[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20211216121356.GM4216@dragon>
Date: Thu, 16 Dec 2021 20:13:56 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Adam Ford <aford173@...il.com>
Cc: linux-arm-kernel@...ts.infradead.org, tharvey@...eworks.com,
aford@...conembedded.com, michael@...rulasolutions.com,
jagan@...rulasolutions.com, Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Lucas Stach <l.stach@...gutronix.de>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH V5 0/9] arm64: imx8mn: Enable more imx8m Nano functions
On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote:
> The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> different in others. With the blk-ctrl driver for Mini in place,
> this series expands the blk-ctrl driver to support the Nano which
> opens the door for additional functions in the future. As part of
> this series, it also addresses some issues in the GPCv2 driver and
> finally adds support for enabling USB and GPU.
>
> V5: Clean up the GPU clock assignments.
> V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
> and add the same fixes for CSI and DSI to the Nano
> V3: Fixes an the yaml example
> V2: Fixes the clock count in the blk-ctrl
>
> [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html
>
> Adam Ford (9):
> soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
> soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
> dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
> dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
> soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
> arm64: dts: imx8mn: add GPC node
> arm64: dts: imx8mn: put USB controller into power-domains
> arm64: dts: imx8mn: add DISP blk-ctrl
> arm64: dts: imx8mn: Enable GPU
Applied all, thanks!
Powered by blists - more mailing lists