linux-kernel - [RFC PATCH devicetree 06/10] arm64: dts: ls1088a: rename the "interrupt-map" of the extirq node to "fsl,extirq-map"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211214013800.2703568-7-vladimir.oltean@nxp.com>
Date:   Tue, 14 Dec 2021 03:37:56 +0200
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Cc:     Marc Zyngier <maz@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        Biwen Li <biwen.li@....com>,
        Zhiqiang Hou <Zhiqiang.Hou@....com>,
        Kurt Kanzenbach <kurt@...utronix.de>,
        Rasmus Villemoes <linux@...musvillemoes.dk>
Subject: [RFC PATCH devicetree 06/10] arm64: dts: ls1088a: rename the "interrupt-map" of the extirq node to "fsl,extirq-map"

In the discussions here:
https://lore.kernel.org/all/CAMuHMdXM34nNz1nfowNqDvdsdg+d69Bo3_ufs6fbcq65iYd5-A@mail.gmail.com/T/#m3449390080c5a0c8f59b8f8286a87e31e093b98b
Marc Zyngier points out that the ls-extirq driver should have never used
the "interrupt-map" keyword for mapping its channels to GIC interrupts.

This change modifies the device trees for the LS1088A to use a
driver-specific OF property for that purpose. The change is intended to
target stable kernels, to accelerate the conversion and ultimate removal
of the improperly used "interrupt-map" property.

Note that "interrupt-map-mask" isn't needed now (nor was it needed
before, it was just there to keep an apparent compatibility in form with
the reserved "interrupt-map" property). So delete it.

Fixes: 0e88b5fd565d ("arm64: dts: ls1088a: add DT node for external interrupt lines")
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 605072317243..53ecc25a24a2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -240,7 +240,7 @@ extirq: interrupt-controller@14 {
 				#address-cells = <0>;
 				interrupt-controller;
 				reg = <0x14 4>;
-				interrupt-map =
+				fsl,extirq-map =
 					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
@@ -253,7 +253,6 @@ extirq: interrupt-controller@14 {
 					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
 
-- 
2.25.1