[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CA+V-a8ta2Bpp=3dwc2tB-Np+whGqg=92E4pRLp=a7KzwCGAz=w@mail.gmail.com>
Date: Fri, 17 Dec 2021 16:41:36 +0000
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Rob Herring <robh+dt@...nel.org>
Cc: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>,
Damien Le Moal <damien.lemoal@...nsource.wdc.com>,
"open list:LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)"
<linux-ide@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 2/2] ata: pata_platform: Merge pata_of_platform into pata_platform
Hi Rob,
On Fri, Dec 17, 2021 at 2:50 PM Rob Herring <robh+dt@...nel.org> wrote:
>
> On Fri, Dec 17, 2021 at 8:17 AM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@...renesas.com> wrote:
> >
> > Merge the OF pata_of_platform driver into pata_platform.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> > drivers/ata/Kconfig | 3 +-
> > drivers/ata/Makefile | 1 -
> > drivers/ata/pata_of_platform.c | 90 ---------------
> > drivers/ata/pata_platform.c | 199 +++++++++++++++++++++++++--------
> > include/linux/ata_platform.h | 9 --
> > 5 files changed, 153 insertions(+), 149 deletions(-)
> > delete mode 100644 drivers/ata/pata_of_platform.c
> >
> > diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> > index a7da8ea7b3ed..0fab5cae45d5 100644
> > --- a/drivers/ata/Kconfig
> > +++ b/drivers/ata/Kconfig
> > @@ -1122,7 +1122,8 @@ config PATA_PLATFORM
> >
> > config PATA_OF_PLATFORM
> > tristate "OpenFirmware platform device PATA support"
> > - depends on PATA_PLATFORM && OF
> > + depends on OF
> > + select PATA_PLATFORM
>
> Can't we just kill the kconfig option?
>
No, as there are a couple defconfigs which have this option enabled.
So the plan is once this patch is merged for the send in the patches
for defconfig files for next release and a release later we can safely
drop this. So that we don't break anything.
> > help
> > This option enables support for generic directly connected ATA
> > devices commonly found on embedded systems with OpenFirmware
>
>
> > diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
> > index cb3134bf88eb..b8d8d51bc562 100644
> > --- a/drivers/ata/pata_platform.c
> > +++ b/drivers/ata/pata_platform.c
> > @@ -11,21 +11,42 @@
> > * License. See the file "COPYING" in the main directory of this archive
> > * for more details.
> > */
> > -#include <linux/kernel.h>
> > -#include <linux/module.h>
> > -#include <linux/blkdev.h>
> > -#include <scsi/scsi_host.h>
> > #include <linux/ata.h>
> > +#include <linux/ata_platform.h>
> > +#include <linux/blkdev.h>
> > +#include <linux/kernel.h>
> > #include <linux/libata.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > #include <linux/platform_device.h>
> > -#include <linux/ata_platform.h>
> > +#include <scsi/scsi_host.h>
> >
> > #define DRV_NAME "pata_platform"
> > #define DRV_VERSION "1.2"
> >
> > static int pio_mask = 1;
> > module_param(pio_mask, int, 0);
> > -MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default");
> > +MODULE_PARM_DESC(pio_mask, "PIO modes supported, mode 0 only by default (param valid only for non DT users)");
> > +
> > +/**
> > + * struct pata_platform_priv - Private info
> > + * @io_res: Resource representing I/O base
> > + * @ctl_res: Resource representing CTL base
> > + * @irq_res: Resource representing IRQ and its flags
> > + * @ioport_shift: I/O port shift
> > + * @mask: PIO mask
> > + * @sht: scsi_host_template to use when registering
> > + * @use16bit: Flag to indicate 16-bit IO instead of 32-bit
> > + */
> > +struct pata_platform_priv {
> > + struct resource *io_res;
> > + struct resource *ctl_res;
> > + struct resource *irq_res;
> > + unsigned int ioport_shift;
> > + int mask;
> > + struct scsi_host_template *sht;
> > + bool use16bit;
> > +};
> >
> > /*
> > * Provide our own set_mode() as we don't want to change anything that has
> > @@ -66,15 +87,9 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
> > }
> >
> > /**
> > - * __pata_platform_probe - attach a platform interface
> > + * pata_platform_host_activate - attach a platform interface
> > * @dev: device
> > - * @io_res: Resource representing I/O base
> > - * @ctl_res: Resource representing CTL base
> > - * @irq_res: Resource representing IRQ and its flags
> > - * @ioport_shift: I/O port shift
> > - * @__pio_mask: PIO mask
> > - * @sht: scsi_host_template to use when registering
> > - * @use16bit: Flag to indicate 16-bit IO instead of 32-bit
> > + * @priv: Pointer to struct pata_platform_priv
> > *
> > * Register a platform bus IDE interface. Such interfaces are PIO and we
> > * assume do not support IRQ sharing.
