[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20211217161549.24836-7-semen.protsenko@linaro.org>
Date: Fri, 17 Dec 2021 18:15:48 +0200
From: Sam Protsenko <semen.protsenko@...aro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Rob Herring <robh+dt@...nel.org>,
Sylwester Nawrocki <s.nawrocki@...sung.com>
Cc: Jaewon Kim <jaewon02.kim@...sung.com>,
Chanho Park <chanho61.park@...sung.com>,
David Virag <virag.david003@...il.com>,
Youngmin Nam <youngmin.nam@...sung.com>,
Tomasz Figa <tomasz.figa@...il.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Daniel Palmer <daniel@...f.com>,
Hao Fang <fanghao11@...wei.com>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org
Subject: [PATCH v4 6/7] arm64: dts: exynos: Add initial Exynos850 SoC support
Samsung Exynos850 is ARMv8-based mobile-oriented SoC. This patch adds
initial SoC support. It's not comprehensive yet, some more devices will
be added later. Right now only crucial system components and most needed
platform devices are defined.
Crucial features (needed to boot Linux up to shell with serial console):
* Octa cores (Cortex-A55), supporting PSCI v1.0
* ARM architected timer (armv8-timer)
* Interrupt controller (GIC-400)
* Pinctrl nodes for GPIO
* Serial node
Basic platform features:
* Clock controller CMUs
* OSCCLK clock
* MCT timer
* ARM PMU (Performance Monitor Unit)
* Chip-id
* RTC
* Reset
* Watchdog timers
* eMMC
* I2C
* HSI2C
* USI
All those features were already enabled and tested on E850-96 board with
minimal BusyBox rootfs.
Reviewed-by: Chanho Park <chanho61.park@...sung.com>
Signed-off-by: Sam Protsenko <semen.protsenko@...aro.org>
---
Changes in v4:
- Removed fast slew rate nodes from pinctrl dtsi
- Added R-b tag by Chanho Park
- Moved "rtcclk" clock to board dts file
- Specified "rtc_src" clock for rtc node in board dts file
- Specified "rtcclk" clock for cmu_hsi node in board dts file
Changes in v3:
- (none)
Changes in v2:
- Merged spi*_cs_func_pins nodes (Chip Select pin) into spi*_pins
nodes
- Removed spi*_cs_pins nodes (GPIO configuration for SPI CS pins)
- Sorted pinctrl_peri "pins" nodes by name
- Removed USI aliases
- Added TODO comment for RTC clock (needs to be implemented in PMIC)
- Sorted cmu nodes by unit address
- Sorted pinctrl nodes by unit address
.../boot/dts/exynos/exynos850-pinctrl.dtsi | 643 +++++++++++++++
arch/arm64/boot/dts/exynos/exynos850.dtsi | 741 ++++++++++++++++++
2 files changed, 1384 insertions(+)
create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
new file mode 100644
index 000000000000..f576b29c9b16
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (C) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_alive {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa3: gpa3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpa4: gpa4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpq0: gpq0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* I2C5 (also called CAM_PMIC_I2C in TRM) */
+ i2c5_pins: i2c5-pins {
+ samsung,pins = "gpa3-5", "gpa3-6";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* I2C6 (also called MOTOR_I2C in TRM) */
+ i2c6_pins: i2c6-pins {
+ samsung,pins = "gpa3-7", "gpa4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI: UART_DEBUG_0 pins */
+ uart0_pins: uart0-pins {
+ samsung,pins = "gpq0-0", "gpq0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI: UART_DEBUG_1 pins */
+ uart1_pins: uart1-pins {
+ samsung,pins = "gpa3-7", "gpa4-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
+&pinctrl_cmgp {
+ gpm0: gpm0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm1: gpm1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm2: gpm2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm3: gpm3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm4: gpm4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ gpm5: gpm5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* USI_CMGP0: HSI2C function */
+ hsi2c3_pins: hsi2c3-pins {
+ samsung,pins = "gpm0-0", "gpm1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
+ uart1_single_pins: uart1-single-pins {
+ samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
+ uart1_dual_pins: uart1-dual-pins {
+ samsung,pins = "gpm0-0", "gpm1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP0: SPI function */
+ spi1_pins: spi1-pins {
+ samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI_CMGP1: HSI2C function */
+ hsi2c4_pins: hsi2c4-pins {
+ samsung,pins = "gpm4-0", "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
+ uart2_single_pins: uart2-single-pins {
+ samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
+ uart2_dual_pins: uart2-dual-pins {
+ samsung,pins = "gpm4-0", "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
+ /* USI_CMGP1: SPI function */
+ spi2_pins: spi2-pins {
+ samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
+&pinctrl_aud {
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ aud_codec_mclk_pins: aud-codec-mclk-pins {
+ samsung,pins = "gpb0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
+ samsung,pins = "gpb0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s0_pins: aud-i2s0-pins {
+ samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s0_idle_pins: aud-i2s0-idle-pins {
+ samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s1_pins: aud-i2s1-pins {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_i2s1_idle_pins: aud-i2s1-idle-pins {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_fm_pins: aud-fm-pins {
+ samsung,pins = "gpb1-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+
+ aud_fm_idle_pins: aud-fm-idle-pins {
+ samsung,pins = "gpb1-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_hsi {
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd2_clk_pins: sd2-clk-pins {
+ samsung,pins = "gpf2-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+ };
+
+ sd2_cmd_pins: sd2-cmd-pins {
+ samsung,pins = "gpf2-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+ };
+
+ sd2_bus1_pins: sd2-bus1-pins {
+ samsung,pins = "gpf2-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+ };
+
+ sd2_bus4_pins: sd2-bus4-pins {
+ samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+ };
+
+ sd2_pdn_pins: sd2-pdn-pins {
+ samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+ "gpf2-4", "gpf2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ };
+};
+
+&pinctrl_core {
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk_pins: sd0-clk-pins {
+ samsung,pins = "gpf0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_cmd_pins: sd0-cmd-pins {
+ samsung,pins = "gpf0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_rdqs_pins: sd0-rdqs-pins {
+ samsung,pins = "gpf0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_nreset_pins: sd0-nreset-pins {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_bus1_pins: sd0-bus1-pins {
+ samsung,pins = "gpf1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_bus4_pins: sd0-bus4-pins {
+ samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
+ sd0_bus8_pins: sd0-bus8-pins {
+ samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+};
+
+&pinctrl_peri {
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg0: gpg0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg1: gpg1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg2: gpg2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpg3: gpg3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp0: gpp0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpp1: gpp1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpp2: gpp2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sensor_mclk0_in_pins: sensor-mclk0-in-pins {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk0_out_pins: sensor-mclk0-out-pins {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk1_in_pins: sensor-mclk1-in-pins {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk1_out_pins: sensor-mclk1-out-pins {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk2_in_pins: sensor-mclk2-in-pins {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk2_out_pins: sensor-mclk2-out-pins {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+ };
+
+ /* USI: HSI2C0 */
+ hsi2c0_pins: hsi2c0-pins {
+ samsung,pins = "gpc1-0", "gpc1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI: HSI2C1 */
+ hsi2c1_pins: hsi2c1-pins {
+ samsung,pins = "gpc1-2", "gpc1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI: HSI2C2 */
+ hsi2c2_pins: hsi2c2-pins {
+ samsung,pins = "gpc1-4", "gpc1-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ /* USI: SPI */
+ spi0_pins: spi0-pins {
+ samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ samsung,pins = "gpp0-0", "gpp0-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ i2c1_pins: i2c1-pins {
+ samsung,pins = "gpp0-2", "gpp0-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ i2c2_pins: i2c2-pins {
+ samsung,pins = "gpp0-4", "gpp0-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ i2c3_pins: i2c3-pins {
+ samsung,pins = "gpp1-0", "gpp1-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ i2c4_pins: i2c4-pins {
+ samsung,pins = "gpp1-2", "gpp1-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ xclkout_pins: xclkout-pins {
+ samsung,pins = "gpq0-2";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
new file mode 100644
index 000000000000..c9457593f6cc
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos850 SoC device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung Exynos850 SoC device nodes are listed in this file.
+ * Exynos850 based board files can include this file and provide
+ * values for board specific bindings.
