| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20211213120502.20661-3-henning.schild@siemens.com>
Date: Mon, 13 Dec 2021 13:05:00 +0100
From: Henning Schild <henning.schild@...mens.com>
To: <linux-kernel@...r.kernel.org>, <linux-leds@...r.kernel.org>,
<platform-driver-x86@...r.kernel.org>,
<linux-watchdog@...r.kernel.org>
CC: Srikanth Krishnakar <skrishnakar@...il.com>,
Jan Kiszka <jan.kiszka@...mens.com>,
Henning Schild <henning.schild@...mens.com>,
"Gerd Haeussler" <gerd.haeussler.ext@...mens.com>,
Guenter Roeck <linux@...ck-us.net>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Mark Gross <mgross@...ux.intel.com>,
Hans de Goede <hdegoede@...hat.com>,
Pavel Machek <pavel@....cz>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Enrico Weigelt <lkml@...ux.net>
Subject: [PATCH v5 2/4] leds: simatic-ipc-leds: add new driver for Siemens Industial PCs
This driver adds initial support for several devices from Siemens. It is
based on a platform driver introduced in an earlier commit.
One of the supported machines has GPIO connected LEDs, here we poke GPIO
memory directly because pinctrl does not come up.
Signed-off-by: Henning Schild <henning.schild@...mens.com>
---
drivers/leds/Kconfig | 3 +
drivers/leds/Makefile | 3 +
drivers/leds/simple/Kconfig | 11 ++
drivers/leds/simple/Makefile | 2 +
drivers/leds/simple/simatic-ipc-leds.c | 202 +++++++++++++++++++++++++
5 files changed, 221 insertions(+)
create mode 100644 drivers/leds/simple/Kconfig
create mode 100644 drivers/leds/simple/Makefile
create mode 100644 drivers/leds/simple/simatic-ipc-leds.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ed800f5da7d8..ac6688d7a3f4 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -879,4 +879,7 @@ source "drivers/leds/flash/Kconfig"
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
+comment "Simple LED drivers"
+source "drivers/leds/simple/Kconfig"
+
endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index c636ec069612..1a719caf14c0 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -105,3 +105,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += trigger/
# LED Blink
obj-y += blink/
+
+# Simple LED drivers
+obj-y += simple/
diff --git a/drivers/leds/simple/Kconfig b/drivers/leds/simple/Kconfig
new file mode 100644
index 000000000000..9f6a68336659
--- /dev/null
+++ b/drivers/leds/simple/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config LEDS_SIEMENS_SIMATIC_IPC
+ tristate "LED driver for Siemens Simatic IPCs"
+ depends on LEDS_CLASS
+ depends on SIEMENS_SIMATIC_IPC
+ help
+ This option enables support for the LEDs of several Industrial PCs
+ from Siemens.
+
+ To compile this driver as a module, choose M here: the module
+ will be called simatic-ipc-leds.
diff --git a/drivers/leds/simple/Makefile b/drivers/leds/simple/Makefile
new file mode 100644
index 000000000000..8481f1e9e360
--- /dev/null
+++ b/drivers/leds/simple/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_LEDS_SIEMENS_SIMATIC_IPC) += simatic-ipc-leds.o
diff --git a/drivers/leds/simple/simatic-ipc-leds.c b/drivers/leds/simple/simatic-ipc-leds.c
new file mode 100644
index 000000000000..ff2c96e73241
--- /dev/null
+++ b/drivers/leds/simple/simatic-ipc-leds.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Siemens SIMATIC IPC driver for LEDs
+ *
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ * Henning Schild <henning.schild@...mens.com>
+ * Jan Kiszka <jan.kiszka@...mens.com>
+ * Gerd Haeussler <gerd.haeussler.ext@...mens.com>
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_data/x86/simatic-ipc-base.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/spinlock.h>
+
+#define SIMATIC_IPC_LED_PORT_BASE 0x404E
+
+struct simatic_ipc_led {
+ unsigned int value; /* mask for io and offset for mem */
+ char *name;
+ struct led_classdev cdev;
+};
+
+static struct simatic_ipc_led simatic_ipc_leds_io[] = {
+ {1 << 15, "green:" LED_FUNCTION_STATUS "-1" },
+ {1 << 7, "yellow:" LED_FUNCTION_STATUS "-1" },
+ {1 << 14, "red:" LED_FUNCTION_STATUS "-2" },
+ {1 << 6, "yellow:" LED_FUNCTION_STATUS "-2" },
+ {1 << 13, "red:" LED_FUNCTION_STATUS "-3" },
+ {1 << 5, "yellow:" LED_FUNCTION_STATUS "-3" },
+ { }
+};
+
+/* the actual start will be discovered with PCI, 0 is a placeholder */
+struct resource simatic_ipc_led_mem_res = DEFINE_RES_MEM_NAMED(0, SZ_4K, KBUILD_MODNAME);
+
+static void *simatic_ipc_led_memory;
