| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1639562171-4434-3-git-send-email-xuyang2018.jy@fujitsu.com>
Date: Wed, 15 Dec 2021 17:56:11 +0800
From: Yang Xu <xuyang2018.jy@...itsu.com>
To: <linux-kselftest@...r.kernel.org>, <shuah@...nel.org>
CC: <linux-kernel@...r.kernel.org>, <naresh.kamboju@...aro.org>,
<aleksei.kodanev@...l-sw.com>, Yang Xu <xuyang2018.jy@...itsu.com>
Subject: [PATCH 3/3] selftests/zram: Adapt the situation that /dev/zram0 is being used
On some linux distributions, if it used /dev/zram0 as default by zram-generate
service, then this case will fail or report EBUSY.
To fix this, use hot_add/hot_remove interface. Also, move module check code into
zram_load from zram.sh. We can use /sys/class/zram-control to detect the
module whether existed.
After this patch, we still run case pass even /dev/zram0 is being used.
Signed-off-by: Yang Xu <xuyang2018.jy@...itsu.com>
---
tools/testing/selftests/zram/zram.sh | 16 +----
tools/testing/selftests/zram/zram01.sh | 2 +-
tools/testing/selftests/zram/zram_lib.sh | 75 ++++++++++++------------
3 files changed, 41 insertions(+), 52 deletions(-)
diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh
index 232e958ec454..d002171fe86f 100755
--- a/tools/testing/selftests/zram/zram.sh
+++ b/tools/testing/selftests/zram/zram.sh
@@ -2,9 +2,6 @@
# SPDX-License-Identifier: GPL-2.0
TCID="zram.sh"
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
. ./zram_lib.sh
run_zram () {
@@ -17,15 +14,4 @@ echo ""
}
check_prereqs
-
-# check zram module exists
-MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
-if [ -f $MODULE_PATH ]; then
- run_zram
-elif [ -b /dev/zram0 ]; then
- run_zram
-else
- echo "$TCID : No zram.ko module or /dev/zram0 device file not found"
- echo "$TCID : CONFIG_ZRAM is not set"
- exit $ksft_skip
-fi
+run_zram
diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
index e083a4c628a8..f87cc1ebf20f 100755
--- a/tools/testing/selftests/zram/zram01.sh
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -30,7 +30,7 @@ zram_algs="lzo"
zram_fill_fs()
{
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo "fill zram$i..."
local b=0
while [ true ]; do
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
index 0c49f9d1d563..ee57990c322d 100755
--- a/tools/testing/selftests/zram/zram_lib.sh
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -8,6 +8,8 @@
MODULE=0
dev_makeswap=-1
dev_mounted=-1
+dev_start=-1
+dev_end=-1
# Kselftest framework requirement - SKIP code is 4.
ksft_skip=4
@@ -29,19 +31,22 @@ zram_cleanup()
{
echo "zram cleanup"
local i=
- for i in $(seq 0 $dev_makeswap); do
+ for i in $(seq $dev_start $dev_makeswap); do
swapoff /dev/zram$i
done
- for i in $(seq 0 $dev_mounted); do
+ for i in $(seq $dev_start $dev_mounted); do
umount /dev/zram$i
done
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo 1 > /sys/block/zram${i}/reset
- rm -rf zram$i
+ rm -rf zram${i}
done
+ for i in $(seq $dev_start $dev_end); do
+ echo $i > /sys/class/zram-control/hot_remove
+ done
}
zram_unload()
@@ -54,32 +59,30 @@ zram_unload()
zram_load()
{
- # check zram module exists
- MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko
- if [ -f $MODULE_PATH ]; then
- MODULE=1
- echo "create '$dev_num' zram device(s)"
