linux-kernel - [PATCH v2 1/2] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20211217134150.497731-1-tudor.ambarus@microchip.com>
Date:   Fri, 17 Dec 2021 15:41:49 +0200
From:   Tudor Ambarus <tudor.ambarus@...rochip.com>
To:     <p.yadav@...com>, <michael@...le.cc>
CC:     <miquel.raynal@...tlin.com>, <richard@....at>, <vigneshr@...com>,
        <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        "Tudor Ambarus" <tudor.ambarus@...rochip.com>
Subject: [PATCH v2 1/2] mtd: spi-nor: core: Introduce SPI_NOR_SOFT_RESET flash_info fixup_flag

The Soft Reset and Rescue Sequence Support is defined in BFPT_DWORD(16)
starting with JESD216A. The first version of SFDP, JESD216 (April 2011),
defines just the first 9 BFPT DWORDS, thus it does not contain information
about the Software Reset and Rescue Support. Since this support can not
be discovered by parsing the first SFDP version, introduce a flash_info
fixup_flag that will be used either by flashes that define
JESD216 (April 2011) or by flashes that do not define SFDP at all.
In case a flash defines BFPT_DWORD(16) but with wrong values, one should
instead use a post_bfpt() hook and set SNOR_F_SOFT_RESET.

Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
Reviewed-by: Pratyush Yadav <p.yadav@...com>
---
v2: collect R-b

 drivers/mtd/spi-nor/core.c | 3 +++
 drivers/mtd/spi-nor/core.h | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 2e21d5ac0e2d..32d80fdaa2a2 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2699,6 +2699,9 @@ static void spi_nor_init_fixup_flags(struct spi_nor *nor)
 
 	if (fixup_flags & SPI_NOR_IO_MODE_EN_VOLATILE)
 		nor->flags |= SNOR_F_IO_MODE_EN_VOLATILE;
+
+	if (fixup_flags & SPI_NOR_SOFT_RESET)
+		nor->flags |= SNOR_F_SOFT_RESET;
 }
 
 /**
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 2afb610853a9..70c6bb7f5f04 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -373,6 +373,8 @@ struct spi_nor_fixups {
  *                            memory size above 128Mib.
  *   SPI_NOR_IO_MODE_EN_VOLATILE: flash enables the best available I/O mode
  *                            via a volatile bit.
+ *   SPI_NOR_SOFT_RESET:      flash supports software reset enable, reset
+ *                            sequence.
  * @mfr_flags:      manufacturer private flags. Used in the manufacturer fixup
  *                  hooks to differentiate support between flashes of the same
  *                  manufacturer.
@@ -416,6 +418,7 @@ struct flash_info {
 	u8 fixup_flags;
 #define SPI_NOR_4B_OPCODES		BIT(0)
 #define SPI_NOR_IO_MODE_EN_VOLATILE	BIT(1)
+#define SPI_NOR_SOFT_RESET		BIT(2)
 
 	u8 mfr_flags;
 
-- 
2.25.1