe() here.
Agree. Also, will check on the option to use interrupt directly instead of
GPIO.
Thanks,
Akhil
Powered by blists - more mailing lists