[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <88ff0e3e-6709-68fc-88cb-f915dfddbe86@canonical.com>
Date: Fri, 17 Dec 2021 16:21:57 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Roger Quadros <rogerq@...nel.org>, tony@...mide.com
Cc: robh@...nel.org, kishon@...com, nm@...com, vigneshr@...com,
linux-omap@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v3 3/4] memory: omap-gpmc: Use a compatible match table
when checking for NAND controller
On 17/12/2021 11:29, Roger Quadros wrote:
> As more compatibles can be added to the GPMC NAND controller driver
> use a compatible match table.
>
> Signed-off-by: Roger Quadros <rogerq@...nel.org>
> ---
> drivers/memory/omap-gpmc.c | 8 +++++++-
> drivers/mtd/nand/raw/omap2.c | 2 +-
> include/linux/platform_data/mtd-nand-omap2.h | 5 +++++
> 3 files changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
> index 624153048182..814ddb45c13d 100644
> --- a/drivers/memory/omap-gpmc.c
> +++ b/drivers/memory/omap-gpmc.c
> @@ -2091,6 +2091,7 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
> u32 val;
> struct gpio_desc *waitpin_desc = NULL;
> struct gpmc_device *gpmc = platform_get_drvdata(pdev);
> + bool is_nand = false;
>
> if (of_property_read_u32(child, "reg", &cs) < 0) {
> dev_err(&pdev->dev, "%pOF has no 'reg' property\n",
> @@ -2183,7 +2184,12 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
> }
> }
>
> - if (of_device_is_compatible(child, "ti,omap2-nand")) {
> +#if defined(CONFIG_MTD_NAND_OMAP2)
if (IS_ENABLED()) is preferred. If needed, you could make omap_nand_ids
symbol visible always (so without ifdef around it), because extern
structure should not have impact when not defined (if I recall
correctly...).
> + if (of_match_node(omap_nand_ids, child))
> + is_nand = true;
> +#endif
> +
> + if (is_nand) {
> /* NAND specific setup */
> val = 8;
> of_property_read_u32(child, "nand-bus-width", &val);
> diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
> index b26d4947af02..fff834ee726f 100644
> --- a/drivers/mtd/nand/raw/omap2.c
> +++ b/drivers/mtd/nand/raw/omap2.c
> @@ -2352,7 +2352,7 @@ static int omap_nand_remove(struct platform_device *pdev)
> return ret;
> }
>
> -static const struct of_device_id omap_nand_ids[] = {
> +const struct of_device_id omap_nand_ids[] = {
> { .compatible = "ti,omap2-nand", },
> {},
> };
I think OMAP2 NAND driver can be a module, so this should have
EXPORT_SYMBOL.
> diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
> index de6ada739121..e1bb90a8db03 100644
> --- a/include/linux/platform_data/mtd-nand-omap2.h
> +++ b/include/linux/platform_data/mtd-nand-omap2.h
> @@ -61,4 +61,9 @@ struct gpmc_nand_regs {
> void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
> void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
> };
> +
> +#if defined(CONFIG_MTD_NAND_OMAP2)
> +extern const struct of_device_id omap_nand_ids[];
> +#endif
> +
> #endif
>
Best regards,
Krzysztof
Powered by blists - more mailing lists