[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHCN7xLqE_JWNt0L0KD-MMK-3pSKpCRrQtA+azPntM80vEfrNg@mail.gmail.com>
Date: Fri, 17 Dec 2021 10:58:40 -0600
From: Adam Ford <aford173@...il.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: arm-soc <linux-arm-kernel@...ts.infradead.org>,
Tim Harvey <tharvey@...eworks.com>,
Adam Ford-BE <aford@...conembedded.com>,
Michael Trimarchi <michael@...rulasolutions.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Lucas Stach <l.stach@...gutronix.de>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH V5 0/9] arm64: imx8mn: Enable more imx8m Nano functions
On Thu, Dec 16, 2021 at 9:13 PM Shawn Guo <shawnguo@...nel.org> wrote:
>
> On Tue, Dec 14, 2021 at 06:46:17PM -0600, Adam Ford wrote:
> > The i.MX8M Nano is similar to the i.MX8M Mini in some ways, but very
> > different in others. With the blk-ctrl driver for Mini in place,
> > this series expands the blk-ctrl driver to support the Nano which
> > opens the door for additional functions in the future. As part of
> > this series, it also addresses some issues in the GPCv2 driver and
> > finally adds support for enabling USB and GPU.
> >
> > V5: Clean up the GPU clock assignments.
> > V4: Rebase on top of [1] which fixes hangs caused from CSI and DSI reset
> > and add the same fixes for CSI and DSI to the Nano
> > V3: Fixes an the yaml example
> > V2: Fixes the clock count in the blk-ctrl
> >
> > [1] - https://www.spinics.net/lists/arm-kernel/msg936266.html
> >
> > Adam Ford (9):
> > soc: imx: gpcv2: keep i.MX8MN gpumix bus clock enabled
> > soc: imx: gpcv2: Add dispmix and mipi domains to imx8mn
> > dt-bindings: power: imx8mn: add defines for DISP blk-ctrl domains
> > dt-bindings: soc: add binding for i.MX8MN DISP blk-ctrl
> > soc: imx: imx8m-blk-ctrl: add i.MX8MN DISP blk-ctrl
> > arm64: dts: imx8mn: add GPC node
> > arm64: dts: imx8mn: put USB controller into power-domains
> > arm64: dts: imx8mn: add DISP blk-ctrl
> > arm64: dts: imx8mn: Enable GPU
>
> The series introduces hard dependency between different branches. To
> ease the merge process, let's postpone the DTS patches to the next
> cycle.
That's fine.
Do I need to resubmit later, or will you take care of it when the next
merge window opens?
adam
>
> Shawn
Powered by blists - more mailing lists