+
+static struct simatic_ipc_led simatic_ipc_leds_mem[] = {
+ {0x500 + 0x1A0, "red:" LED_FUNCTION_STATUS "-1"},
+ {0x500 + 0x1A8, "green:" LED_FUNCTION_STATUS "-1"},
+ {0x500 + 0x1C8, "red:" LED_FUNCTION_STATUS "-2"},
+ {0x500 + 0x1D0, "green:" LED_FUNCTION_STATUS "-2"},
+ {0x500 + 0x1E0, "red:" LED_FUNCTION_STATUS "-3"},
+ {0x500 + 0x198, "green:" LED_FUNCTION_STATUS "-3"},
+ { }
+};
+
+static struct resource simatic_ipc_led_io_res =
+ DEFINE_RES_IO_NAMED(SIMATIC_IPC_LED_PORT_BASE, SZ_2, KBUILD_MODNAME);
+
+static DEFINE_SPINLOCK(reg_lock);
+
+static inline struct simatic_ipc_led *cdev_to_led(struct led_classdev *led_cd)
+{
+ return container_of(led_cd, struct simatic_ipc_led, cdev);
+}
+
+static void simatic_ipc_led_set_io(struct led_classdev *led_cd,
+ enum led_brightness brightness)
+{
+ struct simatic_ipc_led *led = cdev_to_led(led_cd);
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(®_lock, flags);
+
+ val = inw(SIMATIC_IPC_LED_PORT_BASE);
+ if (brightness == LED_OFF)
+ outw(val | led->value, SIMATIC_IPC_LED_PORT_BASE);
+ else
+ outw(val & ~led->value, SIMATIC_IPC_LED_PORT_BASE);
+
+ spin_unlock_irqrestore(®_lock, flags);
+}
+
+static enum led_brightness simatic_ipc_led_get_io(struct led_classdev *led_cd)
+{
+ struct simatic_ipc_led *led = cdev_to_led(led_cd);
+
+ return inw(SIMATIC_IPC_LED_PORT_BASE) & led->value ? LED_OFF : led_cd->max_brightness;
+}
+
+static void simatic_ipc_led_set_mem(struct led_classdev *led_cd,
+ enum led_brightness brightness)
+{
+ struct simatic_ipc_led *led = cdev_to_led(led_cd);
+
+ u32 *p;
+
+ p = simatic_ipc_led_memory + led->value;
+ *p = (*p & ~1) | (brightness == LED_OFF);
+}
+
+static enum led_brightness simatic_ipc_led_get_mem(struct led_classdev *led_cd)
+{
+ struct simatic_ipc_led *led = cdev_to_led(led_cd);
+
+ u32 *p;
+
+ p = simatic_ipc_led_memory + led->value;
+ return (*p & 1) ? LED_OFF : led_cd->max_brightness;
+}
+
+static int simatic_ipc_leds_probe(struct platform_device *pdev)
+{
+ const struct simatic_ipc_platform *plat = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct simatic_ipc_led *ipcled;
+ struct led_classdev *cdev;
+ struct resource *res;
+ int err, type;
+ u32 *p;
+
+ switch (plat->devmode) {
+ case SIMATIC_IPC_DEVICE_227D:
+ case SIMATIC_IPC_DEVICE_427E:
+ res = &simatic_ipc_led_io_res;
+ ipcled = simatic_ipc_leds_io;
+ /* on 227D the two bytes work the other way araound */
+ if (plat->devmode == SIMATIC_IPC_DEVICE_227D) {
+ while (ipcled->value) {
+ ipcled->value = swab16(ipcled->value);
+ ipcled++;
+ }
+ ipcled = simatic_ipc_leds_io;
+ }
+ type = IORESOURCE_IO;
+ if (!devm_request_region(dev, res->start, resource_size(res), KBUILD_MODNAME)) {
+ dev_err(dev, "Unable to register IO resource at %pR\n", res);
+ return -EBUSY;
+ }
+ break;
+ case SIMATIC_IPC_DEVICE_127E:
+ res = &simatic_ipc_led_mem_res;
+ ipcled = simatic_ipc_leds_mem;
+ type = IORESOURCE_MEM;
+
+ /* get GPIO base from PCI */
+ res->start = simatic_ipc_get_membase0(PCI_DEVFN(13, 0));
+ if (res->start == 0)
+ return -ENODEV;
+
+ /* do the final address calculation */
+ res->start = res->start + (0xC5 << 16);
+ res->end += res->start;
+
+ simatic_ipc_led_memory = devm_ioremap_resource(dev, res);
+ if (IS_ERR(simatic_ipc_led_memory))
+ return PTR_ERR(simatic_ipc_led_memory);
+
+ /* initialize power/watchdog LED */
+ p = simatic_ipc_led_memory + 0x500 + 0x1D8; /* PM_WDT_OUT */
+ *p = (*p & ~1);
+ p = simatic_ipc_led_memory + 0x500 + 0x1C0; /* PM_BIOS_BOOT_N */
+ *p = (*p | 1);
+
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ while (ipcled->value) {
+ cdev = &ipcled->cdev;
+ if (type == IORESOURCE_MEM) {
+ cdev->brightness_set = simatic_ipc_led_set_mem;
+ cdev->brightness_get = simatic_ipc_led_get_mem;
+ } else {
+ cdev->brightness_set = simatic_ipc_led_set_io;
+ cdev->brightness_get = simatic_ipc_led_get_io;
+ }
+ cdev->max_brightness = LED_ON;
+ cdev->name = ipcled->name;
+
+ err = devm_led_classdev_register(dev, cdev);
+ if (err < 0)
+ return err;
+ ipcled++;
+ }
+
+ return 0;
+}
+
+static struct platform_driver simatic_ipc_led_driver = {
+ .probe = simatic_ipc_leds_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ }
+};
+
+module_platform_driver(simatic_ipc_led_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
+MODULE_AUTHOR("Henning Schild <henning.schild@...mens.com>");
--
2.32.0
Powered by blists - more mailing lists