> > @@ -94,10 +109,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr,
> > *
> > * If no IRQ resource is present, PIO polling mode is used instead.
> > */
> > -int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > - struct resource *ctl_res, struct resource *irq_res,
> > - unsigned int ioport_shift, int __pio_mask,
> > - struct scsi_host_template *sht, bool use16bit)
> > +static int pata_platform_host_activate(struct device *dev, struct pata_platform_priv *priv)
> > {
> > struct ata_host *host;
> > struct ata_port *ap;
> > @@ -108,15 +120,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > /*
> > * Check for MMIO
> > */
> > - mmio = (( io_res->flags == IORESOURCE_MEM) &&
> > - (ctl_res->flags == IORESOURCE_MEM));
> > + mmio = ((priv->io_res->flags == IORESOURCE_MEM) &&
> > + (priv->ctl_res->flags == IORESOURCE_MEM));
> >
> > /*
> > * And the IRQ
> > */
> > - if (irq_res && irq_res->start > 0) {
> > - irq = irq_res->start;
> > - irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
> > + if (priv->irq_res && priv->irq_res->start > 0) {
> > + irq = priv->irq_res->start;
> > + irq_flags = (priv->irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
> > }
> >
> > /*
> > @@ -131,12 +143,12 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > ap->ops->inherits = &ata_sff_port_ops;
> > ap->ops->cable_detect = ata_cable_unknown;
> > ap->ops->set_mode = pata_platform_set_mode;
> > - if (use16bit)
> > + if (priv->use16bit)
> > ap->ops->sff_data_xfer = ata_sff_data_xfer;
> > else
> > ap->ops->sff_data_xfer = ata_sff_data_xfer32;
> >
> > - ap->pio_mask = __pio_mask;
> > + ap->pio_mask = priv->mask;
> > ap->flags |= ATA_FLAG_SLAVE_POSS;
> >
> > /*
> > @@ -151,15 +163,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> > * Handle the MMIO case
> > */
> > if (mmio) {
> > - ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
> > - resource_size(io_res));
> > - ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
> > - resource_size(ctl_res));
> > + ap->ioaddr.cmd_addr = devm_ioremap(dev, priv->io_res->start,
> > + resource_size(priv->io_res));
> > + ap->ioaddr.ctl_addr = devm_ioremap(dev, priv->ctl_res->start,
> > + resource_size(priv->ctl_res));
> > } else {
> > - ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
> > - resource_size(io_res));
> > - ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
> > - resource_size(ctl_res));
> > + ap->ioaddr.cmd_addr = devm_ioport_map(dev, priv->io_res->start,
> > + resource_size(priv->io_res));
> > + ap->ioaddr.ctl_addr = devm_ioport_map(dev, priv->ctl_res->start,
> > + resource_size(priv->ctl_res));
> > }
> > if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
> > dev_err(dev, "failed to map IO/CTL base\n");
> > @@ -168,23 +180,83 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res,
> >
> > ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
> >
> > - pata_platform_setup_port(&ap->ioaddr, ioport_shift);
> > + pata_platform_setup_port(&ap->ioaddr, priv->ioport_shift);
> >
> > ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
> > - (unsigned long long)io_res->start,
> > - (unsigned long long)ctl_res->start);
> > + (unsigned long long)priv->io_res->start,
> > + (unsigned long long)priv->ctl_res->start);
> >
> > /* activate */
> > return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
> > - irq_flags, sht);
> > + irq_flags, priv->sht);
> > }
> > -EXPORT_SYMBOL_GPL(__pata_platform_probe);
> >
> > -static int pata_platform_probe(struct platform_device *pdev)
> > +static int pata_of_platform_get_pdata(struct platform_device *ofdev,
> > + struct pata_platform_priv *priv)
> > {
> > - struct resource *io_res;
> > + struct device_node *dn = ofdev->dev.of_node;
> > struct resource *ctl_res;
> > struct resource *irq_res;
> > + struct resource *io_res;
> > + int pio_mode = 0;
> > + int irq;
> > + int ret;
> > +
> > + ctl_res = devm_kzalloc(&ofdev->dev, sizeof(*ctl_res), GFP_KERNEL);
> > + io_res = devm_kzalloc(&ofdev->dev, sizeof(*io_res), GFP_KERNEL);
> > + irq_res = devm_kzalloc(&ofdev->dev, sizeof(*irq_res), GFP_KERNEL);
> > + if (!ctl_res || !io_res || !irq_res)
> > + return -ENOMEM;
> > +
> > + ret = of_address_to_resource(dn, 0, io_res);
> > + if (ret) {
> > + dev_err(&ofdev->dev, "can't get IO address from device tree\n");
> > + return -EINVAL;
> > + }
> > + priv->io_res = io_res;
> > +
> > + ret = of_address_to_resource(dn, 1, ctl_res);
> > + if (ret) {
> > + dev_err(&ofdev->dev, "can't get CTL address from device tree\n");
> > + return -EINVAL;
> > + }
> > + priv->ctl_res = ctl_res;
> > +
> > + irq = platform_get_irq_optional(ofdev, 0);
> > + if (irq <= 0 && irq != -ENXIO)
> > + return irq ? irq : -ENXIO;
> > +
> > + if (irq > 0) {
> > + irq_res->start = irq;
> > + irq_res->end = irq;
> > + irq_res->flags = IORESOURCE_IRQ | irq_get_trigger_type(irq);
>
> Though of_irq_to_resource() does the same thing, I think the irq code
> handles the flags automatically for DT.