+ */
+
+#include <dt-bindings/clock/exynos850.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+ /* Also known under engineering name Exynos3830 */
+ compatible = "samsung,exynos850";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_alive;
+ pinctrl1 = &pinctrl_cmgp;
+ pinctrl2 = &pinctrl_aud;
+ pinctrl3 = &pinctrl_hsi;
+ pinctrl4 = &pinctrl_core;
+ pinctrl5 = &pinctrl_peri;
+ mmc0 = &mmc_0;
+ serial0 = &serial_0;
+ serial1 = &serial_1;
+ serial2 = &serial_2;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &hsi2c_0;
+ i2c8 = &hsi2c_1;
+ i2c9 = &hsi2c_2;
+ i2c10 = &hsi2c_3;
+ i2c11 = &hsi2c_4;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a55-pmu";
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ /* Main system clock (XTCXO); external, must be 26 MHz */
+ oscclk: clock-oscclk {
+ compatible = "fixed-clock";
+ clock-output-names = "oscclk";
+ #clock-cells = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ };
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x101>;
+ enable-method = "psci";
+ };
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x102>;
+ enable-method = "psci";
+ };
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ /* Hypervisor Virtual Timer interrupt is not wired to GIC */
+ interrupts =
+ <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc: soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x20000000>;
+
+ chipid@...00000 {
+ compatible = "samsung,exynos850-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ timer@...40000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10040000 0x800>;
+ interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
+ clock-names = "fin_pll", "mct";
+ };
+
+ gic: interrupt-controller@...01000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ reg = <0x12a01000 0x1000>,
+ <0x12a02000 0x2000>,
+ <0x12a04000 0x2000>,
+ <0x12a06000 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pmu_system_controller: system-controller@...60000 {
+ compatible = "samsung,exynos850-pmu", "syscon";
+ reg = <0x11860000 0x10000>;
+ clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>;
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pmu_system_controller>;
+ offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+ mask = <0x2>; /* SWRESET_SYSTEM */
+ value = <0x2>; /* reset value */
+ };
+ };
+
+ watchdog_cl0: watchdog@...50000 {
+ compatible = "samsung,exynos850-wdt";
+ reg = <0x10050000 0x100>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <0>;
+ status = "disabled";
+ };
+
+ watchdog_cl1: watchdog@...60000 {
+ compatible = "samsung,exynos850-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
+ clock-names = "watchdog", "watchdog_src";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ samsung,cluster-index = <1>;
+ status = "disabled";
+ };
+
+ cmu_peri: clock-controller@...30000 {
+ compatible = "samsung,exynos850-cmu-peri";
+ reg = <0x10030000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+ <&cmu_top CLK_DOUT_PERI_UART>,
+ <&cmu_top CLK_DOUT_PERI_IP>;
+ clock-names = "oscclk", "dout_peri_bus",
+ "dout_peri_uart", "dout_peri_ip";
+ };
+
+ cmu_apm: clock-controller@...00000 {
+ compatible = "samsung,exynos850-cmu-apm";
+ reg = <0x11800000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
+ clock-names = "oscclk", "dout_clkcmu_apm_bus";
+ };
+
+ cmu_cmgp: clock-controller@...00000 {
+ compatible = "samsung,exynos850-cmu-cmgp";
+ reg = <0x11c00000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
+ clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
+ };
+
+ cmu_core: clock-controller@...00000 {
+ compatible = "samsung,exynos850-cmu-core";
+ reg = <0x12000000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
+ <&cmu_top CLK_DOUT_CORE_CCI>,
+ <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
+ <&cmu_top CLK_DOUT_CORE_SSS>;
+ clock-names = "oscclk", "dout_core_bus",
+ "dout_core_cci", "dout_core_mmc_embd",
+ "dout_core_sss";
+ };
+
+ cmu_top: clock-controller@...e0000 {
+ compatible = "samsung,exynos850-cmu-top";
+ reg = <0x120e0000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>;
+ clock-names = "oscclk";
+ };
+
+ cmu_dpu: clock-controller@...00000 {
+ compatible = "samsung,exynos850-cmu-dpu";
+ reg = <0x13000000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
+ clock-names = "oscclk", "dout_dpu";
+ };
+
+ cmu_hsi: clock-controller@...00000 {
+ compatible = "samsung,exynos850-cmu-hsi";
+ reg = <0x13400000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLK_DOUT_HSI_BUS>,
+ <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+ <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+ clock-names = "oscclk", "dout_hsi_bus",
+ "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+ };
+
+ pinctrl_alive: pinctrl@...50000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x11850000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_cmgp: pinctrl@...30000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x11c30000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ };
+ };
+
+ pinctrl_core: pinctrl@...70000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x12070000 0x1000>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_hsi: pinctrl@...30000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x13430000 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_peri: pinctrl@...b0000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x139b0000 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pinctrl_aud: pinctrl@...60000 {