+ echo "create '$dev_num' zram device(s)"
+
+ if [ ! -d "/sys/class/zram-control" ]; then
modprobe zram num_devices=$dev_num
- if [ $? -ne 0 ]; then
- echo "failed to insert zram module"
- exit 1
+ if grep -q '^zram' /proc/modules; then
+ echo "ERROR: No zram.ko module"
+ echo "$TCID : CONFIG_ZRAM is not set"
+ exit $ksft_skip
fi
+ MODULE=1
+ dev_start=0
+ dev_end=$(($dev_num - 1))
+ echo "all zram devices(/dev/zram0~$dev_end) successfully created"
+ return
+ fi
- dev_num_created=$(ls /dev/zram* | wc -w)
+ dev_start=$(ls /dev/zram* | wc -w)
+ dev_end=$(($dev_start + $dev_num - 1))
- if [ "$dev_num_created" -ne "$dev_num" ]; then
- echo "unexpected num of devices: $dev_num_created"
- ERR_CODE=-1
- else
- echo "zram load module successful"
- fi
- elif [ -b /dev/zram0 ]; then
- echo "/dev/zram0 device file found: OK"
- else
- echo "ERROR: No zram.ko module or no /dev/zram0 device found"
- echo "$TCID : CONFIG_ZRAM is not set"
- exit 1
- fi
+ for i in $(seq $dev_start $dev_end); do
+ cat /sys/class/zram-control/hot_add > /dev/null
+ done
+
+ echo "all zram devices(/dev/zram$dev_start~$dev_end) successfully created"
}
zram_compress_alg()
@@ -88,13 +91,13 @@ zram_compress_alg()
local algs=$(cat /sys/block/zram0/comp_algorithm)
echo "supported algs: $algs"
- local i=0
+ local i=$dev_start
for alg in $zram_algs; do
local sys_path="/sys/block/zram${i}/comp_algorithm"
echo "$alg" > $sys_path || \
echo "FAIL can't set '$alg' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$alg' ($i/$dev_num)"
+ echo "$sys_path = '$alg'"
done
echo "zram set compression algorithm: OK"
@@ -103,14 +106,14 @@ zram_compress_alg()
zram_set_disksizes()
{
echo "set disk size to zram device(s)"
- local i=0
+ local i=$dev_start
for ds in $zram_sizes; do
local sys_path="/sys/block/zram${i}/disksize"
echo "$ds" > $sys_path || \
echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$ds' ($i/$dev_num)"
+ echo "$sys_path = '$ds'"
done
echo "zram set disksizes: OK"
@@ -120,14 +123,14 @@ zram_set_memlimit()
{
echo "set memory limit to zram device(s)"
- local i=0
+ local i=$dev_start
for ds in $zram_mem_limits; do
local sys_path="/sys/block/zram${i}/mem_limit"
echo "$ds" > $sys_path || \
echo "FAIL can't set '$ds' to $sys_path"
i=$(($i + 1))
- echo "$sys_path = '$ds' ($i/$dev_num)"
+ echo "$sys_path = '$ds'"
done
echo "zram set memory limit: OK"
@@ -137,7 +140,7 @@ zram_makeswap()
{
echo "make swap with zram device(s)"
local i=0
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
mkswap /dev/zram$i > err.log 2>&1
if [ $? -ne 0 ]; then
cat err.log
@@ -160,7 +163,7 @@ zram_makeswap()
zram_swapoff()
{
local i=
- for i in $(seq 0 $dev_makeswap); do
+ for i in $(seq $dev_start $dev_makeswap); do
swapoff /dev/zram$i > err.log 2>&1
if [ $? -ne 0 ]; then
cat err.log
@@ -174,7 +177,7 @@ zram_swapoff()
zram_makefs()
{
- local i=0
+ local i=$dev_start
for fs in $zram_filesystems; do
# if requested fs not supported default it to ext2
which mkfs.$fs > /dev/null 2>&1 || fs=ext2
@@ -193,7 +196,7 @@ zram_makefs()
zram_mount()
{
local i=0
- for i in $(seq 0 $(($dev_num - 1))); do
+ for i in $(seq $dev_start $dev_end); do
echo "mount /dev/zram$i"
mkdir zram$i
mount /dev/zram$i zram$i > /dev/null || \
--
2.23.0
Powered by blists - more mailing lists