linux-kernel - [PATCH 2/9] staging: r8188: remove sizes from power transition arrays

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20211219183926.4746-3-martin@kaiser.cx>
Date:   Sun, 19 Dec 2021 19:39:19 +0100
From:   Martin Kaiser <martin@...ser.cx>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Larry Finger <Larry.Finger@...inger.net>,
        Phillip Potter <phil@...lpotter.co.uk>,
        Michael Straube <straube.linux@...il.com>,
        linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
        Martin Kaiser <martin@...ser.cx>
Subject: [PATCH 2/9] staging: r8188: remove sizes from power transition arrays

There's no need to set the array size explicitly if an array is
initialized with a constant value. Remove the array sizes and
related definitions for the power transition arrays.

Signed-off-by: Martin Kaiser <martin@...ser.cx>
---
 drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c     |  6 +++---
 drivers/staging/r8188eu/include/Hal8188EPwrSeq.h | 12 +++---------
 2 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c b/drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c
index a1b6f551f3e0..0332286c1fa9 100644
--- a/drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c
+++ b/drivers/staging/r8188eu/hal/Hal8188EPwrSeq.c
@@ -8,21 +8,21 @@
     drivers should parse below arrays and do the corresponding actions
 */
 /* 3 Power on  Array */
-struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_power_on_flow[] = {
 	RTL8188E_TRANS_CARDEMU_TO_ACT
 	RTL8188E_TRANS_END
 };
 
 /* 3Card Disable Array */
 struct wl_pwr_cfg
-rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS + RTL8188E_TRANS_CARDEMU_TO_CARDDIS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+rtl8188E_card_disable_flow[] = {
 	RTL8188E_TRANS_ACT_TO_CARDEMU
 	RTL8188E_TRANS_CARDEMU_TO_CARDDIS
 	RTL8188E_TRANS_END
 };
 
 /* 3 Enter LPS */
-struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS + RTL8188E_TRANS_END_STEPS] = {
+struct wl_pwr_cfg rtl8188E_enter_lps_flow[] = {
 	/* FW behavior */
 	RTL8188E_TRANS_ACT_TO_LPS
 	RTL8188E_TRANS_END
diff --git a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
index adfba36d4f52..d36a2ab2ec7b 100644
--- a/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
+++ b/drivers/staging/r8188eu/include/Hal8188EPwrSeq.h
@@ -6,12 +6,6 @@
 
 #include "HalPwrSeqCmd.h"
 
-#define	RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS	10
-#define	RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS	10
-#define	RTL8188E_TRANS_CARDEMU_TO_CARDDIS_STEPS	10
-#define	RTL8188E_TRANS_ACT_TO_LPS_STEPS		15
-#define	RTL8188E_TRANS_END_STEPS		1
-
 #define RTL8188E_TRANS_CARDEMU_TO_ACT														\
 	/* format */																\
 	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, comments here*/								\
@@ -64,8 +58,8 @@
 	/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },  comments here*/					\
 	{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,0, PWR_CMD_END, 0, 0}, /*  */
 
-extern struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_card_disable_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS+RTL8188E_TRANS_CARDEMU_TO_CARDDIS_STEPS+RTL8188E_TRANS_END_STEPS];
-extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS+RTL8188E_TRANS_END_STEPS];
+extern struct wl_pwr_cfg rtl8188E_power_on_flow[];
+extern struct wl_pwr_cfg rtl8188E_card_disable_flow[];
+extern struct wl_pwr_cfg rtl8188E_enter_lps_flow[];
 
 #endif /* __HAL8188EPWRSEQ_H__ */
-- 
2.20.1