>
sorry you mean to drop the flags?
> > + priv->irq_res = irq_res;
> > + } else {
> > + devm_kfree(&ofdev->dev, io_res);
>
> Is this supposed to be irq_res? Otherwise, there shouldn't be any need
> to free a devres allocation.
>
Oops, yes that should have been irq_res.
Cheers,
Prabhakar
> > + }
> > +
> > + of_property_read_u32(dn, "reg-shift", &priv->ioport_shift);
> > +
> > + if (!of_property_read_u32(dn, "pio-mode", &pio_mode)) {
> > + if (pio_mode > 6) {
> > + dev_err(&ofdev->dev, "invalid pio-mode\n");
> > + return -EINVAL;
> > + }
> > + } else {
> > + dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n");
> > + }
> > +
> > + priv->use16bit = of_property_read_bool(dn, "ata-generic,use16bit");
> > +
> > + priv->mask = 1 << pio_mode;
> > + priv->mask |= (1 << pio_mode) - 1;
> > +
> > + return 0;
> > +}
> > +
> > +static int pata_platform_get_pdata(struct platform_device *pdev,
> > + struct pata_platform_priv *priv)
> > +{
> > struct pata_platform_info *pp_info = dev_get_platdata(&pdev->dev);
> >
> > /*
> > @@ -198,32 +270,63 @@ static int pata_platform_probe(struct platform_device *pdev)
> > /*
> > * Get the I/O base first
> > */
> > - io_res = platform_get_mem_or_io(pdev, 0);
> > - if (unlikely(!io_res))
> > + priv->io_res = platform_get_mem_or_io(pdev, 0);
> > + if (unlikely(!priv->io_res))
> > return -EINVAL;
> >
> > /*
> > * Then the CTL base
> > */
> > - ctl_res = platform_get_mem_or_io(pdev, 1);
> > - if (unlikely(!ctl_res))
> > + priv->ctl_res = platform_get_mem_or_io(pdev, 1);
> > + if (unlikely(!priv->ctl_res))
> > return -EINVAL;
> >
> > /*
> > * And the IRQ
> > */
> > - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > + priv->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> > +
> > + priv->ioport_shift = pp_info ? pp_info->ioport_shift : 0;
> > + priv->mask = pio_mask;
> > + priv->use16bit = false;
> >
> > - return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
> > - pp_info ? pp_info->ioport_shift : 0,
> > - pio_mask, &pata_platform_sht, false);
> > + return 0;
> > +}
> > +
> > +static int pata_platform_probe(struct platform_device *pdev)
> > +{
> > + struct pata_platform_priv *priv;
> > + int ret;
> > +
> > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + if (!dev_of_node(&pdev->dev))
> > + ret = pata_platform_get_pdata(pdev, priv);
> > + else
> > + ret = pata_of_platform_get_pdata(pdev, priv);
> > +
> > + if (ret)
> > + return ret;
> > +
> > + priv->sht = &pata_platform_sht;
> > +
> > + return pata_platform_host_activate(&pdev->dev, priv);
> > }
> >
> > +static const struct of_device_id pata_of_platform_match[] = {
> > + { .compatible = "ata-generic", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, pata_of_platform_match);
> > +
> > static struct platform_driver pata_platform_driver = {
> > .probe = pata_platform_probe,
> > .remove = ata_platform_remove_one,
> > .driver = {
> > .name = DRV_NAME,
> > + .of_match_table = pata_of_platform_match,
> > },
> > };
> >
> > diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h
> > index 9cafec92282d..91b8529e6712 100644
> > --- a/include/linux/ata_platform.h
> > +++ b/include/linux/ata_platform.h
> > @@ -13,15 +13,6 @@ struct pata_platform_info {
> >
> > struct scsi_host_template;
> >
> > -extern int __pata_platform_probe(struct device *dev,
> > - struct resource *io_res,
> > - struct resource *ctl_res,
> > - struct resource *irq_res,
> > - unsigned int ioport_shift,
> > - int __pio_mask,
> > - struct scsi_host_template *sht,
> > - bool use16bit);
> > -
> > /*
> > * Marvell SATA private data
> > */
> > --
> > 2.17.1
> >
Powered by blists - more mailing lists