linux-kernel - Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <a23b0cbb5f1b0d2b2724ddb0e032f2caeedc775f.camel@mediatek.com>
Date:   Fri, 17 Dec 2021 18:13:51 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        <gregkh@...uxfoundation.org>
CC:     <stern@...land.harvard.edu>, <mathias.nyman@...ux.intel.com>,
        Thinh Nguyen <Thinh.Nguyen@...opsys.com>,
        Chris Chiu <chris.chiu@...onical.com>,
        "Bixuan Cui" <cuibixuan@...wei.com>,
        Rajat Jain <rajatja@...gle.com>, <linux-usb@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] usb: hub: Add delay for SuperSpeed hub resume to let
 links transit to U0

On Wed, 2021-12-15 at 20:01 +0800, Kai-Heng Feng wrote:
> When a new USB device gets plugged to nested hubs, the affected hub,
> which connects to usb 2-1.4-port2, doesn't report there's any change,
> hence the nested hubs go back to runtime suspend like nothing
> happened:
> [  281.032951] usb usb2: usb wakeup-resume
> [  281.032959] usb usb2: usb auto-resume
> [  281.032974] hub 2-0:1.0: hub_resume
> [  281.033011] usb usb2-port1: status 0263 change 0000
> [  281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
> [  281.049797] usb 2-1: usb wakeup-resume
> [  281.069800] usb 2-1: Waited 0ms for CONNECT
> [  281.069810] usb 2-1: finish resume
> [  281.070026] hub 2-1:1.0: hub_resume
> [  281.070250] usb 2-1-port4: status 0203 change 0000
> [  281.070272] usb usb2-port1: resume, status 0
> [  281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
> [  281.089813] usb 2-1.4: usb wakeup-resume
> [  281.109792] usb 2-1.4: Waited 0ms for CONNECT
> [  281.109801] usb 2-1.4: finish resume
> [  281.109991] hub 2-1.4:1.0: hub_resume
> [  281.110147] usb 2-1.4-port2: status 0263 change 0000
> [  281.110234] usb 2-1-port4: resume, status 0
> [  281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
> [  281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
> [  281.110426] hub 2-1.4:1.0: hub_suspend
> [  281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
> [  281.130998] hub 2-1:1.0: hub_suspend
> [  281.137788] usb 2-1: usb auto-suspend, wakeup 1
> [  281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
> [  281.177828] usb 2-1: usb wakeup-resume
> [  281.197839] usb 2-1: Waited 0ms for CONNECT
> [  281.197850] usb 2-1: finish resume
> [  281.197984] hub 2-1:1.0: hub_resume
> [  281.198203] usb 2-1-port4: status 0203 change 0000
> [  281.198228] usb usb2-port1: resume, status 0
> [  281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
> [  281.217835] usb 2-1.4: usb wakeup-resume
> [  281.237834] usb 2-1.4: Waited 0ms for CONNECT
> [  281.237845] usb 2-1.4: finish resume
> [  281.237990] hub 2-1.4:1.0: hub_resume
> [  281.238067] usb 2-1.4-port2: status 0263 change 0000
> [  281.238148] usb 2-1-port4: resume, status 0
> [  281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
> [  281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
> [  281.238385] hub 2-1.4:1.0: hub_suspend
> [  281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
> [  281.258076] hub 2-1:1.0: hub_suspend
> [  281.265744] usb 2-1: usb auto-suspend, wakeup 1
> [  281.285976] hub 2-0:1.0: hub_suspend
> [  281.285988] usb usb2: bus auto-suspend, wakeup 1
> 
> USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
> the link is in a non-U0 state, then the device must transition the
> link
> to U0 prior to sending the remote wake message", but the hub only
> transits the link to U0 after signaling remote wakeup.
> 
> So be more forgiving and use a 20ms delay to let the link transit to
> U0
> for remote wakeup.
> 
> Suggested-by: Alan Stern <stern@...land.harvard.edu>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> ---
> v2:
>  - Add a small delay instead of waking up all hubs.
> 
>  drivers/usb/core/hub.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 00070a8a65079..576fdf2c9f3c8 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -1110,7 +1110,10 @@ static void hub_activate(struct usb_hub *hub,
> enum hub_activation_type type)
>  		} else {
>  			hub_power_on(hub, true);
>  		}
> -	}
> +	/* Give some time on remote wakeup to let links to transit to
> U0 */
> +	} else if (hub_is_superspeed(hub->hdev))
> +		msleep(20);
add {}?

> +
>   init2:
>  
>  	/*