[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <SJ0PR02MB8449CB45F47541CC84C7136BCD749@SJ0PR02MB8449.namprd02.prod.outlook.com>
Date: Mon, 13 Dec 2021 17:22:26 +0000
From: "Sajida Bhanu (Temp) (QUIC)" <quic_c_sbhanu@...cinc.com>
To: Doug Anderson <dianders@...omium.org>,
"Sajida Bhanu (Temp) (QUIC)" <quic_c_sbhanu@...cinc.com>
CC: Doug Anderson <dianders@...omium.org>,
"tudor.ambarus@...rochip.com" <tudor.ambarus@...rochip.com>,
"michael@...le.cc" <michael@...le.cc>,
"p.yadav@...com" <p.yadav@...com>,
"miquel.raynal@...tlin.com" <miquel.raynal@...tlin.com>,
"richard@....at" <richard@....at>,
"vigneshr@...com" <vigneshr@...com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"stummala@...eaurora.org" <stummala@...eaurora.org>,
"vbadigan@...eaurora.org" <vbadigan@...eaurora.org>,
"Ram Prakash Gupta (QUIC)" <quic_rampraka@...cinc.com>,
"Pradeep Pragallapati (QUIC)" <quic_pragalla@...cinc.com>,
"sartgarg@...eaurora.org" <sartgarg@...eaurora.org>
Subject: RE: [PATCH V2] mtd: spi-nor: winbond: Add support for winbond chip
Hi ,
Thanks for the review.
Sure, Will make the change.
Thanks,
Sajida
-----Original Message-----
From: Doug Anderson <dianders@...omium.org>
Sent: Monday, December 13, 2021 9:22 PM
To: Sajida Bhanu (Temp) (QUIC) <quic_c_sbhanu@...cinc.com>
Cc: tudor.ambarus@...rochip.com; michael@...le.cc; p.yadav@...com; miquel.raynal@...tlin.com; richard@....at; vigneshr@...com; linux-mtd@...ts.infradead.org; linux-kernel@...r.kernel.org; stummala@...eaurora.org; vbadigan@...eaurora.org; Ram Prakash Gupta (QUIC) <quic_rampraka@...cinc.com>; Pradeep Pragallapati (QUIC) <quic_pragalla@...cinc.com>; sartgarg@...eaurora.org
Subject: Re: [PATCH V2] mtd: spi-nor: winbond: Add support for winbond chip
Hi,
On Wed, Dec 1, 2021 at 10:38 PM Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com> wrote:
>
> Add support for winbond W25Q512NW-IM chip.
>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
> ---
> Changes since V1:
> Added space before name of the flash part as suggested by Doug.
When someone comments on V1, it's nice to CC them on V2. ;-)
> ---
> drivers/mtd/spi-nor/winbond.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/winbond.c
> b/drivers/mtd/spi-nor/winbond.c index 96573f6..44f19f2 100644
> --- a/drivers/mtd/spi-nor/winbond.c
> +++ b/drivers/mtd/spi-nor/winbond.c
> @@ -100,6 +100,9 @@ static const struct flash_info winbond_parts[] = {
> SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
> { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
> SECT_4K | SPI_NOR_QUAD_READ |
> SPI_NOR_DUAL_READ) },
> + { "w25q512nw", INFO(0xef8020, 0, 64 * 1024, 1024,
> + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
> + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
I had a quick look. Though I'm no expert on this driver, I believe that the name should be "w25q512nwm", not "w25q512nw" (you need an "m"
at the end). Evidence:
The Winbond doc [1] shows:
W25Q512NW-IM is 0xef8020
W25Q512NW-IQ/IN is 0xef6020
Comparing to a different datasheet [2], I see that:
W25Q256JW-IM is 0xef8019
W25Q256JW is 0xef6019
Since "W25Q256JW-IM" is in code as "w25q256jwm" it implies to me that for the "-IM" suffix you just add a "m" to the end of the name.
[1] https://www.winbond.com/resource-files/W25Q512NW%20RevB%2007192021.pdf
[2] https://www.winbond.com/resource-files/W25Q256JW%20SPI%20RevJ%2003102021%20Plus.pdf
After changing the name, feel free to add my Reviewed-by (and please CC me on v3).
-Doug
Powered by blists - more mailing lists