+ compatible = "samsung,exynos850-pinctrl";
+ reg = <0x14a60000 0x1000>;
+ };
+
+ rtc: rtc@...30000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x11a30000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
+ clock-names = "rtc";
+ status = "disabled";
+ };
+
+ mmc_0: mmc@...00000 {
+ compatible = "samsung,exynos7-dw-mshc-smu";
+ reg = <0x12100000 0x2000>;
+ interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
+ <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ i2c_0: i2c@...30000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13830000 0x100>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c_1: i2c@...40000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13840000 0x100>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c_2: i2c@...50000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13850000 0x100>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c_3: i2c@...60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ i2c_4: i2c@...70000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ /* I2C_5 (also called CAM_PMIC_I2C in TRM) */
+ i2c_5: i2c@...80000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ /* I2C_6 (also called MOTOR_I2C in TRM) */
+ i2c_6: i2c@...90000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+ clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
+
+ sysreg_peri: syscon@...20000 {
+ compatible = "samsung,exynos850-sysreg", "syscon";
+ reg = <0x10020000 0x10000>;
+ clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
+ };
+
+ sysreg_cmgp: syscon@...20000 {
+ compatible = "samsung,exynos850-sysreg", "syscon";
+ reg = <0x11c20000 0x10000>;
+ clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
+ };
+
+ usi_uart: usi@...200c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x138200c0 0x20>;
+ samsung,sysreg = <&sysreg_peri 0x1010>;
+ samsung,mode = <USI_V2_UART>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+ <&cmu_peri CLK_GOUT_UART_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ serial_0: serial@...20000 {
+ compatible = "samsung,exynos850-uart";
+ reg = <0x13820000 0xc0>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+ <&cmu_peri CLK_GOUT_UART_IPCLK>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+ };
+
+ usi_hsi2c_0: usi@...a00c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x138a00c0 0x20>;
+ samsung,sysreg = <&sysreg_peri 0x1020>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_0: i2c@...a0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x138a0000 0xc0>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c0_pins>;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ status = "disabled";
+ };
+ };
+
+ usi_hsi2c_1: usi@...b00c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x138b00c0 0x20>;
+ samsung,sysreg = <&sysreg_peri 0x1030>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_1: i2c@...b0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x138b0000 0xc0>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c1_pins>;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ status = "disabled";
+ };
+ };
+
+ usi_hsi2c_2: usi@...c00c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x138c00c0 0x20>;
+ samsung,sysreg = <&sysreg_peri 0x1040>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_2: i2c@...c0000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x138c0000 0xc0>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c2_pins>;
+ clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+ <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ status = "disabled";
+ };
+ };
+
+ usi_spi_0: usi@...400c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x139400c0 0x20>;
+ samsung,sysreg = <&sysreg_peri 0x1050>;
+ samsung,mode = <USI_V2_SPI>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+ <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+ };
+
+ usi_cmgp0: usi@...000c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x11d000c0 0x20>;
+ samsung,sysreg = <&sysreg_cmgp 0x2000>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_3: i2c@...00000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x11d00000 0xc0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c3_pins>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ status = "disabled";
+ };
+
+ serial_1: serial@...00000 {
+ compatible = "samsung,exynos850-uart";
+ reg = <0x11d00000 0xc0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_single_pins>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+ };
+
+ usi_cmgp1: usi@...200c0 {
+ compatible = "samsung,exynos850-usi";
+ reg = <0x11d200c0 0x20>;
+ samsung,sysreg = <&sysreg_cmgp 0x2010>;
+ samsung,mode = <USI_V2_I2C>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+ clock-names = "pclk", "ipclk";
+ status = "disabled";
+
+ hsi2c_4: i2c@...20000 {
+ compatible = "samsung,exynosautov9-hsi2c";
+ reg = <0x11d20000 0xc0>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsi2c4_pins>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
+ clock-names = "hsi2c", "hsi2c_pclk";
+ status = "disabled";
+ };
+
+ serial_2: serial@...20000 {
+ compatible = "samsung,exynos850-uart";
+ reg = <0x11d20000 0xc0>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_single_pins>;
+ clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+ <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+ };
+ };
+};
+
+#include "exynos850-pinctrl.dtsi"
--
2.30.2
Powered by blists - more mailing lists