[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211215160906.17451-1-semen.protsenko@linaro.org>
Date: Wed, 15 Dec 2021 18:08:59 +0200
From: Sam Protsenko <semen.protsenko@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Rob Herring <robh+dt@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>
Cc: Jaewon Kim <jaewon02.kim@...sung.com>,
Chanho Park <chanho61.park@...sung.com>,
David Virag <virag.david003@...il.com>,
Youngmin Nam <youngmin.nam@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Daniel Palmer <daniel@...f.com>,
Hao Fang <fanghao11@...wei.com>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: [PATCH 0/7] arm64: dts: exynos: Add E850-96 board support
WinLink's E850-96 is a dev board based on Exynos850 SoC [1]. The board's
design follows 96boards specifications, hence it's compatible with
96boards mezzanines [2].
This patch series adds the initial support for E850-96 board and
Exynos850 SoC, along with corresponding bindings. Only basic platform
components are enabled at the moment (like serial, I2C, eMMC, RTC, WDT,
clock driver, etc). Right now with this patch series it's possible to
run the kernel with BusyBox rootfs as a RAM disk. More features are
coming soon.
[1] https://www.samsung.com/semiconductor/minisite/exynos/products/mobileprocessor/exynos-850/
[2] https://www.96boards.org/products/mezzanine/
Sam Protsenko (7):
dt-bindings: clock: exynos850: Add bindings for Exynos850 sysreg
clocks
clk: samsung: exynos850: Add missing sysreg clocks
dt-bindings: Add vendor prefix for WinLink
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
arm64: dts: exynos: Add initial Exynos850 SoC support
arm64: dts: exynos: Add initial E850-96 board support
.../bindings/arm/samsung/samsung-boards.yaml | 6 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/exynos/Makefile | 3 +-
.../boot/dts/exynos/exynos850-e850-96.dts | 157 ++++
.../boot/dts/exynos/exynos850-pinctrl.dtsi | 755 ++++++++++++++++++
arch/arm64/boot/dts/exynos/exynos850.dtsi | 755 ++++++++++++++++++
drivers/clk/samsung/clk-exynos850.c | 29 +
include/dt-bindings/clock/exynos850.h | 12 +-
include/dt-bindings/pinctrl/samsung.h | 13 +-
9 files changed, 1727 insertions(+), 5 deletions(-)
create mode 100644 arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi
--
2.30.2
Powered by blists - more mailing lists